Essex · England
Fire Rated Sealant in Parkeston
Fire rated sealant across Parkeston and nearby, with old sealant always removed completely.
- Gaps left after a refit or conversion
- Open joints along the top of partitions
- Open holes round services passing through fire walls
Fire rated sealant for homes and businesses in Parkeston
Fire stopping only performs as intended if it’s done to the detail: the right depth, the right backing and the right product for the substrate. That detail is what we take care over. Common call-outs are for open gaps behind door architraves and standard silicone or caulk in a fire-stopping gap, on flats & HMOs, plasterboard & masonry and door frames.
In a village or hamlet like Parkeston, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Big or small, it’s backed by our 12-month guarantee.
- Where
- Parkeston (CO12)
- Region
- Essex
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Common questions in Parkeston
Will you come out to Parkeston?
Yes. Parkeston is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Harwich International station?
Yes, we work for landlords and letting agents. You can call 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before work begins.
Is there a guarantee?
Yes, always. Each job is guaranteed for twelve months, wherever you are.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Are you an approved applicator?
Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Can you seal over the old sealant?
No. New silicone will not bond to old silicone, and anything trapped underneath, including mould and water, stays there. We remove it all first.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.
Can you match the sealant colour?
We help you choose a colour that suits. The choice depends on the product the joint needs.
How it works
There’s no need to move everything out before we come, just the space around the work. We protect the rest, and the job takes from a few hours to a few days, depending on the number of gaps and the access for a typical job. In a small place like Parkeston, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed and the faces cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your files.
How to prepare
- Mention any parking rules near the property
- Move anything stored near the joints
- Where the joints are inside, avoid wetting them before we arrive
Get a quote
We don’t publish a price list, because every job is different. Instead, we give you a clear price for your job. To get started, phone 0345 464 0079 or send us an email.
Read more
Why it’s worth doing now in Parkeston
For some gaps, sealant is not the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. If a gap isn’t suitable for sealant, we will tell you. In a small place like Parkeston, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
What you pay reflects the work, not a rough estimate. That’s why we ask about the job first and agree the price before starting.
Why Parkeston clients choose us
- Full insurance on every job
- Experience in homes, commercial sites and hotels
- Neat joints and a tidy finish
- Approved under the ARBOMaster scheme
See our cost guide or what customers say.
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Take pictures of fire stopping before ceilings or boxing go back
- Make resealing part of every contractor’s brief
- Keep the record of products and locations with your fire safety documents
- Flag any open gap you spot round a pipe or cable
Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. A lot of damaged fire stopping comes from later work.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Catching it then saves a separate visit later.
What we can’t put right
Some problems need a builder, plumber or other trade rather than us:
- Assessing a building’s fire safety
- Issuing a fire rating or certificate for a building
- Walls or floors that weren’t built to resist fire
If you are not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer.
What we seal
- Linear gaps
- Flats & HMOs
- Pipe & cable gaps
- Door frames
- Service penetrations
- Plasterboard & masonry
Work for landlords, hotels and businesses
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll quote.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Workplaces and buildings in Parkeston
For seaside hotels, guest houses and holiday lets around Parkeston, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For site and facilities teams at buildings such as Spring Meadow Primary School & School House Nursery, service openings in fire-resisting walls need checking after any refurbishment. If you look after a church, hall or community building such as St Paul's Church, service openings in its walls need the right fire-rated sealant, as in any building. Letting a property close to Harwich International station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Parkeston is about 1 mile north-west of Harwich, in Essex. Whether you’re in the middle of Parkeston or further out, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Across Essex, we cover 644 places, and Parkeston is one of them. For nearby work, see our Chelmsford page.
Here we cover the CO12 postcode area for fire rated sealant. Whether your property is on Station Road, Hamilton Street and Tyler Street or anywhere close by, our applicators can take on the job. Main roads around Parkeston include the A136. We also cover Harwich (1 mile south-east) and Ramsey (2 miles south-west). Larger places within reach include Clacton-on-Sea (11 miles south-west), Greenstead (14 miles west), Wivenhoe (14 miles south-west), Brightlingsea (13 miles south-west), Walton-on-the-Naze (7 miles south) and Bocking's Elm (11 miles south-west).
What’s near Parkeston
Around Parkeston, our work takes us to homes and buildings near Captain Fryatt pub and Harwich and Dovercourt High School and the streets around them. There’s a railway station in Parkeston itself: Harwich International station. Other landmarks nearby include Landguard Fort (2.9 miles east) and Harwich Museum (1.4 miles east). For a walk, there’s Copperas Wood.
Other services in Parkeston
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
What affects the quote in Parkeston
Jobs vary more than people expect. What affects the quote:
- How much there is to do
- How many areas need sealing
- Whether the work is at height
- Any mould that needs treating
There are no prices on our website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or send us an email.
What we need to know
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- The problem you’ve noticed
- The address or postcode of the job
- Whether it’s a home or a business
- How many joints, rooms or windows are involved
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we’ll take it from there.