Medway · England
Glazing & conservatory sealant in Fenn Street, Medway
Problem with your glazing joints in Fenn Street? We cut out the old, prepare the joints and apply the right sealant.
- Mouldy sealant around glass panels
- Split or lifting silicone on glass
- New silicone smeared over old sealant
About our glazing silicone in Fenn Street
Glass replacement is not something we do and a misted double-glazed unit needs a glazier. Our work is the sealant joints and that is often where the water gets in. We work on glass balustrade bases, glass-to-glass joints and conservatory frames, and the jobs we see most are stained, discoloured glazing silicone and a quick top-up bead that didn’t last.
Around Fenn Street, many homes face open ground, so their windows and doors take the full weather. Exposed frames and sills lose their mastic sooner than sheltered ones.
Our work is backed for twelve months, in Fenn Street and everywhere else we cover.
- Location
- Fenn Street (ME3)
- Region
- Medway
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What affects the cost of glazing silicone
Some jobs are bigger than they look, and some smaller. The main factors:
- Whether the work is at height
- How much old sealant there is and how hard it is to remove
- The product the joint needs
- Any mould that needs treating
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Helping us quote
When you call or email, it’s useful to know:
- Photos by email, if that is easy
- If it’s domestic, commercial or a hotel
- The address or postcode of the job
- What’s wrong with the joints now
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, ring 0345 464 0079 or email us.
Work for landlords, hotels and businesses
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
If you manage several properties in or around Fenn Street, several properties can go on one quote. Send us the addresses and the work at each.
Glazing silicone in Fenn Street: local notes
Fenn Street is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
If you look after a building such as High Halstow Primary Academy, its window and door frames need their mastic kept sound, just like a home’s. For an older house near a landmark such as Church of St Mary, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
Fenn Street is about 5 miles north of Gillingham, in Medway. Every kind of property in Fenn Street can book us for glazing silicone. Every job comes with our one-year guarantee. Across Medway, we cover 68 places, Fenn Street among them. Chelmsford is on our list too, around 21 miles away.
Postcode districts we cover here for glazing silicone: ME3. That includes homes and businesses on Winterberry Avenue, Sharnal Street and Parbrook Road. Close by, we work in Sharnal Street (1 mile south-west), High Halstow (1 mile west), Tunbridge Hill (1 mile south-east), St Mary Hoo (1 mile north-east) and Kingsnorth (1 mile south-east). Within a short drive, we also cover Gillingham (5 miles south), Chatham (7 miles south), Rochester (5 miles south-west), Rainham (6 miles south), Strood (6 miles south-west) and Luton (6 miles south).
Near you in Fenn Street
Typical jobs here are in homes near The Hundred of Hoo Academy. The nearest railway station is Gillingham (Kent) station, roughly 4.4 miles south of the centre. Nearby you’ll also find Medway Maritime Hospital (4.9 miles south) and Upnor Castle (3.7 miles south-west). Open spaces near Fenn Street include Bishop Saltings.
When to call us in Fenn Street
Silicone will not bond to a dirty surface. Where the joint wasn’t cleaned and degreased, the bead can peel away early.
Most people get in touch when they notice one of these:
- Water running down inside the glass
- Water escaping where a screen meets the wall
- New silicone smeared over old sealant
- Stained, discoloured glazing silicone
For landlords with property near Gillingham (Kent) station, glazing joints are worth checking at the end of a tenancy, before a small leak grows.
Before booking anyone
- Which sealant they’ll use, and why
- What guarantee comes with the work
- What the quote includes, VAT included or not
- How the surfaces are prepared before sealing
When it isn’t the sealant
It helps to know what we cannot do:
- Misting between the panes of a double-glazed unit (a failed unit for a glazier)
- Glass that needs replacing
- Rotten or badly damaged frames
Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly before you book.
What we seal
- Glass-to-frame joints
- Glass balustrade bases
- Glass-to-glass joints
- Shower screens
- Conservatory frames
- Rooflights
Different surfaces, different methods
Conservatory frames
Frame joints face sun and rain all year. Renewed sealant keeps water out.
Glass-to-frame joints
Glass-to-frame joints need a sealant that bonds to both. We use a glazing silicone suited to each.
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Also near Fenn Street
Also in Fenn Street
What we do, step by step
There is not much for you to do on the day. Point us to the joints and we will get on with it. The work itself takes a few hours, depending on how many joints need doing, including the tidy-up. For a village or hamlet like Fenn Street, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First, we check where the water gets in.
- The failed silicone is cut out without marking the glass or frame.
- We clean the glass and frame so the new silicone bonds.
- A neutral-cure glazing silicone is applied and tooled.
- We check the finished joints and test with water where it’s safe.
Getting ready for the visit
- Move anything stored near the joints
- Let us know about earlier repairs to the joints
- Mention any tricky access
Getting a quote
To get a quote, call 0345 464 0079 or send us an email with the location and a short description of the problem. You will have a clear quote before we start.
Advice
Fenn Street questions
Is glazing silicone in a coastal place like Fenn Street any different?
Coastal weather is harder on outside sealant: there’s more wind-driven rain and, closer to the shore, salt in the air. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.
Will you come out to Fenn Street?
Yes, Fenn Street is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Are you an approved applicator?
Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Can you fix a leaking conservatory?
Often, if the leak is at a sealant joint. We trace the leak first, so you know what you are paying for.
Do you work for letting agents?
Yes. We work in homes, commercial premises and hotels.
Will the old sealant be removed?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Will there be a smell?
That depends on the sealant. Some products have a noticeable smell, others very little.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and we clear up when we’re done.