Oxfordshire · England

Bathroom & kitchen resealing in Stoke Lyne, Oxfordshire

Our applicators work in Stoke Lyne on bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.

  • Water getting behind the kitchen upstand
  • Failed sealant on the screen profile
  • Gaps where the bath or tray has moved

Bathroom resealing near Stoke Lyne

Bathroom resealing around Stoke Lyne

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

In the older streets around Church of St Peter, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

Stoke Lyne is about 3 miles north of Bicester, in Oxfordshire. We provide bathroom resealing to homes and businesses in Stoke Lyne and nearby. Stoke Lyne is one of 443 places in Oxfordshire where we work. Our Oxford page covers work nearby, about 14 miles away.

All of OX27 is within our area for bathroom resealing. Close by, we work in Hardwick (1 mile north-east), Bucknell (2 miles south), Hethe (2 miles north-east), Fringford (2 miles east) and Caversfield (2 miles south-east). Larger places within reach include Oxford (14 miles south), Banbury (11 miles north-west), Bicester (3 miles south), Kidlington (10 miles south-west), Headington Quarry (13 miles south) and Bure Park (3 miles south).

Near you in Stoke Lyne

Typical jobs here are in homes near Peyton Arms, among other places. For rail, the closest station is Bicester North station, roughly 3.4 miles south. Other landmarks nearby include Bicester Community Hospital (3.8 miles south) and Ardley Castle (1.8 miles west). The countryside around Stoke Lyne includes Graven Hill.

Map of Stoke Lyne © OpenStreetMap contributors

Bathroom resealing for homes and businesses in Stoke Lyne

Sealant is the soft line between a bath, shower or worktop and the wall. When it splits, shrinks or turns black, water gets behind it into walls, panels and floors. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. We work on sinks & splashbacks, baths and wet rooms, and the jobs we see most are leaks into the floor or ceiling below and shrunken sealant along the back of a worktop.

Homes around Stoke Lyne are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.

All of our work is guaranteed for twelve months, in Stoke Lyne and everywhere else we cover.

Place
Stoke Lyne (OX27)
Region
Oxfordshire
Cover
A year, on every job
Price
A clear price before we start
Telephone
0345 464 0079
Updated
26 October 2026
Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom

What we can’t put right

We will always be straight with you, so here’s what new sealant won’t do:

  • Cracked or missing grout between tiles (that’s regrouting)
  • A bath or tray that moves because it isn’t properly supported
  • A cracked shower tray or bath (that needs repair or replacement)

If in doubt, call 0345 464 0079 or drop us an email and we will say what we think before booking.

Joints and surfaces we work on

  • Shower trays & enclosures
  • Kitchen worktops & upstands
  • Sinks & splashbacks
  • Basins & vanity units
  • Wet rooms
  • Baths

Common problems we fix in Stoke Lyne

No sealant lasts indefinitely. Every shower, every splash and every wipe with a cleaner take their toll over the years, so its life depends on how the room is used, cleaned and aired.

People generally contact us after spotting something like this:

  • Leaking joints on a shower screen
  • Gaps between the worktop and the wall
  • Gaps where the bath or tray has moved
  • Sealant that has split, shrunk or peeled away

Letting a property close to Bicester North station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.

What to look for in a quote

  • When the joint can take water or movement
  • What product goes in the joint
  • What happens if the job turns out different
  • How much experience the applicator has

Our hiring checklist

What affects the cost of bathroom resealing

Your quote is based on your job. We look at:

  • Mould in or behind the old joints
  • The old material and how stubborn it is
  • How many areas need sealing
  • Working hours on commercial sites

There are no prices on our website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.

Helping us quote

The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:

  • Photos by email, if that’s easy
  • The problem you’ve noticed
  • The rough size of the job
  • Any previous sealing or DIY work

Every job is quoted individually. Simply call 0345 464 0079 or send us an email and describe the job and send pictures if you have them.

How it works

At the end, we look at the finished work together. The visit itself generally takes a couple of hours for a single bath or shower, depending on the size of the job. In a small place like Stoke Lyne, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. First, each joint is checked for movement and signs of water.
  2. Every trace of the old bead is removed, including the thin smear on the tiles.
  3. Joints are degreased and any mould is treated.
  4. With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
  5. We tool the bead to a neat finish and give you the cure time, normally around 24 hours.

How to prepare

  • Let us know about parking restrictions
  • Let us know about earlier repairs to the joints
  • Try not to wet indoor joints just before the visit

Getting a quote

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, phone 0345 464 0079 or send us an email.

Ask for a quote

Related advice

What the job involves on each surface

Baths

The long joint down the side of a bath is where most leaks start, especially under a shower. We finish it with a single, even bead of anti-fungal silicone.

Kitchen worktops & upstands

Worktop joints get wet and wiped every day. We seal them in a colour that suits the worktop.

Can I do it myself?

Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.

Questions from Stoke Lyne

Do you cover Stoke Lyne for bathroom resealing?

Yes. Our work covers London and the South East, and Stoke Lyne is part of that. Just call 0345 464 0079 or send us an email with a few details of the job.

Can you help a landlord with a rental near Bicester North station?

Yes. We work for landlords and letting agents as well as householders, and several properties can go on one quote. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.

Will it make a mess?

No. We work neatly, protect the area around the joints and tidy up afterwards.

Can I do it myself?

Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.

Do you reseal kitchen worktops and sinks too?

Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then we reseal in a colour to suit.

Is it OK to put new sealant on top of the old bead?

No. It’s a common reason for reseals failing. The old joint is stripped, cleaned and resealed from scratch.

When can I use the bath or shower again?

The surface skins over fairly quickly, but the bead needs longer to cure right through. Keep water off it for around 24 hours, or follow the cure time we give you.

How do I get a quote for bathroom resealing in Stoke Lyne?

There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.

What happens if it’s left?

A clean new bead makes a room look cared for, which matters if you’re letting a property or selling it. Lumpy sealant with smears on the tiles has the opposite effect. Older cottages and farmhouses around Stoke Lyne can have timber floors and frames, and water through a failed joint can rot timber if it’s left.

Doing several joints on one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.

Why Stoke Lyne clients choose us

  • Arbo and Everbuild products
  • White, clear, grey or another colour, product permitting
  • Full insurance on every job
  • Anti-fungal sanitary silicone in wet areas

See what affects the cost and what customers say.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job