Kent · England

Platt Glazing Silicone

Glazing silicone for conservatories, rooflights, glass panels and shower screens for homeowners, landlords and businesses in Platt. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Drips on the inside of a conservatory window
  • Split or lifting silicone on glass
  • Glass-to-glass joints that have split

Glazing silicone for Platt homes and businesses

Work for landlords, hotels and businesses

For anyone letting property in or around Platt, several properties can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.

Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.

Glazing silicone in Platt, done properly

We renew glazing silicone on conservatories, rooflights and glass panels, as well as frameless shower screens and glass balustrade bases. The old sealant comes out, the joint is cleaned and new silicone goes in. If you are dealing with sealant that was laid over old silicone and failed and water tracking down the inner face of the glass, we can help, on glass-to-glass joints, glass balustrade bases and shower screens alike.

In a village or hamlet like Platt, older cottages and farmhouses often have timber windows set in stone or brick. Not every older frame suits a modern silicone bead, and sometimes a traditional sand mastic is the better choice.

Whatever the size of the job, you get the same 12-month guarantee.

Sealant gun close-up on a shower enclosure wall joint
Location
Platt (TN15)
Region
Kent
Cover
12 months on all our work
Quote
A clear price before any work starts
Phone
0345 464 0079
Page updated
26 October 2026

How the visit works

Once we are on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes a few hours, depending on how many joints need doing. For a village or hamlet like Platt, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. First we agree the joints to be done.
  2. We cut away the failed silicone.
  3. The surfaces are cleaned with a suitable solvent.
  4. New glazing silicone goes in and is finished neatly.
  5. We inspect the work and test it where we can.

Preparing for the visit

  • Tell us about access, such as stairs, a lift or high-level joints
  • Mention if the joints have been sealed before
  • Mention any leaks or damp you’ve noticed

How to get a quote

For a quote, ring 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.

Get a price

Read more

Platt questions

Do you work for landlords with property near Borough Green & Wrotham station?

Yes. We work for landlords and agents as well as homeowners. You can ring 0345 464 0079 or email us with the details for a clear quote.

Will you come out to Platt?

Yes, Platt is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Can you just put new silicone over the old?

Silicone does not stick to silicone and water gets between the layers. We cut out the old sealant first.

Is a special sealant needed for glass?

A glazing silicone chosen for the joint. Neutral-cure products suit most glass and frames, as some acetoxy types can attack certain metals.

Will resealing stop my conservatory leaking?

In many cases, as long as sealant is the cause. We find where the water gets in first before any sealing.

Do I have to be there?

We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.

What do you put in the joint?

Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We will tell you what we are using and why.

How long should I leave it?

That depends on the sealant used, so follow the cure time we give you when we finish.

How to look after the new joints

No joint lasts for ever, but care makes a real difference. Our tips:

  • Squeegee the shower screen after each use
  • Get a new leak looked at quickly
  • Clear the conservatory gutters regularly
  • Open vents or windows to let moisture out

Keep conservatory gutters clear, so water drains away from the joints. Overflowing gutters can cause leaks of their own.

Damp patches, drips and condensation along a joint are worth checking. The cause may be sealant or another part, and we will tell you which.

Should I try it myself first?

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.

If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.

Why act early in Platt

Fixing a leaking screen early protects what’s underneath. A small leak can reach the floor below before it shows. Older cottages and farmhouses around Platt can have timber floors and frames, where water from a failed joint can cause rot if it’s left.

No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we will explain the quote if you ask.

Why Platt clients choose us

  • Anti-fungal silicone where joints get wet
  • ARBOMaster approved applicator
  • Fully insured
  • A 12-month guarantee on all work

See what affects the cost or our reviews.

Surface by surface

Glass-to-glass joints

These joints are on show, so we take care to leave a neat bead.

Rooflights

Rooflights get the full force of the weather. Its sealant ages faster than vertical joints.

What glazing silicone looks like in Platt

With historic houses such as Old Soar Manor (about 1.9 miles south) nearby, there’s older building stock in the area around Platt as well as newer homes. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic. The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

Homes close to Church of St Mary include some older properties, and the windows may be timber, sash or later replacements, and each needs the right sealant against the wall. Rented homes near Borough Green & Wrotham station change hands often, and glazing joints are worth checking at the end of a tenancy, before a small leak grows.

Platt is about 6 miles east of Sevenoaks, in Kent. Jobs in Platt get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Across Kent, we cover 922 places, and Platt is one of them. London is on our list too, about 23 miles from Platt.

Postcode districts we cover here for glazing silicone: TN15. If you need glazing silicone at a property on St Mary's Close, Grange Road and Platt Common or anywhere close by, we can help. Close by, we work in Comp (1 mile south-east), Borough Green (1 mile west), Crouch (1 mile south-west), Wrotham Heath (1 mile north-east) and Basted (1 mile south-west). Further out, we also cover Maidstone (9 miles east), Dartford (12 miles north-west), Sevenoaks (6 miles west), Royal Tunbridge Wells (11 miles south), Gravesend (10 miles north) and Tonbridge (7 miles south).

What’s near Platt

Locally, jobs take us to homes and businesses close to Wrotham School, The Blue Anchor pub and Wrotham School, among other places. For rail, the closest station is Borough Green & Wrotham station, about 0.9 miles west of the centre. Well-known places in the area include Ightham Court (1.8 miles west) and Beechin Wood Archery Museum (less than half a mile south-east).

Map of Platt © OpenStreetMap contributors

When to call us in Platt

Using a sealant not made for glass causes many failures. Not every silicone sticks properly to glass and vinegar-smelling acetoxy silicone can attack some metals.

Signs it’s time to call us include:

  • Stained, discoloured glazing silicone
  • Sealant that was laid over old silicone and failed
  • Cracked silicone between glass panels
  • Water escaping where a screen meets the wall

Managing a site like Platt Church of England Voluntary Aided Primary School? Then its window and door frames need their mastic kept sound, just like a home’s.

What your quote should include

  • What preparation is included
  • Whether they seal over old material or remove it
  • How much experience the applicator has
  • The length of the guarantee

10 questions to ask before you book

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job