Oxfordshire · England
Glazing & conservatory sealant in Broughton, Oxfordshire
Glazing joints in Broughton need attention? We remove the old material, prepare the joints and seal them properly.
- New silicone smeared over old sealant
- Cracked silicone between glass panels
- Leaks where conservatory glass meets the frame
Glazing silicone for homes and businesses in Broughton
Glazing joints need a sealant made for glass. We use a neutral-cure glazing silicone, which suits glass and most frame materials, and we tool it to a neat, even finish. If you have glazing silicone that has cracked or come away and a quick top-up bead that didn’t last, we can help.
Around Broughton, many homes face open ground, so their windows and doors take the full weather. Exposed frames and sills lose their mastic sooner than sheltered ones.
You get a one-year guarantee, the same in Broughton as everywhere else we work.
- Where
- Broughton (OX15)
- Wider area
- Oxfordshire
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
For landlords and businesses
Landlords and letting agents in Broughton can book us as well as householders. Sealant work between tenants keeps a property looking cared for.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we’re fully insured.
Broughton: your questions answered
Do you work for landlords with property near Banbury station?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or email us with the details for a clear quote.
Is Broughton within the area you cover?
Yes, Broughton is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do I need to be at home?
That depends on where the joints are. Inside work needs someone to give us access.
What information do you need?
A short description and the location, with photos by email if possible. We’ll ask anything else we need to know.
How long will you be here?
It depends on the size of the job, but as a guide it takes anything from an hour or two to most of a day, depending on the size of the job. We will give you a better idea when we quote.
Where are you based?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Do you fit new glass or sealed units?
No. We renew the sealant. Glass and sealed units need a glazier.
Will the old sealant be removed?
Yes, always, and completely. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. A few tips:
- Use gentle products around the joints
- Get a new leak looked at quickly
- Inspect the sealant on glazing annually
- Wipe the screen down after showering
Gentle products are best near the sealant. Harsh solvents may damage the bead.
Act on black or lifting silicone early. Once it starts to peel, water gets behind it and the leak gets worse.
How the job changes by surface
Glass balustrade bases
Outdoor balustrade joints face the weather. A sound sealant joint keeps them tidy and dry.
Rooflights
Rooflight glazing joints are cut out and renewed. Leaks from the roof itself need a roofer.
What happens on the day
Most of a good job is in the preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it normally takes anything from an hour or two to most of a day, depending on the size of the job. In a small place like Broughton, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We find where water is getting in and check whether it’s a sealant joint.
- We cut out the failed silicone, taking care of the glass and frame.
- The glass and frame are cleaned and degreased.
- We apply a neutral-cure glazing silicone and tool it smooth.
- We look over every joint and, where we can, test it with water.
Before we arrive
- On commercial sites, let us know about site rules
- Plan for the work area to be out of bounds to pets and children
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
If you’re in Broughton and need glazing silicone, ring 0345 464 0079 or send us an email. Tell us what the problem is and where, and you’ll get a clear quote before work begins.
Read more
When something else is needed
We will always be straight with you, so here’s what sealant cannot fix:
- A sagging or failing conservatory roof
- Leaks from the roof covering or flashing (a roofer’s job)
- Condensation trapped between two panes
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly before booking.
What we seal
- Glass balustrade bases
- Rooflights
- Glass-to-frame joints
- Shower screens
- Glass-to-glass joints
- Conservatory frames
What glazing silicone looks like in Broughton
Historic houses like Broughton Castle (about 0.3 miles south-west) are a reminder that the area around Broughton has older buildings as well as new. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window. Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
For an older house near a landmark such as Church of St Mary the Virgin, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint. Letting a property close to Banbury station? Then a shower screen or conservatory joint that leaks is easier to reseal while the property is empty. Managing a site like Bishop Carpenter Church of England Aided Primary School? Then the mastic around its windows and doors needs looking after like any other building’s.
Broughton is about 2 miles south-west of Banbury, in Oxfordshire. Jobs in Broughton get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Across Oxfordshire, we cover 443 places, and Broughton is one of them. Oxford is on our list too, about 21 miles from Broughton.
Here we cover the OX15 postcode area for glazing silicone. You’ll find streets such as Danvers Close, Danvers Road and Wykham Lane. If you’re just outside Broughton, we cover North Newington (1 mile north), Neithrop (2 miles north-east), Ruscote (2 miles north-east), Bloxham (2 miles south) and Drayton (2 miles north). Larger places within reach include Bicester (14 miles south-east), Bure Park (13 miles south-east), Chipping Norton (10 miles south-west), Grimsbury (3 miles north-east), Woodstock (14 miles south) and Bodicote (3 miles east).
Around Broughton
Locally, jobs take us to homes and businesses close to The Roebuck Public House, The Warriner School and Tudor Hall School and the streets around them. Broughton’s nearest station is Banbury station, roughly 2.7 miles north-east of the centre. Other landmarks nearby include Bloxham Village Museum (1.8 miles south) and Castle Quay Shopping Centre (2.6 miles north-east). The countryside around Broughton includes Crouch Hill and Woodford Bottom and Lamb's Pool.
Why it’s worth doing now in Broughton
Glazing joints need a sealant made for the job. General-purpose sealant from a DIY shop may not suit glass or the frame, so we use neutral-cure glazing silicone. Around Broughton, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.
Why Broughton customers choose us
- Full insurance on every job
- Sanitary silicone with an anti-fungal additive in wet areas
- Rated 4.9 stars on Google
- Sealant colour chosen to suit
Take a look at how sealant jobs are priced and what customers say.
Quotes for glazing silicone in Broughton
Your quote is based on your job. We take into account:
- How many rooms, windows or areas are involved
- Access and height
- Mould in or behind the old joints
- How much there is to do
Leaving a failed joint normally makes the job bigger, not smaller. If you’re not sure whether it needs doing, phone 0345 464 0079 or email us and we will give you an honest view and a quote.
What we need to know
Before you ask for a quote, have a think about:
- Where the job is, and your postcode
- Photos by email, if that is easy
- How we’d reach the joints
- The type of property
Asking for a quote is easy: let us know the job and the location and its rough size. A few photos by email make the job easier to understand, and we will come back to you with a quote.