Essex · England
Willows Green Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Willows Green and across Essex. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Fire seals that have cracked with movement
- Sealant items on a fire risk assessment action list
- Unsealed gaps where pipes and cables go through a wall
About our fire rated sealant in Willows Green
Intumescent sealant looks much like any other sealant until it gets hot; then it swells to help close the gap. Which product suits a gap depends on its width, the materials either side and what runs through it. We are often asked to deal with gaps where walls meet ceilings or slabs and open holes round services passing through fire walls, across linear gaps, plasterboard & masonry and pipe & cable gaps.
Somewhere as small as Willows Green, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
You’re covered for a year from the day we finish. If anything is not right with it, phone 0345 464 0079 or send us an email.
- Where
- Willows Green (CM3)
- Wider area
- Essex
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Landlord and commercial work in Willows Green
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Nearby places to Willows Green
Other services in Willows Green
Why act early in Willows Green
Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own and needn’t wait for anything else. Around Willows Green, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
The cost depends on the amount of work, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts.
Why us?
- Tidy, careful work
- ARBOMaster approved applicator
- One-year guarantee on every job
- Homes, businesses and hotels
Read our cost guide and customer reviews.
Aftercare tips
How long the joints last depends on use and care. Here’s what we suggest:
- Make resealing part of every contractor’s brief
- File the fire-stopping record where your assessor can find it
- Include hidden areas like risers in routine checks
- Never patch a fire seal with standard sealant
File the record of locations and products with your fire safety paperwork. It saves time at the next inspection or assessment.
It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole and the job gets bigger.
When it is not the sealant
A few problems are outside what sealant work can do:
- A wall that is not a fire-resisting element to begin with
- Deciding what fire stopping a building needs
- Certifying a building or signing off its fire safety
If in doubt, ring 0345 464 0079 or drop us an email and we will say what we think.
Joints and surfaces we work on
- Service penetrations
- Plasterboard & masonry
- Door frames
- Linear gaps
- Pipe & cable gaps
- Flats & HMOs
Common questions in Willows Green
Do you cover Willows Green for fire rated sealant?
Yes, Willows Green is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job.
Will you come out to Willows Green?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
What does intumescent mean?
An intumescent sealant expands when it gets hot to help seal the gap. It’s one type of fire-rated sealant; the right one depends on the gap and what passes through it.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Can I add another job to the visit?
Yes. More than one area can go on one quote.
Do the sealants smell?
There can be a smell while the sealant cures, but it fades. Ventilation helps.
Can I use normal mastic around a pipe through a fire wall?
No. Standard sealants aren’t made or tested to stop fire. If it’s been used, we remove it and use the right product.
How long does fire rated sealant take?
Typically it takes from a few hours to a few days, depending on the number of gaps and the access. Bigger jobs take longer, and we will say how long yours will take.
The process
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes anything from a few hours to several days, depending on how many gaps there are. For a village or hamlet like Willows Green, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Preparing for the visit
- Mention if the joints have been sealed before
- Let us know if you’ve seen damp or leaks
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
Want a quote for fire rated sealant? Please phone 0345 464 0079 or email us with a few details. We’ll explain what we’d do and send you a clear quote before any work starts.
Read more
Fire rated sealant around Willows Green
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Around Willows Green, as everywhere, fire rated sealant is only as good as the preparation behind it. If you let a flat or house near Braintree station, any gap left by new services in shared walls should be closed with a fire-rated product.
Willows Green is about 4 miles south-west of Braintree, in Essex. Jobs in Willows Green get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Across Essex, we cover 644 places, and Willows Green is one of them. For nearby work, see our Chelmsford page, about 8 miles away.
All of CM3 is within our area for fire rated sealant. Streets in the area include Main Road and Evelyn Road, all of which we cover. We also cover the places around Willows Green: Bannister Green (2 miles north-west), Little Leighs (2 miles south), Watch House Green (2 miles north-west), Blake End (2 miles north-west) and Causeway End (2 miles west). Larger places within reach include Chelmsford (8 miles south), Braintree (4 miles north-east), Maldon (11 miles south-east), Witham (7 miles south-east), Halstead (9 miles north-east) and Great Dunmow (6 miles west).
Around Willows Green
Locally, jobs take us to homes and businesses close to Cuckoo Wood, among other places. Willows Green’s nearest station is Braintree station, about 3.1 miles north-east. Other landmarks nearby include Tudor House Museum (Braintree) (3.7 miles north-east) and William Julien Courtauld Hospital (2.7 miles north-east). For a walk, there’s Phyllis Currie Nature Reserve.
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Different surfaces, different methods
Plasterboard walls
Many fire-resisting walls in flats, offices and conversions are plasterboard. We use a product tested in that kind of wall.
Flats and HMOs
Conversions normally leave a mix of old and new service holes. The gaps on your list are sealed with a fire-rated product and the locations noted.