Essex · England
Fire-rated sealant in Little Maplestead, Essex
Fire-stopping gaps in Little Maplestead need attention? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Gaps flagged on a fire risk assessment
- Fire stopping disturbed by later work
- Gaps left after a refit or conversion
What sealant work can’t fix
It helps to know what we can’t do too:
- Issuing a fire rating or certificate for a building
- Fire risk assessments, which need a qualified assessor
- Doors that aren’t fire doors in the first place
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly.
Joints and surfaces we work on
- Plasterboard & masonry
- Service penetrations
- Linear gaps
- Door frames
- Flats & HMOs
- Pipe & cable gaps
How we handle fire rated sealant in Little Maplestead
Fire stopping only performs as intended if it’s done to the detail: the right depth, the right backing and the right product for the substrate. That is the part we focus on, gap by gap. If you are dealing with fire stopping disturbed by later work and ordinary sealant used where a fire-rated product was needed, we can help, whatever the surface.
For a small place like Little Maplestead, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
You get a one-year guarantee, the same in Little Maplestead as everywhere else we work.
- Location
- Little Maplestead (CO9)
- Wider area
- Essex
- Cover
- One year on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Work for landlords, hotels and businesses
Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Should I try it myself first?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
What we’re called out for in Little Maplestead
Much fire stopping is hidden: in ceiling voids, service risers and behind boxing. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
Look out for any of the following:
- Gaps left after a refit or conversion
- Seals cut through by electricians, plumbers or data installers
- Old fire sealant that has split or come away
- Gaps flagged on a fire risk assessment
Community buildings like St John the Baptist Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Comparing quotes
- How long the guarantee is
- When the joint can take water or movement
- What insurance they hold
- What the quote includes, VAT included or not
How it works
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take a few hours for a handful of gaps, and longer for a whole building. In a small place like Little Maplestead, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
Before we arrive
- For business premises, tell us about site rules or sign-in
- Move anything stored near the joints
- Let us know if you’ve seen damp or leaks
Get a quote
Need a quote? Please ring 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Advice
Fire rated sealant around Little Maplestead
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
For site and facilities teams at buildings such as The Ramsey Academy, service openings in fire-resisting walls need checking after any refurbishment. Rented homes near Bures station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Little Maplestead is about 3 miles north-east of Halstead, in Essex. If you need fire rated sealant in Little Maplestead, it’s easy to get a quote: please phone 0345 464 0079 or drop us an email. We cover Essex from our Crawley base. Across Essex, we cover 644 places, and Little Maplestead is one of them. You can also see our page for Chelmsford, roughly 18 miles from Little Maplestead.
Our applicators cover all of CO9 for fire rated sealant. That includes homes and businesses on Cock Road, Sudbury Road and School Road and the roads around them. We also cover Great Maplestead (1 mile west), Wickham St Paul (1 mile north), Pebmarsh (2 miles east), Halstead (3 miles south-west) and Colne Engaine (3 miles south-east). Larger places within reach include Colchester (12 miles south-east), Braintree (8 miles south-west), Witham (12 miles south), Camulodunum (11 miles south-east), Great Dunmow (15 miles south-west) and Greenstead (13 miles south-east).
What’s near Little Maplestead
The nearest railway station is Bures station, about 4.6 miles east of the centre. Nearby you will also find Halstead Hospital (2.2 miles south-west) and Hedingham Castle (2.8 miles west). The countryside around Little Maplestead includes Cornard Mere.
What affects the cost of fire rated sealant
For a quick quote, just ask. What matters most is:
- The amount of work
- How many rooms, windows or areas are involved
- The product the joint needs
- When we can work, for business premises
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or send us an email.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- The rough size of the job
- Whether it’s a home or a business
- How we’d reach the joints
- Any previous sealing or DIY work
We quote each job on its own. Simply call 0345 464 0079 or email us and describe the job.
Different surfaces, different methods
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We seal them along their full length leaving no stretch unsealed.
Masonry and concrete
Core-drilled and broken-out holes in concrete are often irregular. We check the gap size around the service against the product’s tested range.
Questions from Little Maplestead
Can you help a landlord with a rental near Bures station?
Yes, rental work is part of what we do. Just call 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear price.
Is Little Maplestead in your area for fire rated sealant?
Yes. Our work covers London and the South East, and Little Maplestead is part of that. You can phone 0345 464 0079 or send us an email and let us know what needs doing.
Does someone need to be in?
That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
What fire rating will the seal have?
We do not issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer, and we install to them.
Can you give us a record of the work?
Yes. We note each location and the product that went in.
Is standard sealant good enough for a fire gap?
No. Where a fire-rated seal is needed, it has to be a product tested for that use.
Do you remove the old sealant?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Is intumescent sealant the same as fire-rated sealant?
Intumescent means it swells when heated to help seal the gap. Intumescent sealants are one kind of fire-rated sealant; which product suits depends on the gap, the substrate and the service.