West Berkshire · England
Window & door mastic in Chilton Foliat, West Berkshire
Problem with your window and door frames in Chilton Foliat? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Hard, cracked sealant around windows
- Leaking joints at the ends of sills
- A bead that doesn’t match the frame
About our window mastic in Chilton Foliat
Frames and walls don’t move together. Heat and cold make frames grow and shrink against brick or render that hardly moves. So the sealant has to stretch and recover, which is why we use a low-modulus product. If you have sealant in the wrong colour for the frame and untidy mastic left by window fitters, we can put it right.
Homes in small places like Chilton Foliat often stand in the open, with little to shelter their windows from wind and rain. Exposed frames and sills lose their mastic sooner than sheltered ones.
Our work is backed for twelve months, in Chilton Foliat and everywhere else we cover.
- Place
- Chilton Foliat (RG17)
- Wider area
- West Berkshire
- Cover
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
How the visit works
We work through the job in order: protection first, then preparation, sealing and a tidy-up. For most jobs that takes anything from an hour or two to a full day, depending on how many frames there are and we leave things clean and tidy. Somewhere like Chilton Foliat needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Each frame is looked over and we agree which ones need resealing.
- The old mastic is cut out and scraped back to clean surfaces.
- Where the gap is deep, backing rod goes in first.
- A flexible exterior sealant is applied in a colour to suit the frame.
- We tool each bead neatly and check every joint is closed.
Getting ready for the visit
- For indoor joints, keep the area dry beforehand if you can
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us if parking is tricky
Getting a quote
Need a quote? Please call 0345 464 0079 or email us and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Read more
Chilton Foliat homes and the weather
With historic houses such as Ramsbury Manor (about 4 miles west) nearby, there’s older building stock in the area around Chilton Foliat as well as newer homes. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Homes close to Church of St Mary include some older properties, and replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint. Rented homes near Hungerford station change hands often, and cracked frame mastic tends to show up as a draught or damp complaint, so it’s worth checking between lets.
Chilton Foliat is about 10 miles west of Newbury, in West Berkshire. Anywhere in RG17, we can carry out window mastic at your property. Across West Berkshire, we cover 155 places, Chilton Foliat among them. There’s also a page for Reading, roughly 24 miles from Chilton Foliat.
All of RG17 is within our area for window mastic. You’ll find streets such as Popham Close, Stag Hill and Whitelocks Piece, all of which we cover. Neighbouring places we cover for window mastic include Leverton (1 mile south-east), Upper Eddington (1 mile south-east), Eddington (2 miles south-east), Hungerford (2 miles south-east) and Woodlands St Mary (3 miles north). We also work in nearby towns such as Newbury (10 miles east), Thatcham (12 miles east), Speenhamland (9 miles east), Lambourn (5 miles north), Shaw (10 miles east) and Kingsclere (15 miles south-east).
Around Chilton Foliat
Typical jobs here are in homes near John O'Gaunt School, among other places. The nearest railway station is Hungerford station, roughly 1.7 miles south-east of the centre. Open spaces near Chilton Foliat include Watts Bank.
Landlords, agents and businesses in Chilton Foliat
In hotels, rooms out of use cost money, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Honest limits
New sealant can’t fix everything, and we will tell you before we start. It will not solve:
- Condensation trapped between the panes
- Damp coming through the wall itself rather than the frame joint
- Rotten timber, which needs a joiner first
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think.
Where we work in Chilton Foliat
- Composite doors
- Timber windows & doors
- Window sills
- uPVC windows
- Aluminium frames
- Patio & French doors
Common problems we fix in Chilton Foliat
Joints that are too thin or too deep fail early. A skim of sealant over a wide gap soon tears, while a joint packed solid cannot stretch. That’s what backing rod is for.
Any of these means the joints need attention:
- Cold air getting in at the frame edge
- Mastic that has split away from the wall
- Black, perished sealant on frames
- Cracked sealant at the sill ends
If you look after a building such as Chilton Foliat Church of England Primary School, larger buildings have plenty of frames, and the mastic around each one ages.
Before booking anyone
- Whether all the old sealant comes out first
- What guarantee comes with the work
- Who does the work, and how experienced they are
- Whether the sealant suits the joint
Chilton Foliat questions
Is Chilton Foliat in your area for window mastic?
Yes. We work across London and the South East, and Chilton Foliat is part of that. You can ring 0345 464 0079 or email us and tell us what needs doing, and we will send you a clear quote.
Do you work for landlords with property near Hungerford station?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or email us with the details for a clear quote.
How long before the joint can be used?
Most sealants are touch-dry well before they’re fully cured. We’ll tell you how long to leave the joint before we leave.
Will new mastic stop draughts?
It will if the frame joint is the problem. We check where the draught is before work begins.
What information do you need?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Do you work for hotels and businesses?
Yes, regularly. Larger jobs can be planned room by room or area by area.
Can you do the inside joint as well?
Yes, we do both. Indoors, we seal between the frame and the plaster or reveal, using a paintable sealant if you want to decorate.
Will there be a smell?
It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.
DIY sealant or a professional job?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Air rooms to keep condensation down around windows
- Keep paint off silicone joints
- Use gentle cleaners on frames and sealant
- Keep paint and stain on wooden frames in good order
On timber frames, keep the paintwork in good order, since wood that gets wet swells and shrinks more. Keep paint off the silicone itself.
Signs to watch for: split or missing mastic, gaps, damp patches inside or black mould on the reveal. Any of these is worth a call.
What affects the quote in Chilton Foliat
Your quote is based on your job. We take into account:
- Whether the work is at height
- Any working-time requirements on site
- The type of sealant required
- How much old sealant there is and how hard it is to remove
Doing several joints on one visit usually makes better use of the time than several visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
Helping us quote
Photos help, but a description is a good start. Please mention:
- The address or postcode of the job
- A few photos by email, if you can
- The rough size of the job
- How we’d reach the joints
For a quote, call 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.