Kent · England

Glazing Silicone in Hillborough

Glazing silicone across Hillborough and nearby, with every bit of old sealant taken out first and a 12-month guarantee.

  • Leaks where conservatory glass meets the frame
  • Shower screens leaking along the wall or tray
  • New silicone smeared over old sealant

Glazing silicone near Hillborough

About our glazing silicone in Hillborough

We don’t replace glass and a misted double-glazed unit needs a glazier. What we do is the silicone around the glass, which is where many leaks start. We’re often asked to deal with water tracking down the inner face of the glass and new silicone smeared over old sealant, across rooflights, glass-to-glass joints and glass balustrade bases.

Homes around Hillborough range from older properties to newer houses, and their windows range just as widely. The right sealant depends on the frame and on what it sits in.

Every job comes with a 12-month guarantee, wherever you are in Kent.

Sealant gun close-up on a shower enclosure wall joint
Location
Hillborough (CT6)
Wider area
Kent
Cover
A year, on every job
Quote
A clear price before we start
Phone
0345 464 0079
Updated
26 October 2026

How to look after the new joints

Simple care keeps the joints in good condition. We recommend:

  • Act on drips or damp patches early
  • Run a squeegee over the glass when you’re done
  • Check the gutters above the glazing for debris
  • Look over the glazing joints once a year

Squeegee a shower screen after each shower and let the room air. That slows mould growth on the bead.

Cracked glazing silicone means the joint has failed. Resealing now is a small job compared with fixing water damage later.

Frames and glazing around Hillborough

Hillborough is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on glazing joints and frame seals, especially on the side facing the sea. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

For site and facilities teams at buildings such as Reculver Church of England Primary School, its window and door frames need their mastic kept sound, just like a home’s. Rented homes near Herne Bay station change hands often, and a shower screen or conservatory joint that leaks is easier to reseal while the property is empty.

Hillborough is about 2 miles east of Herne Bay, in Kent. Jobs in Hillborough get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. 922 places in Kent are on our list, from the larger towns to small villages. There’s also a page for Chelmsford, about 39 miles away.

Jobs for glazing silicone in CT6 is quoted and booked the same way as anywhere else. You’ll find streets such as Manor Road, Puffin Road and Neville Road, and we cover them all. Main roads around Hillborough include the A299. Other places close to Hillborough include Hawthorn (1 mile south-east), Bishopstone (1 mile north), Beltinge (1 mile north-west), Broomfield (1 mile south-west) and Highstead (1 mile south). We also work in nearby towns such as Canterbury (7 miles south-west), Margate (9 miles east), Ramsgate (11 miles east), Broadstairs (11 miles east), Whitstable (6 miles west) and Deal (14 miles south-east).

What’s near Hillborough

Locally, jobs take us to homes and businesses close to Bishopstone Cliffs and The Huntsman And Horn Public House, among other places. The nearest railway station is Herne Bay station, roughly 2.2 miles west of the centre. A little further out are Whitstable and Tankerton Hospital (5.2 miles west). Open spaces near Hillborough include West Blean and Thornden Woods.

Map of Hillborough © OpenStreetMap contributors

Why deal with it now?

If the problem is a misted unit or a broken panel, sealant won’t help. We say so plainly and point you to a glazier or roofer. Homes in smaller places like Hillborough can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.

What it costs depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.

Why us?

  • We are fully insured
  • We never seal over old sealant
  • Domestic, commercial and hotel work
  • You choose the colour before work begins

Read how sealant jobs are priced and customer reviews.

Different surfaces, different methods

Shower screens

Frameless screens rely on silicone at the base and wall. We reseal without scratching the glass.

Glass balustrade bases

Outdoor balustrade joints face the weather. A sound sealant joint keeps them tidy and dry.

FAQs for Hillborough

Do you cover smaller places like Hillborough?

Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Do you work for landlords with property near Herne Bay station?

Yes, we work for landlords and letting agents. Just call 0345 464 0079 or email us and tell us about the property, and we’ll send you a clear quote.

Do you remove the old sealant?

Yes. We cut out all the old sealant and clean the joint before applying anything new.

How much does glazing silicone cost in Hillborough?

The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote.

Do you do commercial work?

Yes. Hotels, offices and other businesses use us, and we are fully insured.

Do I have to be there?

Access is agreed with you when the job is booked. Indoors, that usually means someone at home.

Which silicone is used for glass joints?

A neutral-cure glazing silicone that suits the glass and frame. In bathrooms, we use anti-fungal silicone.

Will there be a smell?

There can be a smell while the sealant cures, which fades as it sets. Ventilation helps.

What we do, step by step

Most of a good job is in the preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. In total, it usually takes a few hours, depending on how many joints need doing. In a smaller place like Hillborough, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.

  1. First, we trace the leak and check it’s coming through a sealant joint.
  2. Old silicone is cut away from the glass and frame without scratching either.
  3. We clean the joint with a solvent that suits the glass and frame.
  4. Glazing silicone suited to the joint is applied and tooled.
  5. The finished joints are checked and, where it’s safe, tested with water.

How to prepare

  • Mention if the joints have been sealed before
  • Try not to wet indoor joints just before the visit
  • Let us know if you’ve seen damp or leaks

How to get a quote

For glazing silicone in Hillborough, ring 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.

Get a price

Related advice

DIY sealant or a professional job?

Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.

A DIY attempt does not rule out a professional job. We cut it out and start again, so just mention it when you contact us.

When something else is needed

It helps to know what we cannot do too:

  • Misting between the panes of a double-glazed unit (a failed unit for a glazier)
  • Leaks from the roof covering or flashing (a roofer’s job)
  • A roof that has moved or dropped

If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think before booking.

What we seal

  • Rooflights
  • Glass balustrade bases
  • Glass-to-glass joints
  • Conservatory frames
  • Glass-to-frame joints
  • Shower screens

Signs you need glazing silicone in Hillborough

The wrong sealant is a common cause. Some products do not bond well to glass and vinegar-smelling acetoxy silicone can attack some metals.

The most common problems we see are:

  • Shower screens leaking along the wall or tray
  • Silicone pulling away from the glass
  • Leaks where conservatory glass meets the frame
  • Leaking glazing joints on a rooflight

In the older streets around Church of St Mary the Virgin, frames set in older brick or stone need a sealant that suits the wall as well as the frame.

Before booking anyone

  • What preparation is included
  • What product goes in the joint
  • How hidden problems are handled
  • Whether they’re fully insured

How to choose a mastic man

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job