Kent · England

Glazing Silicone in Nettlestead

Glazing silicone for Nettlestead, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Leaks from the base of a shower screen
  • Failed sealant around rooflight glass
  • Split or lifting silicone on glass

Need glazing silicone in Nettlestead?

Glazing silicone in Nettlestead

We renew glazing silicone on conservatories, rooflights and glass panels, as well as frameless shower screens and glass balustrade bases. Each joint is cut out, cleaned and resealed. We’re often asked to deal with leaks from the base of a shower screen and a quick top-up bead that didn’t last, on conservatory frames, rooflights and shower screens.

Homes in small places like Nettlestead often stand in the open, with little to shelter their windows from wind and rain. That exposure dries out and cracks the mastic around frames and sills faster.

The work is covered for a year after we finish. If anything is not right with it, ring 0345 464 0079 or send us an email.

Location
Nettlestead (ME18)
Wider area
Kent
Guarantee
A year, on every job
Quotes
A clear price before we start
Phone
0345 464 0079
Page updated
26 October 2026
Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter

Glazing silicone in Nettlestead: local notes

Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. Historic houses like Old Soar Manor (about 4.3 miles west) are a reminder that the area around Nettlestead has older buildings as well as new. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic.

Managing a site like Wateringbury Church of England Primary School? Then its window and door frames need their mastic kept sound, just like a home’s. Homes close to St Mary's Church include some older properties, and the joint between an old wall and a newer frame is generally the first place rain gets in. If you let a flat or house near Wateringbury station, glazing joints are worth checking at the end of a tenancy, before a small leak grows.

Nettlestead is about 5 miles west of Maidstone, in Kent. Across the ME18 area, we cover glazing silicone for homes and businesses. Nettlestead is one of 922 places in Kent where we work for glazing silicone. We also work in London, about 28 miles from Nettlestead.

Every address in ME18 is covered for glazing silicone. Streets in the area include Henrys Close, Glenleigh Road and Orchard Crescent, and we cover them all. Neighbouring places we cover for glazing silicone include Wateringbury (1 mile north-east), Red Hill (1 mile north-east), Teston (1 mile north-east), Nettlestead Green (1 mile south) and West Farleigh (2 miles east). Larger places within reach include Maidstone (5 miles east), Sittingbourne (15 miles north-east), Sevenoaks (10 miles west), Royal Tunbridge Wells (10 miles south-west), Gravesend (13 miles north) and Tonbridge (7 miles south-west).

Landmarks near Nettlestead

Typical jobs here are in homes near The Railway pub and the streets around them. There’s a railway station in Nettlestead itself: Wateringbury station. Other landmarks nearby include Teapot Island (1.9 miles south) and Leybourne Castle (3.8 miles north).

Map of Nettlestead © OpenStreetMap contributors

Landlord and commercial work in Nettlestead

From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.

Letting agents and landlords in Nettlestead can book us as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.

Different surfaces, different methods

Rooflights

Water around a rooflight is not always the sealant. We check which it is.

Glass-to-glass joints

Frameless glass corners and panels are joined with silicone. We reseal with a suitable glazing silicone.

When something else is needed

Some problems need a builder, plumber or other trade rather than us:

  • Glass that needs replacing
  • A roof that has moved or dropped
  • Condensation trapped between two panes

If in doubt, call 0345 464 0079 or email us and we will say what we think.

Surfaces we seal

  • Glass balustrade bases
  • Glass-to-glass joints
  • Shower screens
  • Conservatory frames
  • Glass-to-frame joints
  • Rooflights

What happens on the day

Most of a good job is in the preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours, depending on how many joints need doing. For a village or hamlet like Nettlestead, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. We trace the leak and confirm it’s a sealant joint.
  2. We remove the old sealant carefully.
  3. The joint is cleaned and degreased.
  4. We lay the new bead and tool it smooth.
  5. Each joint is checked and, where possible, water-tested.

Before we arrive

  • Mention any sign-in or site rules at work premises
  • Mention any tricky access
  • Try not to wet indoor joints just before the visit

How to get a quote

For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work before giving you a price.

Get a quick quote

Advice

Should I try it myself first?

The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.

If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.

What affects the quote in Nettlestead

We quote each job individually. These are the things that affect it:

  • The number of rooms or windows
  • Whether the work is at height
  • The number and length of the joints
  • Whether there’s mould to deal with

Combining jobs into one visit is normally more efficient than separate visits. You’ll get one clear quote for the whole job.

Asking for a quote

When you contact us, these details help:

  • The type of property
  • The rough size of the job
  • Whether it has been sealed before
  • A few photos by email, if you can

Need a quote? Please call 0345 464 0079 or email us and tell us about the job. We’ll explain what we’d do and give you a clear price before any work starts.

FAQs for Nettlestead

I let a flat near Wateringbury station. Can you help?

Yes, we work for letting agents and landlords. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.

Is Nettlestead in your area for glazing silicone?

Yes, Nettlestead is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job, and we’ll give you a clear quote.

How long does glazing silicone take?

It depends on the size of the job, but as a guide it takes a few hours for most jobs. We will tell you when we quote.

Which products do you use?

It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.

Can I add another job to the visit?

Yes. Tell us about everything you’d like done and you’ll get one quote.

Do you reseal glass shower screens?

Yes. We cut out the old silicone and reseal the glass-to-wall and glass-to-tray joints.

Should I try DIY first?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.

What information do you need?

Where the job is, what the problem is and roughly how big it is. Photos by email help too.

Keeping the joints in good condition

Once the sealant has cured, a few habits help it last:

  • Keep scrapers and blades away from the silicone
  • Keep air moving in the conservatory
  • Wipe the screen down after showering
  • Get a new leak looked at quickly

Gentle products are best near the sealant. Strong solvents can soften or mark it.

A leaking shower screen may not show at first. Water can soak into the floor or reach the room below before you spot it.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job