Hampshire · England
Bathroom Resealing in Swanmore
Bath, shower, basin, wet room, worktop and sink resealing in Swanmore, with a 12-month guarantee on every job. Ask us for a quote.
- Water getting behind the kitchen upstand
- Black spots spreading through the bead
- Cracked, shrunken or lifting silicone
What affects the quote in Swanmore
The price is agreed before any work begins. It’s based on:
- The number of rooms or windows
- Any working-time requirements on site
- Whether the work is at height
- The type of sealant required
What you pay reflects the work, not guesswork. That is why we ask about the job first and give you a clear price before we start.
What to tell us for a quote
To make quoting easier, let us know:
- A few pictures by email, if you can
- The rough size of the job
- The address or postcode of the job
- Access, such as stairs, a lift or height
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we’ll talk you through the work and give you a clear price.
Bathroom resealing for homes and businesses in Swanmore
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. If you have a joint torn by a bath that flexes and leaking joints on a shower screen, we can help, whatever the surface.
In a smaller place like Swanmore, homes are mostly houses and bungalows rather than flats, some older and some much newer. Sealant and grout wear out here just as they do in a big town.
We stand behind the work with a one-year guarantee, so you’re not left on your own once the job is done.
- Where
- Swanmore (SO32)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Swanmore: your questions answered
Is Swanmore within the area you cover?
Yes, Swanmore is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Botley station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll send you a clear quote.
What does bathroom resealing cost?
Size, access and the old material all affect the cost. Call for a quick quote.
Do you do kitchens as well as bathrooms?
Yes. Next to the sink we use a food-safe product where it’s needed.
When can I use the bath or shower again?
Around 24 hours is typical, and we confirm the time for the product used. Using it sooner can damage the bead.
Can mouldy silicone be sorted out?
Yes. Once mould has grown into the silicone, it usually can’t be cleaned out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
Is white the only colour available?
Most people choose white or clear, but other colours can be used to suit tiles and worktops. Tell us what you’d like when you get in touch.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. Indoors, that normally means someone at home.
The process
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it usually takes around two hours for one bath or shower, longer for a whole bathroom. A visit to Swanmore is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- Mention any tricky access
- Keep pets and children clear of the area while we work
- Clear items away from the joints we are working on
Ask for a quote
For a quote, call 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before any work starts.
Read more
Surface by surface
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They’re resealed with anti-fungal sanitary silicone, working on the surface joints, not the tanking or drainage.
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. We reseal it along with the base of the enclosure, following the enclosure maker’s guidance on which side to seal.
What we’re called out for in Swanmore
Sealing over old silicone is one of the commonest mistakes we find. Fresh silicone can’t grip the old bead underneath, so it lifts, lets water in and traps mould underneath.
Keep an eye out for these signs:
- Gaps where the bath or tray has moved
- Cracked, shrunken or lifting silicone
- A messy, uneven bead from a previous reseal
- Leaks into the floor or ceiling below
If you live in an older home near Church of St Barnabas, walls and floors in older homes can move, and sealant and grout show it first.
What to look for in a quote
- When the joint can take water or movement
- Is the old sealant removed completely?
- Are they insured?
- The length of the guarantee
Bathrooms and kitchens in Swanmore
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
For site and facilities teams at buildings such as Swanmore Church of England Aided Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Rented homes near Botley station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Swanmore is about 6 miles east of Hedge End, in Hampshire. From the centre of Swanmore to the outskirts, bathroom resealing is available for homes and businesses alike. Swanmore is one of 683 places in Hampshire where we work for bathroom resealing. There’s also a page for Southampton, about 9 miles away.
Every address in SO32 is covered for bathroom resealing. We cover properties on Church Road, Myers Close and Spring Vale and the roads around them. If you are just outside Swanmore, we cover Hill Grove (1 mile east), Upper Swanmore (1 mile north-east), Mislingford (1 mile south-east), Shirrell Heath (1 mile south) and Kingsmead (2 miles south-east). Larger places within reach include Winchester (10 miles north-west), Gosport (10 miles south), Havant (10 miles south-east), Eastleigh (7 miles west), Fareham (6 miles south) and Horndean (8 miles east).
What’s near Swanmore
Typical jobs here are in homes near Swanmore College of Technology and the streets around them. For rail, the closest station is Botley station, roughly 3.7 miles south-west of the centre. Nearby you will also find Bishop's Waltham Museum (1.7 miles north-west) and Knowle Hospital (4.3 miles south). Open spaces near Swanmore include Beacon Hill and Bishops Waltham Branch LNR.
Towns and villages near Swanmore
Other services in Swanmore
Why it’s worth doing now in Swanmore
Sorting it now is quick: the work takes two to three hours for a typical bath, depending on how much old sealant there is. Left until water gets through, the job can grow to lifting panels, drying out and decorating. In a smaller place like Swanmore, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts.
What you get with us
- 20+ years of sealant experience
- Homes, businesses and hotels
- Anti-fungal silicone where joints get wet
- Quality sealants from Arbo and Everbuild
Take a look at how sealant jobs are priced and what customers say.
Work for landlords, hotels and businesses
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Don’t let bottles sit on the bead
- Keep the fan on for a while after bathing
- Wait for the cure time we give you
- Check the joints every few months for splits or lifting
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Avoid scouring pads and anything sharp, because a damaged bead gives mould a foothold.
Worktop joints fail quietly. Splashes run behind the back edge and soak into the worktop, where it can make the board swell. Resealing before that happens protects the worktop.