Kent · England
Gutter Sealing in Hawkhurst
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for Hawkhurst, backed by a one-year guarantee. Ask us for a quote.
- Damp on an inside wall under a dripping gutter
- Fascia boards with gaps between them
- Old gutter sealant that has let go
About our gutter sealing in Hawkhurst
A lot of gutter leaks come down to one tired joint. We clean out the joint, dry it and reseal it with a sealant made for guttering. If the gutter is broken or sagging, we’ll tell you. If you are dealing with garage door frames letting rain in and fascia boards with gaps between them, we can help, on uPVC fascias, soffit joints and gutter end caps alike.
Around Hawkhurst, garages, outbuildings and extensions all add to the joints on the outside of a home. Leaks usually start at a gutter end, a garage door frame or where an extension meets the house.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we’ll put it right.
- Place
- Hawkhurst (TN18)
- Region
- Kent
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
How we quote for gutter sealing
For a quick quote, just ask. What matters most is:
- Whether the work is at height
- Mould in or behind the old joints
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
Doing several joints on one visit is generally more efficient than separate visits. We will send you a clear quote for the lot.
What we need to know
Photos by email are helpful but not essential. Try to tell us:
- Access, such as stairs, a lift or height
- Whether it’s a home or a business
- The problem you’ve noticed
- Where the property is
There’s no standard price list. Instead, we give you a clear price for your job. To get started, call 0345 464 0079 or email us.
Also near Hawkhurst
Also in Hawkhurst
What gutter sealing looks like in Hawkhurst
Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. Historic houses like Great Dixter (about 5 miles south-east) are a reminder that the area around Hawkhurst has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth.
For site and facilities teams at buildings such as Hawkhurst Church of England Primary School, its movement joints, gutters and trims need looking after like any other building’s. Homes close to Church of All Saints include some older properties, and an extension built onto an older house moves differently, and the joint between them takes the strain. For landlords with property near Etchingham station, leaking gutter joints on a rental are best caught before they stain the walls.
Hawkhurst is about 12 miles south-east of Royal Tunbridge Wells, in Kent. We provide gutter sealing to homes and businesses in Hawkhurst and the surrounding area. Hawkhurst is one of 922 places in Kent we cover for gutter sealing. For nearby work, see our Crawley page.
We cover every part of the TN18 postcode area for gutter sealing and the streets around it. Local streets include High Street, Barretts Road and Norris Close, and we cover them all. We also cover the places around Hawkhurst: Beal's Green (1 mile north), Pipsden (1 mile east), The Moor (1 mile south-west), Gill's Green (1 mile north) and Little Conghurst (1 mile south-east). Within a short drive, we also cover Maidstone (15 miles north), Royal Tunbridge Wells (12 miles north-west), Tonbridge (14 miles north-west), Paddock Wood (10 miles north-west), Tenterden (8 miles east) and Southborough (13 miles north-west).
Near you in Hawkhurst
Typical jobs here are in homes near Collingwood Nature Reserve, The Queen's Hotel and Marlborough House School. The nearest railway station is Etchingham station, about 4 miles south-west of the centre. Well-known places in the area include Ticehurst House Hospital (4.9 miles west).
Landlords, agents and businesses in Hawkhurst
We work for letting agents and landlords as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
The process
All our tools and materials come with us in the van. Once we’ve agreed what’s being done, we protect the area and start. It normally takes a few hours, depending on the number of joints and the access. For a job in Hawkhurst, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We find where the water is coming from and check the gutter is sound.
- We remove the old sealant and clean the joint.
- The joint is dried before sealing.
- We seal the joint with a sealant made for gutters.
- The gutter is checked and debris around the joints cleared.
Getting ready for the visit
- Mention any tricky access
- For business premises, tell us about site rules or sign-in
- Move anything stored near the joints
How to get a quote
To get a quote, phone 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We will send you a clear quote before any work starts.
Read more
Keeping the joints in good condition
A little care helps the new joints last. We recommend:
- Keep downpipes clear
- Do not lean ladders against the gutter itself
- Keep an eye out for wet patches below a joint
- Deal with a drip before winter
Look at fascia and trim joints when you are checking the gutters. A small split is quicker to put right.
If an end cap is dripping, deal with it before winter. A winter of drips can lead to damp patches inside.
What the job involves on each surface
Gutter end caps
A leaking end cap sends water straight down the wall. It’s a quick reseal.
Soffit joints
Soffits sit under the eaves, where joints can open up. They’re sealed to tidy the line.
Questions from Hawkhurst
Is Hawkhurst within the area you cover?
Yes. Hawkhurst is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Etchingham station. Can you help?
Yes, we work for letting agents and landlords. You can call 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before work begins.
What do you need from me for a quote?
Only a few details: the address or postcode, what’s wrong and any access issues. After that, simply call 0345 464 0079 or email us.
Can you do several jobs on one visit?
Yes. Just list everything you need and we will quote it together.
Is there any odour?
That depends on the sealant. Some smell for a while, some hardly at all, and any smell fades as they cure.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status.
What about gutters on a second or third storey?
Single-storey work is the most straightforward. For anything higher, we’ll confirm what access is needed once we know more.
Do you seal gaps in fascias and soffits?
Yes. We seal open joints along fascias and soffits in a colour to suit.
Why it’s worth doing now in Hawkhurst
You don’t need new fascias just because the joints have opened. Sealing the joints tidies them up if the boards are sound. Homes in smaller places like Hawkhurst can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or drop us an email and we will talk you through it.
Why Hawkhurst customers choose us
- A choice of colours where the product allows
- 4.9 on Google from 180+ five-star reviews
- 20+ years of sealant experience
- Fully insured
Take a look at our cost guide or customer reviews.
Should I try it myself first?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
If you’ve already had a go yourself, that’s fine. We cut it out and start again.