Southampton · England
Woolston Regrouting
Regrouting for Woolston and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Crumbling grout between the tiles
- Greasy, stained grout behind the hob
- Stained grout that cleaning will not shift
About our regrouting in Woolston
If you’ve been scrubbing grout that will not come clean, the stain is often in the grout itself. Replacing it is the lasting answer, and it’s a chance to change the colour too. We work on bathroom wall tiles, shower walls and wet rooms, and people most often call us about cracked grout along the bath or tray and floor grout that won’t come clean.
In a smaller place like Woolston, homes are mostly houses and bungalows rather than flats, from older cottages to newer builds. Sealant and grout wear out here just as they do in a big town.
A one-year guarantee comes as standard, so you are not left on your own once the job is done.
- Place
- Woolston (SO19, SO14)
- Region
- Southampton
- Cover
- One year on every job
- Price
- A clear price before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Woolston homes and their sealant
Woolston is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Letting a property close to Woolston station? Then a regrout while the flat is empty is quicker than working around a tenant. Homes close to Church of St Mark include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant. Managing a site like Woolston Infant School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Woolston is about 2 miles south-east of Southampton, in Southampton. For regrouting in and around Woolston, it’s easy to get a quote: please call 0345 464 0079 or drop us an email. We’re based in Crawley and cover Southampton, Woolston included. Woolston is one of 40 towns and villages in Southampton where we work.
Our applicators cover all of SO19 and SO14 for regrouting and the streets around it. You will find streets such as Oak Road, Lake Road and Glen Road. You’ll find Woolston on the A3025, so it’s easy for us to get to with everything needed for regrouting. Close by, we work in Weston (1 mile south-east), Netley (2 miles south-east), Butlocks Heath (2 miles south-east), Hound (2 miles south-east) and Old Netley (2 miles east). Further out, we also cover Shirley (3 miles north-west), Regents Park (3 miles north-west), Townhill Park (3 miles north), Chartwell Green (3 miles north-east), Maybush (4 miles north-west) and Coxford (4 miles north-west).
Around Woolston
Around Woolston, our work takes us to homes and buildings near The Admiral Sir Lucius Curtis pub, Chamberlayne College for the Arts and Woolston School. Woolston has its own railway station: Woolston station. A little further out are Gods House Tower - Museum of Archaeology (1.2 miles west) and Netley Castle (1.3 miles south-east). Green spaces nearby include Netley Common.
Towns and villages near Woolston
What else we do in Woolston
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Clean grout with a mild bathroom cleaner
- Get any tile that moves checked promptly
- Wipe water off the walls when you’re done
- Look at the sealant in the corners now and then
Have any tile that moves checked straight away. A loose tile cracks the grout around it and lets water in.
Grout that is washing out of a shower shouldn’t be left. Every shower pushes more water into the gaps, and that water can reach the wall or the floor below.
Quotes for regrouting in Woolston
Call for a quick quote. What matters most is:
- Any working-time requirements on site
- How many rooms, windows or areas are involved
- Whether there’s mould to deal with
- Whether the work is at height
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
When you call or email, these details help:
- Whether it has been sealed before
- Where the property is
- Roughly how big the job is
- The type of property
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you’re ready, phone 0345 464 0079 or send us an email.
What the job involves on each surface
Bathroom floors
New floor grout makes a big difference to how a bathroom looks. Floor-to-wall and bath joints are sealed, not grouted.
Corners and edges
Edges are resealed while we are there, so everything is renewed at once.
Why it’s worth doing now in Woolston
Colouring the surface of old grout is a quick cosmetic fix. They will not fill gaps or keep water out, and stains can show through again. Raking out and regrouting replaces the grout itself. In a smaller place like Woolston, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
Why us?
- Quality sealants from Arbo and Everbuild
- Over 20 years’ experience
- We are fully insured
- Any old sealant cut out fully, not covered over
See what affects the cost and our reviews.
The process
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes a few hours for a shower enclosure, longer for a whole room. For a job in Woolston, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- Every tile area is checked for hollow or loose tiles first.
- We rake out the grout evenly, protecting the tile edges.
- We vacuum the joints so the new grout bonds.
- We regrout the joints and clean the tile faces.
- We finish with silicone in the moving joints.
How to prepare
- Mention any parking rules near the property
- For business premises, tell us about site rules or sign-in
- Let us know about earlier repairs to the joints
Get a quote
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved before giving you a price.
Read more
Woolston: your questions answered
Will you come out to Woolston?
Yes, Woolston is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work in hotels near Woolston?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
Do you grout the corners?
Flexible sealant. Grout belongs between the tiles, while corners and edges need a joint that can move.
What do you put in the joint?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
How do I get a quote for regrouting in Woolston?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote.
Do you take out the old sealant first?
Yes, every time. New sealant won’t bond properly to old, so the joint is cleaned back first.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done.
What do you need from me for a quote?
A short description and the location. If we need more, we will ask.
What we can’t put right
In fairness, there are a few things sealant will not fix:
- Loose tiles, which need refixing first
- Failed tanking or waterproofing under the tiles
- A floor or wall that keeps moving
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly before booking.
Joints and surfaces we work on
- Bathroom floors
- Tiled floors
- Wet rooms
- Shower walls
- Bathroom wall tiles
- Kitchen splashbacks
DIY versus a professional finish
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.