Kent · England
Floor & skirting joints in Crouch, Kent
Professional floor joint sealing in and around Crouch, with old sealant always removed completely and a one-year guarantee.
- Gaps between floors and kitchen plinths
- Tiled floors with no room to move
- Open gaps along the bottom of skirting boards
About our floor joint sealing in Crouch
In commercial and industrial units, concrete floor joints take a hammering from wheels and traffic. Each is resealed with a floor-joint product suited to what runs over it. We work on commercial floors, skirting boards and concrete floor joints, and people most often call us about chipped and open joints in warehouse floors and perimeter joints in tiled floors filled with grout.
Older homes in small places like Crouch often have timber floors that move with the seasons, which is why skirting and threshold joints need a flexible sealant, not filler.
Whatever the size of the job, you get the same one-year guarantee in Crouch and across Kent.
- Location
- Crouch (TN15)
- Region
- Kent
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
How to look after the new joints
To keep the joints looking good and working properly:
- Have a cracking tiled floor checked before tiles break
- Vacuum floor joints regularly to stop grit building up
- Check the sealant is paintable before decorating
- Keep floor cleaning water to a minimum at the edges
In commercial units, keep pallet trucks and heavy wheels off new joints until they’ve cured. Cone off the area if needed until it’s ready.
Water getting into floor joints in bathrooms and kitchens can damage what’s underneath. A sound seal stops that happening.
Floor joint sealing around Crouch
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they don’t all move the same way. The joint at the skirting or threshold has to allow for that.
For landlords with property near Borough Green & Wrotham station, gaps at skirtings and thresholds are worth sealing between tenancies. Schools such as Borough Green Primary School are buildings too, and floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. If you look after a church, hall or community building such as Church of St Mary, joints in its floors, skirtings and thresholds need resealing as they wear.
Crouch is about 6 miles east of Sevenoaks, in Kent. Jobs in Crouch get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Crouch is one of 922 towns and villages in Kent we cover for floor joint sealing. For nearby work, see our London page, about 23 miles away.
Postcode districts we cover here for floor joint sealing: TN15. If you need floor joint sealing at a property on Basted Lane and Long Mill Lane or anywhere close by, our applicators can take on the job. We also cover Claygate Cross (1 mile west), Basted (1 mile north-west), Platt (1 mile north-east), Comp (1 mile north-east) and Borough Green (1 mile north). Larger places within reach include Maidstone (9 miles east), Dartford (12 miles north), Sevenoaks (6 miles west), Royal Tunbridge Wells (10 miles south), Gravesend (11 miles north) and Tonbridge (6 miles south).
Local landmarks in Crouch
Around Crouch, our work takes us to homes and buildings near Wrotham School, Ivy Hatch Nature Reserve and The Chequers Inn and the streets around them. Crouch’s nearest station is Borough Green & Wrotham station, roughly 1.2 miles north. Other landmarks nearby include Sevenoaks Hospital (5.3 miles west) and Ightham Court (1.8 miles north-west).
Landlord and commercial work in Crouch
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
FAQs for Crouch
Can you do floor joint sealing in Crouch?
Yes, Crouch is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or send us an email and tell us what needs doing.
I let a flat near Borough Green & Wrotham station. Can you help?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.
Can you reseal concrete floor joints in an industrial unit?
Yes. Old filler is cleaned out and the joint resealed with a floor-joint product. Let us know about the traffic.
Is caulk good enough for skirting?
Because caulk cracks where there’s movement or water. Floor edges move through the year, so a flexible sealant suits them better.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Why does the gap under my skirting keep coming back?
Timber floors and skirting shrink and swell through the year. A flexible sealant closes the gap without cracking like caulk.
Is the work guaranteed?
Yes, always. There’s a 12-month guarantee on every job.
When can I walk on the floor?
We will tell you before we leave. That depends on the product, and light foot traffic is normally fine before wet cleaning or wheels.
What happens if it’s left?
Open joints along wet floors let water into the subfloor and behind skirting. Dealing with it early keeps the repair to the joint. In a small place like Crouch, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are not sure whether it needs doing, call 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
Why choose Mr Mastic in Crouch
- We agree the colour with you first
- Over 20 years’ experience
- Every job guaranteed for a year
- Arbo and Everbuild products
See what affects the cost or our reviews.
Can I do it myself?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
What we do, step by step
Once we are on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes a morning or an afternoon for most homes. Somewhere as small as Crouch, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by looking at the floor, the gap and the traffic, then choose the product.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- The sealant goes in, chosen for the floor and coloured to suit it.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
Before we arrive
- Mention if the joints have been sealed before
- Try not to wet indoor joints just before the visit
- Clear items away from the joints we are working on
Get a quote
We do not publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or send us an email.
Related advice
What the job involves on each surface
Commercial floors
Washroom and kitchen floors in commercial buildings need sound edge joints. They’re resealed with a flexible, water-resistant sealant.
Concrete floor joints
Sawn joints in concrete floors control where it cracks. They’re resealed with a product chosen for what runs over them.
What affects the cost of floor joint sealing
The quote reflects the job in front of us. We take into account:
- Any working-time requirements on site
- Which sealant suits the joint
- The number of rooms or windows
- How easy the joints are to reach
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What to tell us for a quote
To help us quote quickly, let us know:
- The rough size of the job
- Whether it has been sealed before
- A few photos by email, if you can
- What the problem is, such as mould, gaps, leaks or cracking
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job.