Kent · England

Glazing & conservatory sealant in Colliers Green, Kent

Specialist glazing silicone for Colliers Green: careful preparation, the right product and tidy work. Call for a quick quote.

  • Water running down inside the glass
  • Mouldy sealant around glass panels
  • New silicone smeared over old sealant

Glazing silicone for Colliers Green homes and businesses

Glazing silicone in Colliers Green: local notes

With historic houses such as Scotney Castle (about 4.9 miles south-west) nearby, there’s older building stock in the area around Colliers Green as well as newer homes. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

Historic houses such as Scotney Castle, about 4.9 miles south-west, show how far back building around Colliers Green goes. If you look after a building such as Colliers Green Church of England Primary School, the mastic around its windows and doors needs looking after like any other building’s.

Colliers Green is about 7 miles south-east of Paddock Wood, in Kent. Jobs in Colliers Green get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. 922 places in Kent are on our list. You can also see our page for Crawley, about 30 miles away.

Postcode districts we cover here for glazing silicone: TN17. We also cover the places around Colliers Green: Flishinghurst (1 mile south), Horden (1 mile north), Wilsley Green (2 miles south-east), Wilsley Pound (2 miles south-east) and Cranbrook Common (2 miles east). Within a short drive, we also cover Maidstone (10 miles north), Ashford (15 miles east), Royal Tunbridge Wells (11 miles west), Tonbridge (12 miles north-west), Kings Hill (11 miles north-west) and Foley Park (11 miles north).

Landmarks near Colliers Green

Around Colliers Green, our work takes us to homes and buildings near High Weald Academy and The Gill and the streets around them. The closest station to Colliers Green is Marden station, roughly 3.9 miles north. A little further out are Sissinghurst Castle (3 miles east) and Benenden Hospital (5.1 miles south-east).

Map of Colliers Green © OpenStreetMap contributors

How we handle glazing silicone in Colliers Green

Glazing silicone is a maintenance item. Sun, rain and movement wear it down and cracked joints let water in. Resealing puts that right. We’re often asked to deal with mouldy sealant around glass panels and water getting into a conservatory at the joints, on glass-to-glass joints, rooflights and glass balustrade bases.

Around Colliers Green, many homes face open ground, so their windows and doors take the full weather. That exposure dries out and cracks the mastic around frames and sills faster.

The work is covered for a year after we finish. If anything isn’t right with it, phone 0345 464 0079 or send us an email.

Sealant gun close-up on a shower enclosure wall joint
Location
Colliers Green (TN17)
Region
Kent
Cover
A year, on every job
Quote
A clear price before we start
Phone
0345 464 0079
Updated
26 October 2026

Signs you need glazing silicone in Colliers Green

Sunlight breaks sealant down, especially on conservatory roofs. It goes brittle, cracks and stops sticking on the glass.

The most common problems we see are:

  • Cracked silicone between glass panels
  • Stained, discoloured glazing silicone
  • A quick top-up bead that didn’t last
  • Water escaping where a screen meets the wall

For landlords with property near Marden station, a shower screen or conservatory joint that leaks is easier to reseal while the property is empty.

What to look for in a quote

  • Whether they’re fully insured
  • What the quote includes, VAT included or not
  • What happens if they find a problem under the old sealant
  • What guarantee comes with the work

Choosing a sealant specialist

How the visit works

At the end, we look at the finished work together and tell you how long to leave it. The visit itself generally takes a few hours for most jobs, depending on how much there is to do. Somewhere like Colliers Green needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.

  1. We find where water is getting in and check whether it’s a sealant joint.
  2. Old silicone is cut away from the glass and frame without scratching either.
  3. The glass and frame are cleaned and degreased.
  4. Glazing silicone suited to the joint is applied and tooled.
  5. We check the joints and, where safe, run water over them.

How to prepare

  • Move anything stored near the joints
  • Mention any parking rules near the property
  • Tell us about access, such as stairs, a lift or high-level joints

Getting a quote

The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.

Ask for a quote

Read more

Colliers Green: your questions answered

Will you come out to Colliers Green?

Yes, Colliers Green is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Is Colliers Green in your area for glazing silicone?

Yes. We work across London and the South East, and Colliers Green is part of that. Just call 0345 464 0079 or email us with a few details of the job.

Is it worth trying it myself?

Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Which products do you use?

The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.

Do you do commercial work?

Yes. We have worked for hotels, offices and other businesses.

Do you work for landlords and businesses?

Yes, regularly. Several properties can be quoted together, and between tenancies is a good time for the work.

I rent my home. Can I book you?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Is it enough to run a bead over the old sealant?

Topping up is a common cause of leaks. We remove the old silicone, clean the joint and reseal.

What affects the quote in Colliers Green

Jobs vary more than people expect. The main factors:

  • How easy the joints are to reach
  • Mould in or behind the old joints
  • The old material and how stubborn it is
  • The number and length of the joints

Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.

Helping us quote

Photos by email are helpful but not essential. Try to tell us:

  • What the problem is, such as mould, gaps, leaks or cracking
  • Whether it’s a home or a business
  • Where the job is, and your postcode
  • Whether it has been sealed before

For glazing silicone in Colliers Green, phone 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before work begins.

Looking after it afterwards

How long the joints last depends on use and care. Here’s what we suggest:

  • Check the gutters above the glazing for debris
  • Look over the glazing joints once a year
  • Keep harsh solvents off the silicone
  • Do not leave a drip for the next storm

On shower screens, wipe or squeegee after use and let the room air. That slows mould growth on the bead.

Drips or damp near a glazing joint shouldn’t be ignored. The cause may be sealant or another part and we’ll find out which.

DIY versus a professional finish

Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.

If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.

Surface by surface

Glass balustrade bases

The base of a glass balustrade is generally sealed. When it fails, water can sit in the channel.

Glass-to-frame joints

Silicone at the glass edge seals it into the frame. When it splits, water can get into the frame.

When something else is needed

We will not take on work that will not last, so here’s what sealant can’t put right:

  • Frames that have decayed or split
  • Structural problems with a conservatory roof
  • Water coming through the roof rather than a sealant joint

If in doubt, call 0345 464 0079 or email us and we will say what we think.

Where we work in Colliers Green

  • Rooflights
  • Glass balustrade bases
  • Glass-to-frame joints
  • Shower screens
  • Conservatory frames
  • Glass-to-glass joints
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job