East Sussex · England
Bathroom & kitchen resealing in Crowhurst, East Sussex
Bath, shower, basin, wet room, worktop and sink resealing for homeowners, landlords and businesses in Crowhurst. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Shrunken sealant along the back of a worktop
- Sealant that has split, shrunk or peeled away
- Smears of silicone across the tiles
Crowhurst questions
I let a flat near Crowhurst station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or email us and tell us about the property, and we’ll send you a clear quote.
Do you cover Crowhurst for bathroom resealing?
Yes, Crowhurst is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or send us an email and tell us what needs doing, and we’ll give you a clear price.
What should I tell you?
Just the basics: where it is, what you’ve noticed and how we reach it. After that, simply ring 0345 464 0079 or email us.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Will the old sealant be removed?
Yes, always, and completely. New silicone does not stick to old silicone, so the joint is cleaned back first.
How much does bathroom resealing cost in Crowhurst?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You will get a clear quote before we start.
Can I choose the colour of the sealant?
We can use white, clear or a colour to suit. Where the joint is on show, we match it to the surface.
How long before the new sealant can get wet?
Silicone is touch-dry quite quickly, but it takes longer to cure. Leave it around 24 hours before it gets wet, or as long as we advise for that product.
Bathroom resealing in Crowhurst, done properly
A fresh bead of silicone changes how a bathroom looks more than most people expect. Black, patchy sealant makes clean tiles look tired, and a clean white or clear joint fixes it quickly. Just as important, it closes the gaps water would otherwise get through. If you are dealing with cracked, shrunken or lifting silicone and water getting behind the bath panel, we can put it right, on shower trays & enclosures, basins & vanity units and wet rooms alike.
Around Crowhurst, it’s houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Crowhurst (TN33)
- Region
- East Sussex
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Crowhurst homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Rented homes near Crowhurst station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. For an older house near a landmark such as The Parish Church of St George, walls and floors in older homes can move, and sealant and grout show it first.
Crowhurst is about 3 miles north-west of Hastings, in East Sussex. Jobs in Crowhurst get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Crowhurst is one of 289 places in East Sussex we cover for bathroom resealing. There’s also a page for Brighton, roughly 28 miles from Crowhurst.
We cover every part of TN33 for bathroom resealing. Whether your property is on Station Road, Craig Close and Old Forewood Lane or a nearby road, we can help. We also cover the places around Crowhurst: Green Street (1 mile south-east), Hollington (2 miles south-east), Baldslow (2 miles east), Silverhill (3 miles south-east) and Bulverhythe (3 miles south). We also work in nearby towns such as Eastbourne (12 miles south-west), Bexhill-on-Sea (3 miles south-west), Hailsham (11 miles west), St Leonards (3 miles south-east), Polegate (12 miles west) and Hastings Old Town (4 miles south-east).
Local landmarks in Crowhurst
Locally, jobs take us to homes and businesses close to The Plough Inn and Claverham Community College. Crowhurst has its own railway station: Crowhurst station. Well-known places in the area include Hastings Castle (4.2 miles south-east) and Bexhill Hospital (2.8 miles south-west). Not far away are Church Wood and Robsack Wood and Senlac Hill.
What we do, step by step
A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, do the work and clear up. It normally takes around two hours for one bath or shower, longer for a whole bathroom. In a small place like Crowhurst, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by protecting the area and stripping out the old bead.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, generally after around 24 hours.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Where the joints are inside, avoid wetting them before we arrive
- Keep pets and children clear of the area while we work
Ask for a quote
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll talk you through the work and give you a clear quote.
Advice
DIY sealant or a professional job?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
Keeping the joints in good condition
A little care helps the new joints last. We recommend:
- Don’t leave water standing on kitchen joints
- Check the joints every few months for splits or lifting
- Run the extractor fan during and after every shower
- Squeegee the walls and tray after use
Check the sealant now and then. Small splits and lifting ends are easy to catch early, and if anything looks wrong, just ring 0345 464 0079 or drop us an email.
Watch for the early signs: lifting ends, gaps, dark shadows under the bead or a stain downstairs. If you spot one, it’s time to reseal.
For landlords and businesses
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Places near Crowhurst
More services for Crowhurst
Why act early in Crowhurst
Leaving a split or mouldy bead only stores up trouble. Once water is behind the bath, it can reach floorboards, panels and the ceiling underneath, and that’s a far bigger job than a reseal. Where a wall is exposed, as many are in small places like Crowhurst, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
What you get with us
- Domestic, commercial and hotel work
- Arbo and Everbuild products
- You choose the colour before work begins
- Old sealant always removed completely
Read what affects the cost or our reviews.
How the job changes by surface
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. It’s resealed in white, clear or a colour to suit.
When to call us in Crowhurst
A bath shifts a little every time it’s filled and emptied. An acrylic bath flexes under load, and a tray that is not fully bedded can rock. Over time the joint tears or pulls away from the tile.
The problems people normally mention when they call are:
- Leaking joints on a shower screen
- Black spots spreading through the bead
- Gaps between the worktop and the wall
- Sealant that has split, shrunk or peeled away
Schools such as Crowhurst CofE Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Questions to ask before you book
- What the cure time is
- How the surfaces are prepared before sealing
- Are they insured?
- How long the guarantee is