Essex · England

Hellman's Cross Glazing Silicone

Our applicators work in Hellman's Cross on glazing silicone for conservatories, rooflights, glass panels and shower screens. Old sealant removed completely, joints prepared properly.

  • Glazing silicone that has cracked or come away
  • Stained, discoloured glazing silicone
  • Water getting into a conservatory at the joints

Glazing silicone in Hellman's Cross

When to call us in Hellman's Cross

On shower screens, constant water and cleaning products wear silicone. Mould grows into the bead and the edges begin to peel.

If you can see any of these, it’s time to have the joints looked at:

  • Water getting into a conservatory at the joints
  • Drips on the inside of a conservatory window
  • Black or yellowed silicone on glass joints
  • Rooflight joints letting water in

Rented homes near Stansted Airport station change hands often, and a shower screen or conservatory joint that leaks is easier to reseal while the property is empty.

Questions to ask before booking

  • Whether they seal over old material or remove it
  • How the surfaces are prepared before sealing
  • What guarantee comes with the work
  • Is VAT in the price?

Our hiring checklist

Glazing silicone in Hellman's Cross

Cracked, stained or lifting silicone on glass looks poor and can leak. We remove it without scratching the glass or frame and reseal the joint. If you have water tracking down the inner face of the glass and sealant that was laid over old silicone and failed, we can put it right, whatever the surface.

Outdoor sealant needs dry, clean surfaces, so work on frames around Hellman's Cross is planned for dry weather. Let us know about access to all the frames, upstairs ones included.

All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.

Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter
Where
Hellman's Cross (CM6)
Wider area
Essex
Cover
One year on every job
Quote
Quoted before any work starts
Call
0345 464 0079
Updated
26 October 2026

Looking after it afterwards

Simple care keeps the joints in good condition. We recommend:

  • Avoid strong solvents on or near the sealant
  • Look over the glazing joints once a year
  • Stick to mild cleaners on glass
  • Wipe the screen down after showering

Keep the new joints dry for as long as we advise. After that, clean glass with a mild cleaner.

A leaking shower screen may not show at first. It can damage the floor or the ceiling below long before you see it.

Can I do it myself?

Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.

What we cannot put right

We will not take on work that won’t last, so here’s what sealant can’t put right:

  • A roof that has moved or dropped
  • Rotten or badly damaged frames
  • A sealed unit that has misted inside

If in doubt, phone 0345 464 0079 or send us an email and we will say what we think before booking.

Joints and surfaces we work on

  • Shower screens
  • Glass balustrade bases
  • Rooflights
  • Glass-to-frame joints
  • Conservatory frames
  • Glass-to-glass joints

Frames and glazing around Hellman's Cross

With historic houses such as Barrington Hall (about 1.8 miles south-west) nearby, there’s older building stock in the area around Hellman's Cross as well as newer homes. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic. The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

Historic houses such as Barrington Hall, about 1.8 miles south-west, show how far back building around Hellman's Cross goes.

Hellman's Cross is about 6 miles east of Bishop's Stortford, in Essex. For glazing silicone in and around Hellman's Cross, please call 0345 464 0079 or drop us an email for a quick quote. We cover Essex from our Crawley base, Hellman's Cross included. 644 places in Essex are on our list, from the larger towns to small villages. There’s also a page for Chelmsford, roughly 11 miles from Hellman's Cross.

Every address in CM6 is within our area for glazing silicone. We also cover the places around Hellman's Cross: Puttock's End (1 mile north-west), Hope End Green (1 mile north), Smith's Green (2 miles north), Little Canfield (2 miles north) and Takeley (2 miles north-west). Further out, we also cover Chelmsford (11 miles south-east), Braintree (12 miles east), Harlow (9 miles south-west), Brentwood (15 miles south), Witham (15 miles east) and Saffron Walden (12 miles north).

Local landmarks in Hellman's Cross

Hellman's Cross’s nearest station is Stansted Airport station, roughly 3.1 miles north. A little further out are Little Easton Moat (3.4 miles north-east) and Herts and Essex Hospital (4.9 miles west). The countryside around Hellman's Cross includes Portingbury Hills and Rushy Mead.

Map of Hellman's Cross © OpenStreetMap contributors

Leave it or put it right?

You do not need new glazing because the sealant has gone. If the glass and frame are sound, new silicone is often all it takes, and we’ll tell you if that is not the case. Older cottages and farmhouses around Hellman's Cross can have timber floors and frames, where water from a failed joint can cause rot if it’s left.

No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we’ll explain the quote if you ask.

Why us?

  • White, clear, grey or coloured to suit, where the product allows
  • We never seal over old sealant
  • Trusted Arbo and Everbuild sealants
  • Colour agreed with you before work begins

Take a look at what affects the cost and our reviews.

Work for landlords, hotels and businesses

Housing providers, facilities teams and property managers book us too in Hellman's Cross and across Essex. We can quote a run of properties together, and we’re fully insured.

In hotels, rooms out of use cost money, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.

Common questions in Hellman's Cross

I let a flat near Stansted Airport station. Can you help?

Yes. We work for landlords and letting agents as well as homeowners, and several properties can be quoted together. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.

Will you come out to Hellman's Cross?

Yes, Hellman's Cross is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

How much does glazing silicone cost in Hellman's Cross?

Size, access and the old material all affect the cost. Ask us for a quote and we will talk you through it.

Will it make a mess?

No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.

What do you put in the joint?

Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.

Does someone need to be in?

Access is agreed with you when the job is booked. Indoors, that normally means someone at home.

Do you hold any approvals?

Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.

How long should I leave it?

Different products cure at different speeds, so please follow the time we give you.

What we do, step by step

On the day, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before we start. The work generally takes a few hours, depending on how many joints need doing. Somewhere like Hellman's Cross needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. First we agree the joints to be done.
  2. We cut away the failed silicone.
  3. The surfaces are cleaned with a suitable solvent.
  4. We apply and tool the new silicone.
  5. We inspect the work and test it where we can.

Before we arrive

  • Let us know if you’ve seen damp or leaks
  • Let us know about stairs, lifts or work at height
  • Try not to wet indoor joints just before the visit

Ask for a quote

It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. When it suits you, ring 0345 464 0079 or send us an email.

Get a quick quote

Read more

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job