Essex · England
Fire-rated sealant in Newport, Essex
Professional fire rated sealant in and around Newport, with old sealant always removed completely and a one-year guarantee.
- Joints picked up in a fire-stopping survey
- Door frames with gaps between frame and wall
- Cracked or shrunken fire-rated sealant
Fire rated sealant in Newport, done properly
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap. We work on flats & HMOs, linear gaps and door frames, and the jobs we see most are gaps left after a refit or conversion and damaged fire sealant left by other trades.
Community buildings, schools and small businesses around places like Newport have washrooms and kitchens that see a lot of use. Sealant and fire-rated joints there matter as much as in any larger building.
Our work is backed for twelve months.
- Where
- Newport (CB11)
- Region
- Essex
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What happens if it’s left?
Sealant is not the fix for every opening. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. We’ll say so if a gap needs something other than sealant. In a smaller place like Newport, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
The cost depends on the amount of work, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts.
Why book with us
- Every job guaranteed for a year
- Domestic, commercial and hotel work
- 20+ years of sealant experience
- Trusted Arbo and Everbuild sealants
Read what affects the cost or our reviews.
FAQs for Newport
Do you cover Newport for fire rated sealant?
Yes. We work across London and the South East, and Newport is part of that. Just call 0345 464 0079 or send us an email with a few details of the job.
Can you help a landlord with a rental near Newport (Essex) station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Do you take out the old sealant first?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Can you seal over the old sealant?
No, and we never do. It can look neat for a few weeks, but the new bead soon lifts. The old sealant has to come out completely.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Do you seal gaps around fire door frames?
Yes, if the gap is within the product’s tested range. We seal the frame-to-wall gap, not the door itself.
What does intumescent mean?
Fire-rated is the broad term for sealants tested for fire stopping. Intumescent types expand when heated, and they’re one of the options. The specification and the tested detail decide which is used.
Can you tell me which gaps need fire stopping?
No, assessment isn’t something we do. Once you have a specification or action list from your assessor or designer, we’ll quote for the sealant work on it.
Keeping the joints in good condition
So the new joints stay in good condition:
- Take photos of fire stopping before ceilings or boxing go back
- Plan fire stopping into any work that goes through walls or floors
- Make resealing part of every contractor’s brief
- Ask which product was used before you paint
Don’t drill through or remove a fire seal without putting it back properly. If you need new services through a sealed wall, plan the fire stopping as part of the job.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is normally a straightforward job.
Places near Newport
Other services in Newport
What we cannot put right
Some problems need a builder, plumber or other trade rather than us:
- Fire doors that need new seals, closers or hardware
- Fire risk assessments, which need a qualified assessor
- Sign-off of the building, which sits with building control or your assessor
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think before booking.
Surfaces we seal
- Service penetrations
- Linear gaps
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
- Flats & HMOs
Surface by surface
Flats and HMOs
Converted houses often have gaps around old and new services. The gaps on your list are sealed with a fire-rated product.
Linear gaps
Some linear gaps have to cope with movement as well as fire. The product and depth are chosen to suit both, following the tested detail.
Fire rated sealant in Newport: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For buildings such as Church of St Mary the Virgin, service openings in its walls need the right fire-rated sealant, as in any building. Managing a site like Joyce Frankland Academy? Then service openings in fire-resisting walls need checking after any refurbishment.
Newport is about 3 miles south-west of Saffron Walden, in Essex. Our applicators cover fire rated sealant for homes and businesses in Newport, as part of our work across Essex. Newport is one of 644 towns and villages in Essex we cover. We also work in Chelmsford, around 21 miles away.
Work in CB11 works the same way as everywhere else we cover. Whether your property is on High Street, Station Road and London Road or anywhere close by, we can help. We also cover the places around Newport: Widdington (2 miles south-east), Quendon (2 miles south), Rook End (2 miles south-east), Debden (2 miles east) and Elder Street (3 miles east). We also work in nearby towns such as Saffron Walden (3 miles north-east), Great Dunmow (10 miles south-east), Stansted Mountfitchet (6 miles south), Newhall (15 miles south), Elsenham (5 miles south) and Church End (10 miles south-east).
Local landmarks in Newport
Around Newport, our work takes us to homes and buildings near White Horse Inn and Newport Primary School. Newport’s nearest station is Newport (Essex) station, roughly 0.5 miles south-east. A little further out are Saffron Walden Community Hospital (3.3 miles north-east) and Saffron Walden Museum (3 miles north-east). Not far away are Hales and Shadwell Woods.
Signs you need fire rated sealant in Newport
Over time, buildings change layout and use. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
It’s worth asking for a quote if you see:
- Joints picked up in a fire-stopping survey
- Linear gaps at the head of walls
- Holes left by a change of layout
- Fire seals that have cracked with movement
If you let a flat or house near Newport (Essex) station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Questions to ask before you book
- What the cure time is
- The length of the guarantee
- What preparation is included
- Who turns up on the day
Work for landlords, hotels and businesses
If you manage several properties in or around Newport, several properties can go on one quote. Just tell us the addresses and what each one needs.
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will give you a quote.
How the visit works
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, do the work and tidy away. Most jobs take a few hours for a handful of gaps, and longer for a whole building. A visit to Newport is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Finally, we list where we worked and what we used, for your records.
Before we arrive
- Keep pets and children clear of the area while we work
- For business premises, tell us about site rules or sign-in
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, call 0345 464 0079 or email us.