Essex · England
Ridgewell Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Ridgewell, backed by a one-year guarantee. Call for a quick quote.
- Standard silicone or caulk in a fire-stopping gap
- Unsealed gaps around fire door frames
- Seals cut through by electricians, plumbers or data installers
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Check risers, ceiling voids and cupboards during building checks
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Take pictures of fire stopping before ceilings or boxing go back
- Don’t paint over fire sealant until it has cured
Do not add foam, filler or ordinary sealant over a fire seal. Repairs should use a matching fire-rated product. Ask us if you are not sure which product was used.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes and the list grows.
Fire rated sealant for homes and businesses in Ridgewell
We do not assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We’re often asked to deal with door frames with gaps between frame and wall and joints picked up in a fire-stopping survey, across service penetrations, pipe & cable gaps and plasterboard & masonry.
Work in a small place like Ridgewell is planned ahead, journey included, so it can be fitted around guests, customers or events where possible.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Location
- Ridgewell (CO9)
- Wider area
- Essex
- Guarantee
- A year, on every job
- Price
- A clear price before work begins
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Also near Ridgewell
More services for Ridgewell
What happens on the day
On the day, we start by going over the job with you, so you know exactly what we’re doing. We protect the surfaces around the joints before we start. The work usually takes anything from a few hours to several days, depending on how many gaps there are. Somewhere as small as Ridgewell, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Mention any parking rules near the property
- For business premises, tell us about site rules or sign-in
- Let us know if you’ve seen damp or leaks
How to get a quote
Asking for a quote is easy: tell us what needs doing and where and its rough size. A few photos by email make the job easier to understand.
Related advice
Different surfaces, different methods
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Loose material is removed so the sealant has a firm edge.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. We seal them to the tested detail, with backing where it’s needed.
What affects the quote in Ridgewell
Your quote is based on your job. We take into account:
- When we can work, for business premises
- How many areas need sealing
- The amount of work
- Any mould that needs treating
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote.
What we need to know
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Photos by email, if that is easy
- If it’s domestic, commercial or a hotel
- Where the property is
- The problem you’ve noticed
We do not publish a price list. Instead, we give you a clear quote for your job. To get started, ring 0345 464 0079 or email us.
When it is not the sealant
It helps to know what we can’t do:
- A wall that is not a fire-resisting element to begin with
- Deciding what fire stopping a building needs
- Openings too large for sealant, which need batts, boards or another system
If you are not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer.
Joints and surfaces we work on
- Plasterboard & masonry
- Service penetrations
- Flats & HMOs
- Pipe & cable gaps
- Linear gaps
- Door frames
Fire rated sealant in Ridgewell: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For site and facilities teams at buildings such as Ridgewell Church of England Primary School, fire-stopping around service openings should be restored whenever new services go in.
Ridgewell is in Essex. Our applicators cover fire rated sealant for homes and businesses in Ridgewell and nearby, as part of our work across Essex. Across Essex, we cover 644 places, Ridgewell among them. We also work in Chelmsford, around 21 miles away.
We cover every part of CO9 for fire rated sealant and the streets around it. We cover properties on Mill Road, Rose Walk and Colne Springs. We also cover Wesley End (1 mile south-west), Oaker Hill (1 mile south-east), Baythorne End (1 mile north-west) and Stambourne (2 miles south-west). Further out, we also cover Braintree (11 miles south), Saffron Walden (12 miles west), Halstead (8 miles south-east), Great Dunmow (14 miles south-west), Great Notley (12 miles south) and Bocking (11 miles south).
Near you in Ridgewell
Around Ridgewell, our work takes us to homes and buildings near The King's Head Public House and Stoke College and the streets around them. Well-known places in the area include Clare Castle (3.5 miles north-east) and Toppesfield Museum of The Working Horse (2.2 miles south).
Why act early in Ridgewell
Waiting for the next refit can leave a gap open for years. On its own, sealing it now is a small job and needn’t wait for anything else. Older cottages and farmhouses around Ridgewell can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
What you pay reflects the work, not guesswork. That is why we ask about the job first and agree the price before starting.
Why Ridgewell customers choose us
- We never seal over old sealant
- Fully insured
- Every job guaranteed for a year
- An ARBOMaster approved applicator
Take a look at our cost guide or what customers say.
Your questions about fire rated sealant in Ridgewell
Can you do fire rated sealant in Ridgewell?
Yes. We work across London and the South East, and Ridgewell is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job.
Will you come out to Ridgewell?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Will you assess my building’s fire safety?
No, assessment is not something we do. Once you have a specification or action list from your assessor or designer, we can quote for the fire-rated sealant items.
Do you seal gaps around fire door frames?
Yes. The joint between frame and wall is sealed with a fire-rated sealant. The door, its seals and closer are for a door specialist.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
Can you do several jobs on one visit?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Will there be a smell?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
What information do you need?
Let us know what needs doing and where, plus pictures if you have them. We’ll ask anything else we need to know.
When to call us in Ridgewell
Movement in the structure can open gaps too: a seal that cracks or pulls away leaves a path for smoke. Damage from cleaning, knocks and maintenance adds to it.
Look out for any of the following:
- Gaps left after a refit or conversion
- Unsealed gaps around fire door frames
- Seals cut through by electricians, plumbers or data installers
- Cracked or shrunken fire-rated sealant
For buildings such as Parish Church of St Lawrence, service openings in its walls need the right fire-rated sealant, as in any building.
What to look for in a quote
- Whether VAT is included
- Whether the sealant suits the joint
- How the joint is cleaned and prepared
- Are they insured?