Kent · England

Glazing Silicone in Palm Bay

Professional glazing silicone in and around Palm Bay, with old sealant always removed completely and a 12-month guarantee.

  • Stained, discoloured glazing silicone
  • Failed joints on frameless glass
  • Sealant that was laid over old silicone and failed

Book glazing silicone in Palm Bay

What we can’t put right

We won’t take on work that won’t last, so these are the limits:

  • Condensation trapped between two panes
  • Water coming through the roof rather than a sealant joint
  • A sagging or failing conservatory roof

Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly before booking.

Joints and surfaces we work on

  • Glass-to-glass joints
  • Shower screens
  • Glass-to-frame joints
  • Rooflights
  • Conservatory frames
  • Glass balustrade bases

Glazing silicone in Palm Bay, done properly

Cracked, stained or lifting silicone on glass looks poor and can leak. It comes off cleanly, without marking the glass before the new bead goes in. We work on glass-to-glass joints, conservatory frames and shower screens, and people most often call us about failed sealant around rooflight glass and cracked silicone between glass panels.

Somewhere as small as Palm Bay, older homes often have timber frames set in stone or brickwork. Older buildings like these don’t always suit modern silicone, so the sealant has to be chosen to suit the building.

A 12-month guarantee comes as standard, so you are covered after we have gone.

Where
Palm Bay (CT9)
Wider area
Kent
Guarantee
One year on every job
Price
Quoted before any work starts
Phone
0345 464 0079
Last updated
26 October 2026
Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter

Frames and glazing around Palm Bay

Palm Bay is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on glazing joints and frame seals, especially on the side facing the sea. With historic houses such as Quex Park (about 4.3 miles south-west) nearby, there’s older building stock in the area around Palm Bay as well as newer homes. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic.

For an older house near a landmark such as St Philip, frames set in older brick or stone need a sealant that suits the wall as well as the frame. If you let a flat or house near Margate station, leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.

Palm Bay is about 1 mile north-east of Margate, in Kent. For glazing silicone in and around Palm Bay, it’s easy to get a quote: please call 0345 464 0079 or send us an email. We are based in Crawley and cover Kent. Our area takes in 922 places across Kent, from the larger towns to small villages. You can also see our page for Chelmsford, about 46 miles away.

Postcode districts we cover here for glazing silicone: CT9. Local streets include Omer Avenue, Fifth Avenue and Simon Avenue, and we cover them all. We also cover the places around Palm Bay: Cliftonville (1 mile south-west), Northdown (1 mile south-east), Kingsgate (1 mile south-east), St Peter's (2 miles south) and Broadstairs (2 miles south). Larger places within reach include Ramsgate (4 miles south), Deal (12 miles south), Herne Bay (12 miles west), Walmer (13 miles south), St Lawrence (4 miles south) and Newington (3 miles south).

Local landmarks in Palm Bay

Around Palm Bay, our work takes us to homes and buildings near Hartsdown Academy, among other places. Palm Bay’s nearest station is Margate station, roughly 1.8 miles west of the centre. A little further out are Westwood Cross (2.5 miles south) and Public Library & Museum (Camborne) (1.1 miles west).

Map of Palm Bay © OpenStreetMap contributors

Can I do it myself?

Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.

The process

Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes a few hours, depending on how many joints need doing, depending on how much there is to do. Somewhere like Palm Bay needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. First, we check where the water gets in.
  2. The failed silicone is cut out without marking the glass or frame.
  3. We clean the glass and frame so the new silicone bonds.
  4. A neutral-cure glazing silicone is applied and tooled.
  5. Each joint is checked and, where possible, water-tested.

Before we arrive

  • Where the joints are inside, avoid wetting them before we arrive
  • Keep children and pets away from the work area
  • Tell us about access, such as stairs, a lift or high-level joints

Ask for a quote

Getting a quote is simple: tell us what needs doing and where and its rough size. A few photos by email make the job easier to understand, and we will come back to you with a quote.

Get a price

Read more

Landlords, agents and businesses in Palm Bay

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.

We work for landlords and agents as well as homeowners. Sealant work between tenants keeps a property looking cared for.

Palm Bay: your questions answered

Does living near the coast affect glazing silicone in Palm Bay?

Coastal homes put outside sealant through more weather than inland ones, so the choice of sealant and the preparation matter even more. Walls facing the sea are usually the first to need attention.

Do you work for landlords with property near Margate station?

Yes, we work for landlords and agents. Just call 0345 464 0079 or email us and tell us about the property, and we will give you a clear quote.

Will the old sealant be removed?

Yes. Sealing over old sealant is the main reason resealing fails early, so we never do it.

When is the sealant fully cured?

Many sealants skin over quickly but take longer to cure fully. We will tell you how long to leave the joint before we leave.

Is it possible to redo the silicone on a shower screen?

Yes. We remove the old sealant and reseal the wall and tray joints.

Is it enough to run a bead over the old sealant?

It does not last. Fresh silicone will not bond to cured silicone so we take it all out and start clean.

Can I do it myself?

You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

What sealant do you use on glazing?

We use a neutral-cure glazing silicone that suits the glass and frame. Shower screens get anti-fungal silicone.

What happens if it’s left?

Replacing windows or a shower screen isn’t needed for a failed joint. If the glass and frame are sound, new silicone is often all it takes. In a small place like Palm Bay, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.

No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part.

Why Palm Bay customers choose us

  • Tidy, careful work
  • Homes, businesses and hotels
  • Sanitary silicone with an anti-fungal additive in wet areas
  • Any old sealant cut out fully, not covered over

Read how sealant jobs are priced and what customers say.

What the job involves on each surface

Rooflights

Rooflight leaks can come from the sealant or the roof. We check which it is.

Conservatory frames

Frame joints face sun and rain all year. A fresh bead seals them again.

Signs you need glazing silicone in Palm Bay

Glass and frames expand and contract with the temperature at different rates. In time, the sealant splits or pulls away.

The problems people generally mention when they call are:

  • Rooflight joints letting water in
  • Glazing silicone that has cracked or come away
  • Cracked silicone between glass panels
  • Water getting into a conservatory at the joints

For site and facilities teams at buildings such as Palm Bay Primary School, its window and door frames need their mastic kept sound, just like a home’s.

Before booking anyone

  • Are they insured?
  • How the colour is chosen
  • The length of the guarantee
  • How hidden problems are handled

Our hiring checklist

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job