Kent · England
New-build mastic & snagging in Egerton, Kent
Plot mastic for developers and snagging failed sealant in new homes for householders, landlords and businesses in Egerton. Fully insured, ARBOMaster approved and guaranteed for a year.
- Gaps behind new kitchen upstands
- Leaking shower tray seals in a new home
- Second-fix sealing on new plots
When to call us in Egerton
On many sites, sealant goes on in the final rush before handover. Joints aren’t always cleaned of dust or primed, and the sealant sits on grit instead of the surface.
People usually contact us after spotting something like this:
- Internal frame sealant that has split
- Gaps opening as the house dries out and settles
- Untidy sealant flagged on a snagging list
- Sealant applied over dusty or wet surfaces
Around Egerton, as everywhere, new build mastic is only as good as the preparation behind it.
Comparing quotes
- Is VAT in the price?
- How the joint is cleaned and prepared
- Who turns up on the day
- Whether they seal over old material or remove it
New build mastic in Egerton
Some new-home owners let the house settle before resealing. That makes sense for small gaps that are just cosmetic, but a seal that is letting water through needs doing now. We work on kitchens, windows & doors and skirting & floors, and common reasons people get in touch are plot mastic for developers ahead of handover and gaps between new skirting and floors.
Somewhere as small as Egerton, new homes tend to be conversions, self-builds or a few houses rather than an estate. Every one needs its sealant and floor joints done properly, whatever the size of the site.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- Egerton (TN27)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before work begins
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
More services for Egerton
How the job changes by surface
Windows and doors
A draught at a new window can be a missed or failed joint. We look at the joints and reseal where needed.
Plot handovers
Plot mastic is carried out to the developer’s schedule. Joints are prepared properly before sealing to keep callbacks down.
New homes and floors in Egerton
The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you’ve bought a new home near Pluckley station, the sealant around baths, showers and frames is worth checking in the first year or two.
Egerton is about 7 miles north-west of Ashford, in Kent. From the centre of Egerton to the outskirts, we cover new build mastic for every kind of property, from flats and houses to offices and hotels. Our Kent coverage runs to 922 places, and Egerton is one of them. We also work in Chelmsford, around 39 miles away.
Here we cover the TN27 postcode area for new build mastic. We cover properties on The Street, Stevens Close and New Road. Nearby, we also carry out new build mastic in Mundy Bois (1 mile south), Newland Green (1 mile south-west), Egerton Forstal (1 mile south-west), Pembles Cross (1 mile west) and Potter's Forstal (1 mile west). We also work in nearby towns such as Maidstone (10 miles north-west), Ashford (7 miles south-east), Sittingbourne (10 miles north), Faversham (11 miles north-east), Kings Hill (15 miles west) and Davington (11 miles north-east).
Around Egerton
The closest station to Egerton is Pluckley station, about 2.7 miles south. Nearby you’ll also find Coldbridge Castle (1.5 miles west).
When it isn’t the sealant
It helps to know what we can’t do too:
- Leaks from pipes, valves or wastes, which need a plumber
- Deciding who is responsible under a builder’s warranty
- Cracking that points to a structural problem
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
Where we work in Egerton
- Show homes
- Skirting & floors
- Windows & doors
- Plot handovers
- Kitchens
- Bathrooms & en suites
Egerton questions
Do you work for landlords with property near Pluckley station?
Yes, landlords and agents are among the people we work for. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
Is Egerton within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can I add another job to the visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
Will you just run a new bead over the existing one?
No. The old sealant is cut out fully, then clean and prime the joint, and a new bead applied.
Do I need to be at home?
If the work is inside, we need someone to let us in. Once we have agreed the job, you don’t need to watch us work.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
How much does new build mastic cost in Egerton?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
What should I tell you?
Just the basics: where it is, what you’ve noticed and how we reach it. After that, simply ring 0345 464 0079 or send us an email.
Why act early in Egerton
Running a new bead over the builder’s sealant might look tidy for a few weeks, but it can’t bond to what’s underneath. A lasting seal starts with removing the old one completely. Older cottages and farmhouses around Egerton can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
What you get with us
- 180+ five-star Google reviews
- Every job guaranteed for a year
- ARBOMaster approved applicator
- Trusted Arbo and Everbuild sealants
Read what affects the cost or customer reviews.
How it works
A visit follows a simple pattern: we look at the joints together, protect the area around them, do the work and tidy away. Most jobs take a few hours for most snagging lists, longer for a run of plots. Somewhere like Egerton needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- Each joint is checked for movement before work begins.
- We remove the failed sealant and clean the joints.
- We make sure the joints are dry and prime them if needed.
- Baths are filled with water, then the new sealant is applied.
- We check every joint and leave you with the cure times.
How to prepare
- Where the joints are inside, avoid wetting them before we arrive
- Mention any leaks or damp you’ve noticed
- Clear the area around the work
How to get a quote
Asking for a quote is easy: tell us what needs doing and where and its rough size. Photos by email help us understand the job.
Read more
For landlords and businesses
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Hotels need rooms back in use, so the work can be planned room by room. We have worked in hotels as well as homes and businesses.
How to look after the new joints
Joint life depends on how it’s used and looked after. We suggest:
- Use the extractor fan every time you shower
- Raise failed sealant with the developer while you’re covered
- Do not wait for the house to settle if water is getting through
- Record problems with dated photos
Do not stand on the bath edge or the lip of the tray in the first few weeks. If a bath or tray moves when you stand in it, get it looked at.
A failed seal in a new home lets water into joists, plasterboard and ceilings. Catching it early keeps the fix to the sealant and protects the rest of the house.