West Sussex · England
Albourne Bathroom Resealing
Bathroom resealing in Albourne from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Mouldy sealant that has gone black
- Two layers of silicone, both failing
- Water escaping at the shower enclosure
Bathrooms and kitchens in Albourne
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to The Parish Church of St Bartholomew include some older properties, and walls and floors in older homes can move, and sealant and grout show it first. Letting a property close to Hassocks station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Albourne is about 4 miles south-west of Burgess Hill, in West Sussex. Albourne gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our West Sussex coverage runs to 371 places, and Albourne is one of them. Brighton is on our list too, around 8 miles away.
We work across the BN6 postcode area for bathroom resealing and the streets around it. If you are just outside Albourne, we cover Albourne Street (1 mile east), Albourne Green (1 mile north-east), High Cross (1 mile north-west), Blackstone (1 mile west) and Woodmancote (2 miles south-west). Larger places within reach include Crawley (12 miles north), Horsham (10 miles north-west), Worthing (11 miles south-west), Haywards Heath (7 miles north-east), Burgess Hill (4 miles north-east) and Shoreham-by-Sea (7 miles south).
Near you in Albourne
The closest station to Albourne is Hassocks station, roughly 2.8 miles east of the centre. A little further out are The Dene Hospital (2.9 miles north-east) and The Budding Foundation Museum of Gardening (2.5 miles east). The countryside around Albourne includes Wolstonbury Hill and Woods Mill.
Bathroom resealing in Albourne
A bead that has gone black, split or come away is worth sorting before it lets water through. Just ring 0345 464 0079 or drop us an email with a photo of the joints, and you will get a clear quote before any work starts. Common call-outs are for damp behind the bath or under the tray and leaking joints on a shower screen, on basins & vanity units, shower trays & enclosures and baths.
In a village or hamlet like Albourne, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Every job is covered by our 12-month guarantee, wherever you are in West Sussex.
- Where
- Albourne (BN6)
- Region
- West Sussex
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Places near Albourne
More services for Albourne
What affects the cost of bathroom resealing
We quote each job individually. These are the things that affect it:
- How much there is to do
- The type of sealant required
- When we can work, for business premises
- How easy the joints are to reach
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we’ll go through it with you.
Helping us quote
To help us quote quickly, let us know:
- Access, such as stairs, a lift or height
- The type of property
- Roughly how big the job is
- If someone has resealed it before
For bathroom resealing in Albourne, ring 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
What we can’t put right
We will not take on work that won’t last, so here’s what sealant can’t put right:
- A cracked shower tray or bath (that needs repair or replacement)
- A tray that rocks until it’s re-bedded
- A leaking waste, trap or valve
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think.
Where we work in Albourne
- Shower trays & enclosures
- Kitchen worktops & upstands
- Basins & vanity units
- Wet rooms
- Baths
- Sinks & splashbacks
DIY sealant or a professional job?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so just mention it when you contact us.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Landlord and commercial work in Albourne
Landlords and agents in Albourne can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
We also work for property managers and facilities teams. Several sites can be quoted together, and we’re fully insured.
Signs you need bathroom resealing in Albourne
Black mould is behind a lot of resealing. Steamy rooms that don’t dry out give mould all the damp it needs, and mould that has grown into the silicone normally will not clean off.
Common reasons people contact us include:
- Mouldy sealant that has gone black
- Water escaping at the shower enclosure
- Smears of silicone across the tiles
- Splits where the tray meets the wall
Managing a site like Albourne CofE Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
What to look for in a quote
- How the surfaces are prepared before sealing
- What insurance they hold
- What happens if they find a problem under the old sealant
- How the colour is chosen
What the job involves on each surface
Sinks & splashbacks
Where a splashback meets the worktop, there’s a joint that catches every splash. It’s resealed in white, clear or a colour to suit.
Shower trays & enclosures
If a tray moves underfoot, new silicone won’t last. We check for movement before we reseal, and if the tray needs refixing, we will say so.
What we do, step by step
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The job generally takes half a day or less for one room, longer when the kitchen is included. Somewhere like Albourne needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by protecting the area and stripping out the old bead, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, generally after around 24 hours.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Clear the area around the work
- On commercial sites, let us know about site rules
How to get a quote
To get a quote, phone 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.
Advice
Questions from Albourne
Do you work for landlords with property near Hassocks station?
Yes, we work for landlords and agents. You can call 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before any work starts.
Will you come out to Albourne?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
How much does bathroom resealing cost in Albourne?
Size, access and the old material all affect the cost. Call for a quick quote.
Can you quote for more than one area?
Yes. More than one area can go on one quote.
Does the resealing come with a guarantee?
Yes. We give a 12-month guarantee on every job, and we are fully insured.
Where do you work from?
We are based in Crawley, West Sussex, and we work across South East England, London and Scotland.
Is it worth trying it myself?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Can you get rid of the black mould in my sealant?
Yes. We strip the bead, treat the joint and lay new anti-fungal silicone.