Kent · England

Chambers' Green New Build Mastic

New build mastic across Chambers' Green and nearby, with every bit of old sealant taken out first.

  • Plot mastic for developers ahead of handover
  • Messy sealant that spoils new finishes
  • Gaps behind new kitchen upstands

Book new build mastic in Chambers' Green

About our new build mastic in Chambers' Green

For builders and developers, we work through plots to the schedule you give us. We seal bathrooms, kitchens, windows, doors and skirting so plots are ready to hand over. We work on skirting & floors, kitchens and bathrooms & en suites, and common reasons people get in touch are cracked sealant around new window and door frames and beads laid onto grit and dust from the build.

Around Chambers' Green, older homes often have timber floors that move through the year, which is why skirting and threshold joints need a flexible sealant, not filler.

All of our work is guaranteed for twelve months.

Location
Chambers' Green (TN27)
Wider area
Kent
Cover
A year, on every job
Quote
A clear quote up front
Telephone
0345 464 0079
Updated
26 October 2026
Sealant gun close-up on a shower enclosure wall joint

What happens on the day

All our tools and materials come with us in the van, so you do not need to buy or prepare anything. Once we’ve agreed what’s being done, we protect the area and start. It normally takes anything from a few hours to several days, depending on the number of plots. In a small place like Chambers' Green, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. We start by agreeing which joints are on the list, from the snagging sheet or plot schedule.
  2. The old bead comes out in full, with no layer left behind.
  3. Each joint is cleaned of dust and grit, then primed if required.
  4. New sealant suited to each joint is applied and tooled neatly.
  5. Finally, each room is checked and you are given the cure time.

Getting ready for the visit

  • Tell us about any water getting in
  • Mention if the joints have been sealed before
  • Move anything stored near the joints

Ask for a quote

It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, ring 0345 464 0079 or drop us an email.

Get a quick quote

Advice

DIY versus a professional finish

If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.

What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.

Keeping the joints in good condition

To keep the joints looking good and working properly:

  • Check bath and shower seals every few months as the house settles
  • Clean sealant with mild detergent, not abrasives
  • Keep water off fresh sealant until it has cured
  • Resist patching a failed seal with a tube from the DIY shop

Do not stand on the bath edge or the lip of the tray. Report any movement in a bath or tray.

A failed seal in a new home lets water into joists, plasterboard and ceilings. Early resealing keeps the job small and protects the rest of the house.

What affects the quote in Chambers' Green

Jobs vary more than people expect. The main factors:

  • How many rooms, windows or areas are involved
  • Any working-time requirements on site
  • The type of sealant required
  • Mould in or behind the old joints

Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.

Asking for a quote

Before you ask for a quote, have a think about:

  • If it’s domestic, commercial or a hotel
  • If someone has resealed it before
  • The rough size of the job
  • What’s wrong with the joints now

If you’re in Chambers' Green and need new build mastic, call 0345 464 0079 or send us an email. Tell us what the problem is and where, and we will agree the price before any work begins.

New build mastic around Chambers' Green

The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

Around Chambers' Green, as everywhere, new build mastic is only as good as the preparation behind it.

Chambers' Green is about 5 miles west of Ashford, in Kent. Jobs in Chambers' Green get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Chambers' Green is one of 922 towns and villages in Kent where we work for new build mastic. You can also see our page for Crawley, roughly 41 miles from Chambers' Green.

Here we cover the TN27 postcode area for new build mastic. If you need new build mastic at a property on Station Road and Otium Lake or anywhere close by, our applicators can take on the job. Neighbouring places we cover for new build mastic include Fir Toll (1 mile north), Pluckley Thorne (1 mile north), Pluckley (1 mile north), Maltman's Hill (1 mile west) and Wissenden (2 miles south-west). Further out, we also cover Maidstone (12 miles north-west), Ashford (5 miles east), Sittingbourne (13 miles north), Faversham (12 miles north-east), Davington (13 miles north-east) and Foley Park (13 miles north-west).

What’s near Chambers' Green

In Chambers' Green, that means homes and buildings near The Dering Arms Inn, among other places. There’s a railway station in Chambers' Green itself: Pluckley station. Other landmarks nearby include Romden Castle (1.8 miles south-west).

Map of Chambers' Green © OpenStreetMap contributors

What the job involves on each surface

Skirting and floors

Floors and skirting move as the house dries and the heating runs. We use a flexible product rather than caulk in a colour to suit.

Bathrooms and en suites

Shower trays in new homes often move slightly in the first year. We reseal once the old bead is fully out and baths are filled before sealing.

Common problems we fix in Chambers' Green

Fresh sealant can be knocked or cut by trades finishing off. A bead disturbed before it has cured may never seal properly.

Most people get in touch after spotting something like this:

  • Joints pulling apart as timber shrinks
  • Gaps behind new kitchen upstands
  • Untidy sealant flagged on a snagging list
  • Beads laid onto grit and dust from the build

If you’ve bought a new home near Pluckley station, the sealant around baths, showers and frames is worth checking in the first year or two.

Comparing quotes

  • How the colour is chosen
  • When the joint can take water or movement
  • What the quote includes, VAT included or not
  • Who turns up on the day

10 questions to ask before you book

Common questions in Chambers' Green

Can you help a landlord with a rental near Pluckley station?

Yes, we work for landlords and agents. You can call 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before any work starts.

Is Chambers' Green within the area you cover?

Yes. Chambers' Green is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Where do you work from?

Mr Mastic is based in Crawley. We cover Chambers' Green and the rest of Kent, along with the rest of our area.

What does new build mastic cost?

We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.

Can I send you my snagging list?

Yes. Send it with pictures and we’ll quote for the sealant items. Items that need a plumber, tiler or the builder are flagged.

Do you work for developers?

Yes. We seal plots to the developer’s programme, room by room. Tell us the plots and the joints involved for a clear quote.

Do you remove the old sealant?

Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.

What sealant do you use?

We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we will explain our choice.

Why deal with it now?

DIY kits don’t solve the main problems with new-build sealant: dust, no primer and old sealant left in the joint. Proper removal and preparation are what make it last. In a small place like Chambers' Green, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.

Leaving a failed joint normally makes the job bigger, not smaller, because water and mould keep working on it. If you’re not sure whether it needs doing, phone 0345 464 0079 or send us an email for an honest opinion and a quote.

Why book with us

  • Experience in homes, commercial sites and hotels
  • Full insurance on every job
  • Neat joints and a tidy finish
  • Anti-fungal silicone where joints get wet

See what affects the cost and what customers say.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job