Wokingham · England
Fire-rated sealant in Kiln Green, Wokingham
Fire-stopping gaps in Kiln Green need attention? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Unsealed gaps where pipes and cables go through a wall
- Seals cut through by electricians, plumbers or data installers
- Gaps left after a refit or conversion
Fire rated sealant in Kiln Green
Ordinary silicone or decorators’ caulk in a fire-stopping gap is not a fire-rated seal. We cut out the wrong material and reseal with a fire-rated product tested for that kind of gap. We work on service penetrations, plasterboard & masonry and pipe & cable gaps, and common reasons people get in touch are old fire sealant that has split or come away and open joints along the top of partitions.
For a small place like Kiln Green, the journey and timings are agreed in advance, so it can be fitted around guests, clients or events where possible.
Whatever the size of the job, you get the same one-year guarantee in Kiln Green and across Wokingham.
- Place
- Kiln Green (RG10)
- Region
- Wokingham
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026

How the visit works
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the work takes a few hours for a handful of gaps, and longer for a whole building for a typical job. For a village or hamlet like Kiln Green, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
How to prepare
- Tell us if parking is tricky
- Mention any leaks or damp you’ve noticed
- Mention any tricky access
Getting a quote
Need a quote? Please call 0345 464 0079 or drop us an email and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Advice
Questions from Kiln Green
Do you cover Kiln Green for fire rated sealant?
Yes, Kiln Green is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job.
I let a flat near Wargrave station. Can you help?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Do you offer different sealant colours?
Yes. White, clear and grey are common, and other colours are available, and we will agree it with you first.
Are you an approved applicator?
Yes. We are approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Do you remove the old sealant?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Do you certify the fire stopping?
Ratings and certification sit with the product’s test evidence and whoever specified the work. Our part is installing the specified product to its tested details and giving you a record of where it went.
Where are you based?
We are a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and you will get one quote.
Towns and villages near Kiln Green
What else we do in Kiln Green
Fire rated sealant in Kiln Green: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Wargrave station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Managing a site like Knowl Hill Church of England Primary Academy? Then gaps opened by contractors for new cabling are a common finding in schools and offices.
Kiln Green is about 4 miles north-east of Woodley, in Wokingham. Kiln Green gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Kiln Green is one of 35 towns and villages in Wokingham where we work for fire rated sealant. For nearby work, see our Reading page.
Jobs for fire rated sealant in RG10 is quoted and booked the same way as anywhere else. If you need fire rated sealant at a property on Bath Road, Linden Hill Lane and Scarletts Lane or a nearby road, we can help. Neighbouring places we cover for fire rated sealant include The Holt (1 mile west), Hare Hatch (1 mile south-west), Waltham St Lawrence (1 mile south-east), Ruscombe (2 miles south-west) and Twyford (2 miles south-west). Further out, we also cover Reading (7 miles south-west), Wokingham (6 miles south), Woodley (4 miles south-west), Earley (6 miles south-west), Crowthorne (9 miles south) and Lower Earley (6 miles south-west).
What’s near Kiln Green
Locally, jobs take us to homes and businesses close to Blessed Hugh Faringdon Catholic School and The Queen Victoria pub. The nearest railway station is Wargrave station, roughly 2 miles west of the centre. Well-known places in the area include St Mark's Hospital (4.1 miles north-east) and Frazer Nash Archives (3.5 miles north-west). Open spaces near Kiln Green include Weycock Hill and Hurley Chalk Pit.
Why act early in Kiln Green
A quick fill with any sealant to hand is not fire stopping. Fire-rated products are tested in set gap sizes, depths and substrates, so both the product and the method matter. In a small place like Kiln Green, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
What you get with us
- Arbo and Everbuild products
- Tidy, careful work
- We are fully insured
- 12-month guarantee on every job
See what affects the cost and our reviews.
What we’re called out for in Kiln Green
A lot of fire stopping is out of sight: in ceiling voids, service risers and behind boxing. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
People normally contact us when they notice one of these:
- Gaps around pipes and cables through fire-resisting walls
- Sealant items on a fire risk assessment action list
- Holes left by a change of layout
- Fire stopping disturbed by later work
For buildings such as Saint Peter, service openings in its walls need the right fire-rated sealant, as in any building.
What your quote should include
- Which sealant they’ll use, and why
- Whether all the old sealant comes out first
- How the colour is chosen
- Is VAT in the price?
Work for landlords, hotels and businesses
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
Different surfaces, different methods
Linear gaps
Long, narrow gaps appear where walls meet slabs and ceilings. We seal them to the tested detail, with backing where it’s needed.
Door frames
Our work is the joint between frame and wall. The door leaf, its seals and closer need a door specialist.
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Never patch a fire seal with standard sealant
- Include fire stopping when you schedule refits
- Take photos of fire stopping before ceilings or boxing go back
- Flag any open gap you spot round a pipe or cable
Include fire stopping in your regular building checks. Look for cracks, gaps or sealant that has been cut or pulled out and get them seen to.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the list grows.
Should I try it myself first?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
