Oxfordshire · England
Wheatley Fire Rated Sealant
Fire rated sealant for Wheatley and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Damaged fire sealant left by other trades
- Old fire sealant that has split or come away
- Linear gaps at the head of walls
What happens if it’s left?
Items left open on a fire risk assessment tend to come back at the next review. Getting them done and written up means you can show the action was taken. Homes in smaller places like Wheatley can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Why book with us
- Experience in homes, commercial sites and hotels
- Over 20 years’ experience
- One-year guarantee on every job
- ARBOMaster approved applicator
Take a look at how sealant jobs are priced or our reviews.
How we handle fire rated sealant in Wheatley
Landlords, managing agents and facilities teams use us for the sealant items on a fire risk assessment on buildings across Wheatley. Send us the list or the survey and we will quote for the fire-rated sealant work on it. If you have gaps left after a refit or conversion and fire seals that have cracked with movement, we can help, whatever the surface.
If you run a pub, café, guest house or shop in or near Wheatley, its washrooms and kitchen need the same sealant care as any big building.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Place
- Wheatley (OX33)
- Region
- Oxfordshire
- Cover
- One year on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Keep the record of products and locations with your fire safety documents
- Allow for resealing whenever new services are run
- Get damaged fire seals looked at promptly
- Do not fill fire-stopping gaps with ordinary foam or silicone
Any fire seal that’s cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.
The process
There isn’t much for you to do on the day. Point us to the joints and we’ll get on with it. The work itself takes a few hours for a handful of gaps, and longer for a whole building, including the tidy-up. In a smaller place like Wheatley, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
Getting ready for the visit
- Mention if the joints have been sealed before
- Mention any leaks or damp you’ve noticed
- Clear the area around the work
Get a quote
If you are in Wheatley and need fire rated sealant, ring 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Advice
Common problems we fix in Wheatley
Gaps around door frames are easily missed. The gap between the frame and the wall is hidden behind the architrave, so it can be left open when a door is replaced.
The most common problems we see are:
- Open gaps behind door architraves
- New service routes left unsealed after building work
- Unsealed gaps where pipes and cables go through a wall
- Gaps where walls meet ceilings or slabs
Managing a site like Wheatley Church of England Primary School? Then fire-stopping around service openings should be restored whenever new services go in.
What to look for in a quote
- How the colour is chosen
- Is the old sealant removed completely?
- What product goes in the joint
- What the quote includes, VAT included or not
Places near Wheatley
More services for Wheatley
How the job changes by surface
Flats and HMOs
Working in occupied flats needs some planning. We agree access to each flat and the common parts before we start so residents know what to expect.
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Loose material is removed so the sealant has a firm edge.
Fire rated sealant around Wheatley
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For buildings such as Church of St Mary, service openings in its walls need the right fire-rated sealant, as in any building.
Wheatley is about 4 miles east of Oxford, in Oxfordshire. We provide fire rated sealant to homes and businesses in Wheatley, as part of our work across Oxfordshire. Wheatley is one of 443 places in Oxfordshire where we work.
All of OX33 is covered for fire rated sealant. We cover properties on Church Road, High Street and Station Road and the roads around them. We also cover Holton (1 mile north), Littleworth (1 mile west), Cuddesdon (2 miles south), Forest Hill (2 miles north-west) and Horspath (2 miles west). Larger places within reach include Oxford (4 miles west), Didcot (11 miles south-west), Bicester (11 miles north), Abingdon-on-Thames (8 miles south-west), Thame (7 miles east) and Kidlington (8 miles north-west).
What’s near Wheatley
Locally, jobs take us to homes and businesses close to 19 pub and Wheatley Park School. Other landmarks nearby include Slade Hospital (2.8 miles west) and Templars Square (3.6 miles west). Green spaces nearby include CS Lewis Nature Reserve and Shotover.
Wheatley: your questions answered
Is Wheatley in your area for fire rated sealant?
Yes, Wheatley is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or send us an email and let us know what needs doing.
Is Wheatley within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you give us a record of the work?
Yes. We note each location and the product that went in so it’s there for the next inspection.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Will the old sealant be removed?
Yes, every time. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected.
Do I have to be there?
It depends on the job. Inside work needs someone to give us access, and for outside work we’ll agree access with you when we book.
What does fire rated sealant cost?
It depends on the job, so we quote each one individually. For a quick quote, phone 0345 464 0079 or send us an email with a short description of the job.
Work for landlords, hotels and businesses
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
Can I do it myself?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.