Oxfordshire · England
Bathroom & kitchen resealing in Cassington, Oxfordshire
Problem with your baths, showers and worktops in Cassington? We remove the old material, prepare the joints and seal them properly.
- Splits where the tray meets the wall
- New sealant laid over old sealant that is now lifting
- Black mould in the silicone that will not clean off
Bathroom resealing in Cassington
Sealant that is mouldy, cracked or peeling shouldn’t be left until there’s a leak. Just ring 0345 464 0079 or drop us an email with a photo of the joints, and you will get a clear quote before any work starts. If you are dealing with mouldy sealant that has gone black and smears of silicone across the tiles, we can help, on shower trays & enclosures, basins & vanity units and baths alike.
Somewhere as small as Cassington, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Place
- Cassington (OX29)
- Region
- Oxfordshire
- Cover
- 12 months on all our work
- Price
- A clear price before we start
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
The process
We bring everything the job needs with us. Once we’ve agreed what’s being done, we protect the area and start. It normally takes around two hours for one bath or shower, longer for a whole bathroom. For a village or hamlet like Cassington, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- We let it dry fully and fill the bath with water before sealing.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We tidy up and give you the cure time, generally around 24 hours.
Preparing for the visit
- Move anything stored near the joints
- On commercial sites, let us know about site rules
- Mention any tricky access
Getting a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, phone 0345 464 0079 or send us an email.
Advice
Places near Cassington
Also in Cassington
Why deal with it now?
A failed joint gets more costly to put right the longer it’s left. Once water is behind the bath, it can reach floorboards, panels and the ceiling underneath, and that’s a far bigger job than a reseal. Around Cassington, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Combining jobs into one visit is usually more efficient than separate visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
Why us?
- Fully insured
- ARBOMaster approved applicator
- A sealant colour to suit the surroundings
- Arbo and Everbuild products
How to look after the new joints
No joint lasts for ever, but care makes a real difference. A few tips:
- Do not leave water standing on kitchen joints
- Avoid abrasive pads on the sealant
- Keep an eye on the corners, where splits start
- Wipe the sealant dry after showering
Keep water off the new bead until it has cured, following the cure time we give you. Once it’s cured, wiping it down after use keeps it looking new.
Each shower pushes a little more water through a failed joint. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Early resealing closes the gap before damage is done.
Landlord and commercial work in Cassington
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
What the job involves on each surface
Kitchen worktops & upstands
Worktop joints get wet and wiped every day. We seal them in a colour that suits the worktop, so the line doesn’t stand out.
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so a neat, continuous bead matters.
What we can’t put right
Honest advice matters more to us than a booking, so here’s what new sealant will not do:
- Movement from a bath with loose feet or no proper support
- A cracked shower tray or bath (that needs repair or replacement)
- Cracked or missing grout between tiles (that is regrouting)
If in doubt, call 0345 464 0079 or email us and we will say what we think before booking.
Joints and surfaces we work on
- Sinks & splashbacks
- Basins & vanity units
- Baths
- Kitchen worktops & upstands
- Shower trays & enclosures
- Wet rooms
What we are called out for in Cassington
Mould is the reason many people want their sealant replaced. Steamy rooms that don’t dry out give mould all the damp it needs, and mould that has grown into the silicone usually will not clean off.
The most common problems we see are:
- Splits where the tray meets the wall
- Failed sealant on the screen profile
- Lumpy, uneven sealant from a DIY attempt
- Water getting behind the bath panel
For site and facilities teams at buildings such as St Peter's Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Questions to ask before you book
- What product goes in the joint
- How long the guarantee is
- How the surfaces are prepared before sealing
- How long to leave it before use
What bathroom resealing looks like in Cassington
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Hanborough station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. For an older house near a landmark such as Church of St Peter, older homes can move a little, which is hard on rigid grout and tired sealant.
Cassington is about 6 miles north-west of Oxford, in Oxfordshire. Across the OX29 area, we cover bathroom resealing for homes and businesses. Cassington is one of 443 places in Oxfordshire where we work. You can also see our page for Oxford, roughly 6 miles from Cassington.
Postcode districts we cover here for bathroom resealing: OX29. Local streets include Church Lane, The Green and Pound Lane, all of which we cover. We also cover the places around Cassington: Swinford (1 mile south-west), Eynsham (2 miles south-west), Wytham (2 miles south-east), Farmoor (2 miles south) and Filchampstead (3 miles south). Within a short drive, we also cover Oxford (6 miles south-east), Didcot (13 miles south), Bicester (11 miles north-east), Abingdon-on-Thames (8 miles south), Witney (6 miles west) and Carterton (11 miles west).
What’s near Cassington
Typical jobs here are in homes near Bartholomew School and Chequers Inn. Cassington’s nearest station is Hanborough station, roughly 2.5 miles north-west. Well-known places in the area include Oxford Castle and earlier settlement remains (4.5 miles south-east) and Radcliffe Infirmary (4.1 miles south-east). For a walk, there’s Hook Meadow and The Trap Grounds and Cumnor Hill.
Cassington questions
Is Cassington in your area for bathroom resealing?
Yes. Our work covers London and the South East, and Cassington is part of that. You can call 0345 464 0079 or send us an email and tell us what needs doing, and we’ll give you a clear quote.
Can you help a landlord with a rental near Hanborough station?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.
Is white the only colour available?
White, clear and a range of colours are available. On a worktop we colour-match where the joint shows.
Can I add another job to the visit?
Of course. Doing several areas at once is usually more efficient.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Do I have to be there?
Access is agreed with you when the job is booked. Indoors, that generally means someone at home.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We will tell you what we’re using and why.
Where are you based?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.