Oxfordshire · England
Peppard Hill Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Peppard Hill. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Linear gaps at the head of walls
- Damaged fire sealant left by other trades
- Joints picked up in a fire-stopping survey
Fire rated sealant in Peppard Hill, done properly
We often work from an action list drawn up by a fire risk assessor. Send us the list or the survey and we’ll quote for the fire-rated sealant work on it. If you are dealing with open joints along the top of partitions and gaps around pipes and cables through fire-resisting walls, we can put it right, on service penetrations, door frames and pipe & cable gaps alike.
Work in a small place like Peppard Hill is planned ahead, journey included, so the job can fit around bookings, guests or opening times where possible.
There’s a 12-month guarantee on every job, whatever its size.
- Location
- Peppard Hill (RG9)
- Wider area
- Oxfordshire
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
DIY versus a professional finish
A DIY attempt does not rule out a professional job. We cut it out and start again.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
What the job involves on each surface
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. We seal it with a product tested for that service and gap size.
Flats and HMOs
In occupied buildings, we plan the order of work with you. Access to flats and common areas is agreed in advance.
Places near Peppard Hill
Other services in Peppard Hill
What sealant work cannot fix
We will not take on work that won’t last, so these are the limits:
- Doors that are not fire doors in the first place
- Large holes that need a different fire-stopping system
- Fire risk assessments, which need a qualified assessor
If you’re not sure, just phone 0345 464 0079 or email us and we will give you a straight answer.
What we seal
- Linear gaps
- Flats & HMOs
- Plasterboard & masonry
- Service penetrations
- Pipe & cable gaps
- Door frames
Landlords, agents and businesses in Peppard Hill
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Commercial buildings in Peppard Hill
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
For buildings such as The Church of Christ the King, gaps around pipes and cables are worth checking after any building work there. Rented homes near Henley-On-Thames station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Managing a site like Peppard Church of England Primary School? Then fire-stopping around service openings should be restored whenever new services go in.
Peppard Hill is about 4 miles north of Caversham, in Oxfordshire. Whether you are in the middle of Peppard Hill or further out, we cover fire rated sealant for every kind of property. Our area takes in 443 places across Oxfordshire.
Jobs for fire rated sealant in RG9 works the same way as everywhere else we cover. Local streets include Stoke Row Road, Chiltern Bank and Chiltern Road, all of which we cover. Neighbouring places we cover for fire rated sealant include Kingwood Common (1 mile north-west), Rotherfield Peppard (1 mile east), Sonning Common (1 mile south-east), Shepherd's Green (1 mile north-east) and Kidmore End (1 mile south). We also work in nearby towns such as Didcot (12 miles north-west), Thame (15 miles north), Henley-on-Thames (4 miles east), Benson (8 miles north-west), Chinnor (12 miles north) and Tilehurst (5 miles south-west).
Near you in Peppard Hill
In Peppard Hill, that means homes and buildings near Maiden Erlegh Chiltern Edge, The Warwick School and The Greyhound pub and the streets around them. For rail, the closest station is Henley-On-Thames station, about 3.9 miles east. Well-known places in the area include Battle Hospital (4.8 miles south). Not far away are Warburg Nature Reserve.
How to look after the new joints
Simple care keeps the joints in good condition. We recommend:
- Store the list of sealed gaps with your building paperwork
- Don’t paint over fire sealant until it has cured
- Keep photos of seals that will be hidden
- Include fire stopping when you schedule refits
Any fire seal that’s cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
Open gaps do not only matter in a fire: noise, draughts and even pests can come through too. Sealing them early helps on every front.
How the visit works
When we arrive, we start by going over the job with you, so you know exactly what we’re doing. We protect the surfaces around the joints before any work begins. Most jobs take anything from a few hours to several days, depending on how many gaps there are. Somewhere as small as Peppard Hill, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
How to prepare
- Clear the area around the work
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any water getting in
Ask for a quote
For a quote, call 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Read more
What affects the quote in Peppard Hill
Call for a quick quote. The main things that affect it are:
- Whether the work is at height
- How many areas need sealing
- The number and length of the joints
- Which sealant suits the joint
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Ask us for a quote and we will go through it with you.
What we need to know
Before you ask for a quote, have a think about:
- The problem you’ve noticed
- How we’d reach the joints
- How many joints, rooms or windows are involved
- Any previous sealing or DIY work
We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, phone 0345 464 0079 or email us.
Common questions in Peppard Hill
Do you cover smaller places like Peppard Hill?
Yes. Peppard Hill is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Henley-On-Thames station. Can you help?
Yes. We work for landlords and letting agents as well as householders, and several properties can be quoted together. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we will send you a clear quote.
Do you carry out fire risk assessments?
No. Your fire risk assessor, designer or building control decides that. Our job is applying the sealant to their specification.
Do you provide details of the products used?
Yes. You get a list of where we worked and what we used.
Is intumescent sealant the same as fire-rated sealant?
An intumescent sealant expands when it gets hot. Intumescent sealants are one kind of fire-rated sealant; the right one depends on the gap and what passes through it.
Can you seal over the old sealant?
No, and we never do. It may look fine at first, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Can ordinary silicone be used in a fire-stopping gap?
No. Where a fire-rated seal is needed, it has to be a product tested for that use, installed to its details.
Can you work in occupied buildings?
Yes. We work in flats, HMOs, schools, offices and other commercial buildings, including occupied ones. We agree access and the order of work with you first.