Kent · England
New-build mastic & snagging in Parkgate, Kent
Professional new build mastic in and around Parkgate, with every bit of old sealant taken out first and a 12-month guarantee.
- Gaps between new skirting and floors
- Untidy sealant flagged on a snagging list
- Frame joints opening as the plaster dries
How we handle new build mastic in Parkgate
We never seal over a failed new-build bead. New silicone will not bond to old silicone, so the joint is cut out, cleaned, dried and resealed. If you have gaps between new skirting and floors and shower seals failing in the first year or two, we can help, on windows & doors, skirting & floors and plot handovers alike.
Work in a small place like Parkgate just needs the journey and access planning, and the work itself is the same as on any site.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Parkgate (TN30)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Questions from Parkgate
Is Parkgate within the area you cover?
Yes, Parkgate is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Is there a guarantee on new build mastic in Parkgate?
All our work, in Parkgate and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.
Will you just run a new bead over the existing one?
No. We always remove the existing bead, then clean and prime the joint, and a new bead applied.
Do I need to be at home?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Will you leave a mess?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.
Can landlords and businesses book you?
Yes, regularly. We can quote for several properties at once, and between tenancies is a good time for the work.
Why has my new-build shower seal failed already?
Cracking in the first couple of years is common as timber and plaster dry out. Rushed application on dusty surfaces makes it worse.
Quotes for new build mastic in Parkgate
Every job gets its own quote. This is what makes a difference:
- Any working-time requirements on site
- How many areas need sealing
- Any mould that needs treating
- The old material and how stubborn it is
The cost depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts.
What we need to know
Photos by email are helpful but not essential. Please mention:
- How we’d reach the joints
- The type of property
- How many joints, rooms or windows are involved
- Where the job is, and your postcode
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we will explain what’s involved.
Joints and finishes in Parkgate homes
The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Whether the job is in Parkgate itself or nearby, the right material for each joint matters as much as a neat finish.
Parkgate is about 10 miles south-west of Ashford, in Kent. We carry out new build mastic for homes and businesses in Parkgate. Parkgate is one of 922 towns and villages in Kent we cover for new build mastic. You can also see our page for Crawley, roughly 36 miles from Parkgate.
Every address in TN30 is covered for new build mastic. Whether your property is on Cranbrook Road, Millpond Lane and Tenterden Road or a nearby road, our applicators can take on the job. We also cover the places around Parkgate: Clapper Hill (1 mile north-west), East End (1 mile west), Strood (2 miles south), Fosten Green (2 miles north-west) and London Beach (2 miles north-east). Larger places within reach include Maidstone (14 miles north-west), Ashford (10 miles north-east), Foley Park (15 miles north), Paddock Wood (13 miles north-west), Bearsted (13 miles north) and Park Wood (12 miles north).
Near you in Parkgate
In Parkgate, that means homes and buildings near Wattle Wood and the streets around them. Other landmarks nearby include Mervyn Quinlan Museum (1.5 miles west) and Benenden Hospital (1.5 miles west).
What we are called out for in Parkgate
Sealant applied onto damp surfaces doesn’t bond well. On a busy site, joints aren’t always given time to dry.
It’s worth asking for a quote if you see:
- Messy sealant that spoils new finishes
- Joints pulling apart as timber shrinks
- Plot mastic for developers ahead of handover
- Beads laid onto grit and dust from the build
Around Parkgate, as everywhere, new build mastic is only as good as the preparation behind it.
Questions to ask before booking
- Whether you can choose the colour
- The length of the guarantee
- Are they insured?
- What happens if the job turns out different
Landlords, agents and businesses in Parkgate
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
When something else is needed
We will always be straight with you, so here’s what new sealant won’t do:
- Movement caused by a poorly fitted tray or bath
- Cracked trays, tiles or worktops
- Plumbing faults behind the sealant
If you are not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer.
Joints and surfaces we work on
- Skirting & floors
- Kitchens
- Plot handovers
- Show homes
- Windows & doors
- Bathrooms & en suites
Aftercare tips
Joint life depends on how it’s used and looked after. We suggest:
- Record problems with dated pictures
- Wipe joints with warm soapy water
- Report sealant problems to your builder during the snagging period
- Ventilate bathrooms well, especially in the first year
Clean the sealant with a mild detergent and a soft cloth. Avoid abrasive pads and strong solvents.
A seal that splits early is often a sign of movement. Have it resealed, and the tray or bath checked, before it gets worse.
How the visit works
There isn’t much for you to do on the day. Show us the job and we’ll take it from there. The job generally takes anything from a few hours to several days, depending on the number of plots, including the tidy-up. Somewhere like Parkgate needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We start by agreeing which joints are on the list, from the snagging sheet or plot schedule.
- The old bead comes out in full, with no layer left behind.
- Surfaces are cleaned of building dust and primed where needed.
- A sealant chosen for each area goes in and is tooled smooth.
- Finally, each room is checked and you are given the cure time.
Before we arrive
- Clear items away from the joints we are working on
- Keep children and pets away from the work area
- Try not to wet indoor joints just before the visit
Get a quote
To get a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Related advice
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so tell us about it when you ask for a quote.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.