Moray · Scotland
Drummuir Glazing Silicone
We cover Drummuir for glazing silicone for conservatories, rooflights, glass panels and shower screens. Old sealant removed completely, joints prepared properly.
- Sealant that was laid over old silicone and failed
- Failed joints on frameless glass
- Water escaping where a screen meets the wall
How we handle glazing silicone in Drummuir
Glass, frames and walls all move at different rates, so the sealant between them does a lot of work. Once it splits or comes away, water finds a way through. We replace it with a glazing silicone that suits the glass and frame. Typical jobs include new silicone smeared over old sealant and water escaping where a screen meets the wall, on glass balustrade bases, shower screens and glass-to-frame joints.
In and around a place like Drummuir, homes range from older stone-built cottages to newer houses. Exposed frames and sills take the full force of wind-driven rain, so the mastic there works hard.
Your job is guaranteed for a year, as with all our work.
- Location
- Drummuir (AB55)
- Wider area
- Moray
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Windows and doors in Drummuir
Many older homes in Scotland have sash and case windows, and the joint between the box frame and the stone or render is traditionally pointed with sand mastic. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and sound outside sealant is part of that.
For an older house near a landmark such as Botriphnie Parish Church, frames set in older brick or stone need a sealant that suits the wall as well as the frame.
Drummuir is about 13 miles south of Buckie, in Moray. From the centre of Drummuir to the outskirts, we cover glazing silicone for every kind of property, from flats and houses to offices and hotels. Drummuir is one of 58 towns and villages in Moray we cover. Aberdeen is on our list too, around 41 miles away.
Postcode districts we cover here for glazing silicone: AB55. Being close to the B9014, Drummuir is simple for us to get to. Close by, we work in Keith (5 miles north-east), Dufftown (5 miles south-west), Newmill (6 miles north-east), Craigellachie (6 miles west) and Cairnie (6 miles east). Larger places within reach include Elgin (15 miles north-west), Buckie (13 miles north), Ashgrove (15 miles north-west), Fochabers (9 miles north), Findochty (15 miles north) and Ianstown (14 miles north). For island and remote addresses, a little more planning is needed.
What’s near Drummuir
Nearby you’ll also find Pitlurg Castle (3.2 miles east) and Stephen Cottage Hospital (4.6 miles south-west). The countryside around Drummuir includes Hill of Towie and Loch Park.
What we do, step by step
There is not much for you to do on the day. Point us to the joints and we will get on with it. The work itself takes a few hours, depending on how many joints need doing, including the tidy-up. Outdoor work around Drummuir depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- We look at the glazing and agree which joints need resealing.
- Old sealant is removed from the glass and frame.
- The surfaces are cleaned with a suitable solvent.
- We apply and tool the new silicone.
- The joints are checked before we leave.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any water getting in
- Move anything stored near the joints
Getting a quote
Every job is quoted individually, so start by telling us what you need. Just email us at info@mrmastic.co.uk with the details.
Advice
Questions from Drummuir
What guarantee comes with glazing silicone in Drummuir?
All our work, in Drummuir and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Is Drummuir within the area you cover?
Yes. Drummuir is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
What does glazing silicone cost?
It depends on the job, so we quote each one individually. To get one, email us at info@mrmastic.co.uk and tell us what needs doing and where.
Can tenants book the work?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can a conservatory leak be sealed?
It depends on the cause. Sealant joints we can renew but roof and panel problems need another trade.
Which products do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Is it enough to run a bead over the old sealant?
Silicone does not stick to silicone, so a top-up soon lets water through. We cut out the old sealant first.
Do the sealants smell?
Some sealants have a smell while they cure, but it fades. Opening a window helps.
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Wipe the screen down after showering
- Look over the glazing joints once a year
- Use gentle products around the joints
- Do not use a blade near the sealant
Do not use blades or scrapers near the bead when cleaning the glass. A soft cloth or sponge is best.
Don’t leave lifting or mouldy silicone on glazing. Peeling silicone lets water in behind and the problem grows.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Surface by surface
Glass-to-frame joints
We cut the old silicone from the glass without scratching it before new glazing silicone goes in.
Glass balustrade bases
We reseal the joint where the glass meets the base channel. Glass fitting is a separate trade.
What affects the quote in Drummuir
We quote each job individually. These are the things that affect it:
- How easy the joints are to reach
- The number and length of the joints
- The old material and how stubborn it is
- Working hours on commercial sites
There are no prices on our website, because each job is priced on what it involves. For a quick quote, please drop us a line at info@mrmastic.co.uk.
Helping us quote
When you contact us, these details help:
- The rough size of the job
- Access, such as stairs, a lift or height
- Where the job is, and your postcode
- Photos by email, if that is easy
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved before giving you a price.
For landlords and businesses
In hotels, rooms out of use cost money, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
Do you need glazing silicone in Drummuir?
Heat and cold make glass and frames move, and they don’t move by the same amount. Over years, that movement tears the silicone.
Keep an eye out for any of the following:
- Water running down inside the glass
- Sealant that was laid over old silicone and failed
- Glass-to-glass joints that have split
- Water escaping where a screen meets the wall
Around Drummuir, as everywhere, glazing silicone is only as good as the preparation behind it.
Before booking anyone
- Whether the sealant suits the joint
- Is the old sealant removed completely?
- What happens if they find a problem under the old sealant
- How the joint is cleaned and prepared