Perth and Kinross · Scotland
New-build mastic & snagging in Old Struan, Perth and Kinross
Problem with your new-build sealant joints in Old Struan? We remove the old material, prepare the joints and seal them properly.
- Gaps behind new kitchen upstands
- Beads laid onto grit and dust from the build
- Frame joints opening as the plaster dries
How we handle new build mastic in Old Struan
Building dust is behind a lot of failed new-build sealant. We clean every joint thoroughly and prime where the surface and product need it, so the sealant actually sticks rather than sitting on a layer of grit. Common call-outs are for beads laid onto grit and dust from the build and gaps behind new kitchen upstands, on show homes, plot handovers and kitchens.
Around smaller Scottish places like Old Struan, new homes tend to be single plots or small developments. Each needs its sealant and floor joints finished as carefully as on a big site.
Every job is covered by our 12-month guarantee, wherever you are in Perth and Kinross.
- Where
- Old Struan (PH18)
- Region
- Perth and Kinross
- Cover
- One year on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Landlords, agents and businesses in Old Struan
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Landlords and agents in Old Struan can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
How the visit works
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The job generally takes anything from a few hours to several days, depending on the number of plots. Outdoor work around Old Struan depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- We start by agreeing which joints are on the list, from the snagging sheet or plot schedule.
- Failed or untidy sealant is cut out completely.
- We clean off dust from the build and prime the surfaces where the product needs it.
- New sealant suited to each joint is applied and tooled neatly.
- We check every joint and tell you how long each needs to cure.
Before we arrive
- Tell us about any water getting in
- Mention any parking rules near the property
- Keep pets and children clear of the area while we work
Ask for a quote
We quote each job on its own, so start by telling us what you need. Just email us at info@mrmastic.co.uk with the details.
Advice
What sealant work cannot fix
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Movement caused by a poorly fitted tray or bath
- Leaks from pipes, valves or wastes, which need a plumber
- Your warranty claim itself, which is between you and the builder
Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly.
Joints and surfaces we work on
- Bathrooms & en suites
- Plot handovers
- Show homes
- Windows & doors
- Kitchens
- Skirting & floors
Why act early in Old Struan
Running a new bead over the builder’s sealant might look tidy for a few weeks, but it will not bond to the old layer. Taking it all out and starting again is the only way to get a lasting seal. Around Old Struan, water from a failed joint in an older stone home can soak into timber and plaster.
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Why choose Mr Mastic in Old Struan
- Domestic, commercial and hotel work
- 4.9 on Google from 180+ five-star reviews
- Full insurance on every job
- We agree the colour with you first
See our cost guide and what customers say.
Old Struan: your questions answered
I let a flat near Blair Atholl station. Can you help?
Yes. We work for letting agents and landlords as well as homeowners. You can email us at info@mrmastic.co.uk with the details for a clear quote.
Do you cover smaller places like Old Struan?
Yes, we do. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Will the old sealant be removed?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
Does someone need to be in?
We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.
What should I tell you?
Tell us what needs doing and where. If we need more, we will ask.
What colour sealant will you use?
That depends on what the joint meets: white or clear in most bathrooms, and a colour to suit worktops, frames and floors elsewhere. We agree the colour before any work starts.
How long will you be here?
Most jobs take a few hours for most snagging lists, longer for a run of plots, including preparation and clearing up. Your quote will say how long we expect yours to take.
Can I add another job to the visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Surface by surface
Plot handovers
Developers can send the plot schedule and specification and we will quote. We seal bathrooms, kitchens, frames and floors.
Skirting and floors
As timber and screed dry, skirting and floors shift. Caulk cracks; a flexible sealant moves with it painted or coloured to suit.
DIY sealant or a professional job?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Signs you need new build mastic in Old Struan
Fresh sealant can be knocked or cut by trades finishing off. A bead disturbed before it has cured may never seal properly and it shows once the home is in use.
Signs it’s time to call us include:
- Worktop and upstand sealant coming away
- New-build shower sealant that has already split
- Smeared, uneven beads picked up at snagging
- Plot mastic for developers ahead of handover
In and around Old Struan, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
What your quote should include
- How long the guarantee is
- How the joint is cleaned and prepared
- Whether they seal over old material or remove it
- Whether the sealant suits the joint
New build mastic around Old Struan
Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up.
If you’ve bought a new home near Blair Atholl station, the sealant around baths, showers and frames is worth checking in the first year or two.
Old Struan is about 26 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. For new build mastic in and around Old Struan, please email us at info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover Perth and Kinross, Old Struan included. Our area takes in 107 places across Perth and Kinross. Dundee is on our list too, around 42 miles away.
Postcode districts we cover here for new build mastic: PH18. Nearby, we also carry out new build mastic in Old Blair (4 miles east), Bridge of Tilt (4 miles east), Blair Atholl (4 miles east), Trinafour (5 miles west) and Moulin (9 miles east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Near you in Old Struan
The nearest railway station is Blair Atholl station, roughly 3.9 miles east of the centre. Nearby you’ll also find Clan Donnachaidh Museum (0.9 miles north-east) and Blair Castle (3.7 miles east). Open spaces near Old Struan include Creag Odhar and Loch Bhac.