Oxfordshire · England

Fire-rated sealant in Tetsworth, Oxfordshire

Fire rated sealant across Tetsworth and nearby, with every bit of old sealant taken out first and a 12-month guarantee.

  • Open holes round services passing through fire walls
  • Door frames with gaps between frame and wall
  • Gaps filled with a product that isn’t fire-rated

Book fire rated sealant in Tetsworth

Common questions in Tetsworth

Do you cover smaller places like Tetsworth?

Yes, Tetsworth is covered. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.

Is Tetsworth in your area for fire rated sealant?

Yes. Our work covers London and the South East, and Tetsworth is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear price.

Will it make a mess?

Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.

What does intumescent mean?

An intumescent sealant expands when it gets hot. It’s one type of fire-rated sealant; the right one depends on the gap and what passes through it.

Can you seal over the old sealant?

No. Fresh sealant doesn’t stick to old sealant, and anything trapped underneath, including mould and water, stays there. We remove it all first.

Do you remove the old sealant?

Yes. All of the old material is cut out and the joint cleaned before applying anything new.

How long does fire rated sealant take?

It depends on the size of the job, but most jobs take from a few hours to a few days, depending on the number of gaps and the access. We’ll give you a better idea when we quote.

Do I have to be there?

That depends on where the joints are. Inside work needs someone to give us access, and for outside work we’ll agree access with you when we book.

How we handle fire rated sealant in Tetsworth

Deciding which gaps need fire stopping is not our role; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. We work on linear gaps, service penetrations and pipe & cable gaps, and the jobs we see most are open holes round services passing through fire walls and ordinary sealant used where a fire-rated product was needed.

If you have holiday lets, a converted barn used for business or a community building near Tetsworth, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.

A 12-month guarantee comes with the work, just as it does everywhere we cover.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Where
Tetsworth (OX9)
Wider area
Oxfordshire
Cover
A year, on every job
Price
Quoted before any work starts
Phone
0345 464 0079
Updated
26 October 2026

Different surfaces, different methods

Flats and HMOs

In occupied buildings, we plan the order of work with you. We agree access to each flat and the common parts before any work starts to keep disruption down.

Service penetrations

A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. We follow the manufacturer’s tested detail for each.

When to call us in Tetsworth

A lot of fire stopping is out of sight: above ceilings, inside risers and behind panels. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.

The problems people normally mention when they call include:

  • Fire seals that have cracked with movement
  • Sealant items on a fire risk assessment action list
  • Door frames with gaps between frame and wall
  • Fire stopping disturbed by later work

If you look after a church, hall or community building such as Church of St Giles, gaps around pipes and cables are worth checking after any building work there.

Comparing quotes

  • How long to leave it before use
  • How the surfaces are prepared before sealing
  • Whether they seal over old material or remove it
  • What product goes in the joint

Choosing a sealant specialist

Landlords, agents and businesses in Tetsworth

Landlords and agents in Tetsworth can book us as well as householders. Sealant work between tenants keeps a property looking cared for.

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.

What happens on the day

We work through the job in order: protect, prepare, seal, tidy. Typically it takes a few hours for a handful of gaps, and longer for a whole building and we leave things clean and tidy. For a village or hamlet like Tetsworth, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.

  1. We start with the survey or action list, checking the size and surfaces of every gap.
  2. Anything that isn’t fit for the job comes out, and the gap is cleaned.
  3. We put in whatever backing or fill the product detail specifies.
  4. The sealant goes in to the depth its detail sets, then it’s tooled off.
  5. Finally, we list where we worked and what we used, for your records.

Preparing for the visit

  • Keep children and pets away from the work area
  • On commercial sites, let us know about site rules
  • Let us know about stairs, lifts or work at height

Ask for a quote

Need a quote? Please phone 0345 464 0079 or drop us an email and tell us about the job. We’ll explain what we’d do and give you a clear quote before any work starts.

Get a quick quote

Read more

DIY sealant or a professional job?

Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.

Why act early in Tetsworth

Fire-rated sealants are less forgiving than ordinary ones. Depth, backing and surface preparation all affect how a seal performs, and we work to the product details every time. In a small place like Tetsworth, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.

Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we’ll go through it with you.

Why Tetsworth customers choose us

  • Sanitary silicone with an anti-fungal additive in wet areas
  • Over 20 years’ experience
  • We’re fully insured
  • Homes, businesses and hotels

Read what affects the cost and customer reviews.

What affects the cost of fire rated sealant

For a quick quote, just ask. The main things that affect it are:

  • How easy the joints are to reach
  • The number of rooms or windows
  • Whether old sealant or filler has to be cut out
  • The size of the job

Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.

Asking for a quote

Photos help, but a description is a good start. Please mention:

  • How we’d reach the joints
  • If it’s domestic, commercial or a hotel
  • Roughly how big the job is
  • Photos by email, if that’s easy

Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll take it from there.

What fire rated sealant looks like in Tetsworth

In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.

For site and facilities teams at buildings such as Tetsworth Primary School, service openings in fire-resisting walls need checking after any refurbishment. Letting a property close to Haddenham & Thame Parkway station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.

Tetsworth is about 3 miles south-west of Thame, in Oxfordshire. We carry out fire rated sealant for homes and businesses in Tetsworth and the surrounding area, as part of our work across Oxfordshire. Our Oxfordshire coverage runs to 443 places, Tetsworth among them. There’s also a page for Oxford, about 10 miles away.

Postcode districts we cover here for fire rated sealant: OX9. Whether your property is on High Street, Swan Gardens and Back Street or anywhere close by, our applicators can take on the job. Close by, we work in North Weston (2 miles north), Milton Common (3 miles north-west), Albury (3 miles north-west), Great Haseley (3 miles west) and Tiddington (3 miles north-west). Further out, we also cover Oxford (10 miles west), Didcot (12 miles south-west), Bicester (15 miles north-west), Abingdon-on-Thames (12 miles west), Thame (3 miles north-east) and Henley-on-Thames (13 miles south).

Around Tetsworth

We work in homes and buildings around The Swan pub, among other places. For rail, the closest station is Haddenham & Thame Parkway station, roughly 5 miles north-east of the centre. Well-known places in the area include Thame Museum (2.9 miles north) and Thame Community Hospital (2.8 miles north-east). Green spaces nearby include Wells Farm and Bald Hill.

Map of Tetsworth © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job