Portsmouth · England
Gutter Sealing in Tipner
Professional gutter sealing in and around Tipner, with old sealant always removed completely and a 12-month guarantee.
- Damp patches inside below a leaking gutter
- Old gutter sealant that has let go
- Garage door frames letting rain in
About our gutter sealing in Tipner
A drip at a gutter joint is easy to ignore, but each shower sends water to the same place. Resealing it is a small job while the gutter is still sound. If you have old gutter sealant that has let go and internal damp traced to a gutter joint, we can put it right.
Homes around Tipner range from older cottages to newer houses, with walls and rooflines of every type. Older homes need their gutter and trim joints kept tight, newer ones their movement joints.
All of our work is guaranteed for twelve months.
- Location
- Tipner (PO2)
- Wider area
- Portsmouth
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Should I try it myself first?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Leave it or put it right?
A dripping stop end can soak the wall right through the wet months. Resealing it is a quick job compared with treating damp later. Homes in smaller places like Tipner can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
The cost reflects the work involved, not guesswork. That is why we ask a few questions first and give you a clear quote before work begins.
What you get with us
- More than 20 years in sealant work
- A 12-month guarantee on all work
- Old sealant always removed completely
- We are fully insured
Read how sealant jobs are priced and customer reviews.
Tipner: your questions answered
Can you help a landlord with a rental near Portsmouth & Southsea station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before work begins.
Will you come out to Tipner?
Yes, Tipner is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
What guarantee comes with the job?
You get our one-year guarantee to all our work.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
Do you remove the old sealant?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Does someone need to be in?
Access is agreed with you when the job is booked. Indoors, that usually means someone at home.
How long will you be here?
A typical job takes an hour or two for a few joints, longer for a full run, including the preparation. Your quote will say how long we expect yours to take.
What information do you need?
Just the basics: where it is, what you’ve noticed and how we reach it. Then call 0345 464 0079 or send us an email.
Keeping the joints in good condition
After the cure time, these simple habits help:
- Keep ladders off the guttering
- Glance at the soffit joints now and then
- Get leaks sealed before the wet months
- Get a dropping gutter looked at quickly
While checking gutters, glance at the fascia joints too. Splits are easier to seal early.
A leaking garage frame lets water reach stored items. A reseal sorts it.
For landlords and businesses
We also work for property managers and facilities teams. Several sites can go on one quote.
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Walls and rooflines in Tipner
Tipner is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on gutter, fascia and roofline joints, especially on the side facing the sea. The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
For site and facilities teams at buildings such as Stamshaw Infant Academy, its movement joints, gutters and trims need looking after like any other building’s. If you let a flat or house near Portsmouth & Southsea station, a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking. For an older house near a landmark such as St Saviour's Church, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Tipner is about 1 mile north-west of Portsmouth, in Portsmouth. Jobs in Tipner get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Across Portsmouth, we cover 19 places, and Tipner is one of them.
Work in PO2 works the same way as everywhere else we cover. Whether your property is on Knox Road, Croft Road and Whaley Road or anywhere close by, our applicators can take on the job. You’ll find Tipner on the M275 and A2047, so it’s easy for us to get to. If you’re just outside Tipner, we cover North End (1 mile east), Rudmore (1 mile south-east), Portsmouth (1 mile south-east), Landport (1 mile south) and Hilsea (1 mile north-east).
What’s near Tipner
In Tipner, that means homes and buildings near St Edmund's Catholic School, Mother Shipton pub and Mayfield School. For rail, the closest station is Portsmouth & Southsea station, roughly 1.4 miles south. A little further out are Charles Dickens Birthplace Museum (0.8 miles south) and Portchester Castle (1.8 miles north-west). Open spaces near Tipner include Milton Locks and Portsdown Hill.
Different surfaces, different methods
Garage door frames
Frame-to-brick joints face the weather. We use a sealant made for outdoor joints.
Gutter end caps
A leaking end cap sends water straight down the wall. It’s a small job to fix.
The process
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes an hour or two for a few joints, longer for a full run, and the area is left clean. Parking around Tipner is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- First, we find the drip and check the gutter is not cracked or sagging.
- The joint or trim is cleaned out and old sealant removed.
- We make sure the joint is dry before sealing.
- Gutter or exterior sealant is applied and finished.
- We check the run and clear any debris we find while we’re there.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Where the joints are inside, avoid wetting them before we arrive
- Plan for the work area to be out of bounds to pets and children
Ask for a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Related advice
What affects the quote in Tipner
The quote reflects the job in front of us. We look at:
- The number of rooms or windows
- How easy the joints are to reach
- Mould in or behind the old joints
- The size of the job
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Asking for a quote
When you contact us, these details help:
- The rough size of the job
- What the problem is, such as mould, gaps, leaks or cracking
- Any previous sealing or DIY work
- The address or postcode of the job
We quote each job on its own, so the first step is telling us about yours. Simply phone 0345 464 0079 or email us and describe the job.