Kent · England
Window & door mastic in Benover, Kent
Professional window mastic in and around Benover, with every bit of old sealant taken out first.
- Gaps where the sill meets the wall
- Old mastic that has gone black or come away
- Gaps left after new windows were fitted
About our window mastic in Benover
Most frames have an outside joint and an inside one. The external joint is the weather seal; inside, the joint between frame and plaster stops draughts and tidies the reveal. We seal one or both, depending on what’s needed. If you’re dealing with damp patches on the reveal after heavy rain and rushed sealant from a window installation, we can help, whatever the surface.
Homes in small places like Benover often stand in the open, with little to shelter their windows from wind and rain. Exposed frames and sills lose their mastic sooner than sheltered ones.
You get a one-year guarantee, the same in Benover as everywhere else we work.
- Location
- Benover (ME18)
- Region
- Kent
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Nearby places to Benover
Also in Benover
FAQs for Benover
Is Benover within the area you cover?
Yes, Benover is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you cover Benover for window mastic?
Yes, Benover is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or drop us an email and tell us what needs doing, and we will give you a clear quote.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Is there any odour?
There can be a smell while the sealant cures. Ventilation helps.
Can tenants book the work?
We are happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Do you work on first-floor windows?
Yes, if safe access is possible. For high or awkward windows, we will tell you what access is needed.
When is the sealant fully cured?
Most sealants are touch-dry well before they’re fully cured. We will tell you how long to leave the joint.
Keeping the joints in good condition
After the cure time, these simple habits help:
- Don’t use solvent cleaners on the joint
- Ventilate rooms so frames do not stay wet inside
- Paint up to the joint, not over it
- Make sure the drainage slots are not blocked
Check the drainage slots in the frames aren’t blocked, so rain drains out rather than building up at the sealant.
Look out for the warning signs: split or missing mastic, gaps, damp patches inside or black mould on the reveal. Any of these is worth a call.
What affects the quote in Benover
Jobs vary more than people expect. What affects the quote:
- Any mould that needs treating
- Whether old sealant or filler has to be cut out
- The type of sealant required
- How many rooms, windows or areas are involved
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
What to tell us for a quote
When you call or email, these details help:
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
- Where the job is, and your postcode
To get a quote, ring 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.
Frames and glazing around Benover
The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you let a flat or house near Yalding station, cracked frame mastic tends to show up as a draught or damp complaint, so it’s worth checking between lets. Managing a site like Hunton Church of England Primary School? Then the mastic around its windows and doors needs looking after like any other building’s.
Benover is about 5 miles south-west of Maidstone, in Kent. From the centre of Benover to the outskirts, window mastic is available for homes and businesses alike, from flats and houses to offices and hotels. Benover is one of 922 places in Kent where we work for window mastic. There’s also a page for Crawley, roughly 28 miles from Benover.
Here we cover the ME18 postcode area for window mastic. We also cover the places around Benover: Congelow (1 mile north-west), Yalding (1 mile north), Laddingford (1 mile south-west), Hunton (1 mile east) and Nettlestead Green (2 miles north-west). Within a short drive, we also cover Maidstone (5 miles north-east), Sevenoaks (12 miles north-west), Royal Tunbridge Wells (9 miles south-west), Gravesend (15 miles north), Tonbridge (7 miles west) and Kings Hill (4 miles north).
What’s near Benover
Around Benover, our work takes us to homes and buildings near The Woolpack Inn and the streets around them. The closest station to Benover is Yalding station, about 1.3 miles north-west of the centre. A little further out are Oakwood Hospital (4.4 miles north-east) and Teapot Island (0.9 miles north-west).
Signs you need window mastic in Benover
Plenty of failed mastic was poorly applied in the first place. Mastic laid onto dusty, damp or crumbling surfaces never bonded as it should, and it lets go sooner than it should.
The problems people generally mention when they call include:
- White mastic on grey or black frames
- Draughts coming in around windows and doors
- Damp patches on the reveal after heavy rain
- Mastic that is falling out in pieces
If you live in an older home near St Peter's and St Paul's Church, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
Questions to ask before booking
- What insurance they hold
- What product goes in the joint
- What happens if they find a problem under the old sealant
- How the joint is cleaned and prepared
Why deal with it now?
Redecorating is a good moment to renew the mastic. A clean new bead makes new paint or render look finished. Around Benover, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are unsure, ring 0345 464 0079 or email us for an honest opinion and a quote.
What you get with us
- Neat joints and a tidy finish
- White, clear, grey or another colour, product permitting
- ARBOMaster approved applicator
- Sanitary silicone with an anti-fungal additive in wet areas
See what affects the cost and what customers say.
How the job changes by surface
Timber windows & doors
Timber moves with moisture as well as heat, so the joint must stay flexible. We seal onto sound, dry paintwork or timber.
Aluminium frames
Aluminium needs a sealant that bonds to coated metal, and acetoxy silicones aren’t used, as they can attack some metals. Neutral-cure sealant is the safe choice.
How the visit works
There is not much for you to do on the day. Point us to the joints and we will get on with it. The job generally takes a few hours for a few frames, or a day or more for a whole house. For a village or hamlet like Benover, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We check how each frame can be reached safely.
- Old, cracked mastic is removed completely.
- Frame and wall are cleaned and must be dry before sealing.
- Deep voids are backed, then the sealant is gunned in.
- The joint is shaped to shed water and the area tidied.
How to prepare
- For indoor joints, keep the area dry beforehand if you can
- Let us know about stairs, lifts or work at height
- Clear the area around the work
How to get a quote
Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job.