Aberdeenshire · Scotland

Bathroom & kitchen resealing in Lumphanan, Aberdeenshire

Bath, shower, basin, wet room, worktop and sink resealing for Lumphanan, backed by a 12-month guarantee. Ask us for a quote.

  • Leaks into the floor or ceiling below
  • New sealant laid over old sealant that is now lifting
  • Leaking joints on a shower screen

Need bathroom resealing in Lumphanan?

Common problems we fix in Lumphanan

Baths and trays move. Acrylic in particular gives slightly under the weight of water and a person, while a poorly supported tray can shift underfoot. Over time the joint tears or pulls away from the tile.

Any of these means the joints need attention:

  • Splits where the tray meets the wall
  • Damp behind the bath or under the tray
  • Two layers of silicone, both failing
  • Sealant that has split, shrunk or peeled away

In and around Lumphanan, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.

What to look for in a quote

  • What happens if the job turns out different
  • How the colour is chosen
  • How the joint is cleaned and prepared
  • Who does the work, and how experienced they are

How to choose a mastic man

About our bathroom resealing in Lumphanan

The secret of a lasting bead is the preparation. The old sealant is removed to the last smear, after which the joint is degreased and any mould treated. Only once it’s dry does the new bead go on. If you have water getting behind the bath panel and a joint torn by a bath that flexes, we can help, whatever the surface.

In and around a place like Lumphanan, homes range from older stone-built properties to newer houses. Where a building moves, cracked grout and split sealant are generally the first signs.

We guarantee the work for a year. If something isn’t right with it in that time, tell us and we’ll put it right.

Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom
Place
Lumphanan (AB31)
Region
Aberdeenshire
Guarantee
One year on every job
Price
A clear price before work begins
Email
info@mrmastic.co.uk
Page updated
26 October 2026

What happens on the day

On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The work itself takes two to three hours for a typical bath, depending on how much old sealant there is. Outside jobs in Lumphanan need a dry day, because sealant won’t bond to a wet joint, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.

  1. We start by protecting the area and stripping out the old bead.
  2. The joint is cleaned, degreased and treated for mould.
  3. The joint is left to dry, and baths are filled with water first.
  4. New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
  5. Finally we tidy up and explain the cure time before we leave.

How to prepare

  • For indoor joints, keep the area dry beforehand if you can
  • Let us know if you’ve seen damp or leaks
  • Let us know about stairs, lifts or work at height

Getting a quote

Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we will take it from there.

Ask for a quote

Advice

What affects the quote in Lumphanan

There’s no set price list. What we look at:

  • Any working-time requirements on site
  • Whether there’s mould to deal with
  • How easy the joints are to reach
  • The type of sealant required

Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.

What we need to know

Photos help, but a description is a good start. Please mention:

  • A few pictures by email, if you can
  • If it’s domestic, commercial or a hotel
  • What the problem is, such as mould, gaps, leaks or cracking
  • Where the property is

To get a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. You’ll have a clear quote before we start.

What we cannot put right

Honest advice matters more to us than a booking, so here’s what sealant can’t fix:

  • Water getting in through the grout rather than the sealant
  • Leaks from a shower valve, waste or pipework (a plumber’s job)
  • Cracks in the tray itself rather than the joint

Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly before booking.

Where we work in Lumphanan

  • Sinks & splashbacks
  • Wet rooms
  • Shower trays & enclosures
  • Kitchen worktops & upstands
  • Baths
  • Basins & vanity units

Work for landlords, hotels and businesses

Letting agents and landlords in Lumphanan can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for.

We also work for property managers and facilities teams. We can quote a run of properties together, and we are fully insured for the work.

Should I try it myself first?

If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.

What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.

Lumphanan questions

Do you cover Lumphanan for bathroom resealing?

Yes. We work across all of Scotland, and Lumphanan is part of that. Just email us at info@mrmastic.co.uk with a few details of the job.

Is there a guarantee on bathroom resealing in Lumphanan?

All our work, in Lumphanan and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.

Where do you work from?

Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.

Do you hold any approvals?

Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.

Can I add another job to the visit?

Yes. Tell us about everything you’d like done and you will get one quote.

Is white the only colour available?

There’s a choice: white, clear and colours to suit tiles and worktops. We’ll talk it through when we quote.

Can tenants book the work?

Of course. Check with your landlord; we can send the quote to them too.

Will it make a mess?

No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.

Lumphanan homes and their sealant

In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that doesn’t dry out.

For an older house near a landmark such as Stothart Memorial Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.

Lumphanan is about 16 miles south-west of Inverurie, in Aberdeenshire. Wherever you are in the AB31 postcode area, we can carry out bathroom resealing at your property. Across Aberdeenshire, we cover 161 places, and Lumphanan is one of them. For nearby work, see our Aberdeen page, about 21 miles away.

Work in AB31 works the same way as everywhere else we cover. You will find streets such as Craigton Brae, Prospect Terrace and Old Military Road, all of which we cover. If you are just outside Lumphanan, we cover Torphins (3 miles south-east), Kincardine O'Neil (3 miles south), Potarch (5 miles south), Aboyne (5 miles south-west) and Birsemore (6 miles south-west). We also work in nearby towns such as Westhill (15 miles east), Banchory (9 miles south-east), Kemnay (12 miles north-east), Kintore (15 miles north-east), Alford (7 miles north) and Insch (15 miles north).

Around Lumphanan

A little further out are Kincardine O'Neil Hospital (3 miles south) and Craigievar Castle (3.3 miles north). Not far away are Loch of Aboyne and Craiglich.

Map of Lumphanan © OpenStreetMap contributors

Aftercare tips

Once the sealant has cured, a few habits help it last:

  • Squeegee the walls and tray after use
  • Wait for the cure time we give you
  • Look for lifting corners and small gaps now and then
  • Don’t leave water standing on kitchen joints

Mould needs damp, so keep the room aired. Run the extractor fan during and after a shower, so the bead dries out between uses.

Small signs come before a leak: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. If you spot one, it’s time to reseal.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job