Essex · England
High Roding Fire Rated Sealant
Problem with your fire-stopping gaps in High Roding? We remove the old material, prepare the joints and seal them properly.
- Old fire sealant that has split or come away
- Gaps where walls meet ceilings or slabs
- Fire stopping disturbed by later work
Quotes for fire rated sealant in High Roding
Jobs vary more than people expect. The main factors:
- Any mould that needs treating
- How many areas need sealing
- The type of sealant required
- Whether old sealant or filler has to be cut out
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll go through it with you.
What we need to know
To make quoting easier, please include:
- What’s wrong with the joints now
- Photos by email, if that is easy
- The type of property
- Access, such as stairs, a lift or height
Every job is quoted individually. Just call 0345 464 0079 or email us with the details.
About our fire rated sealant in High Roding
Door frame gaps, linear joints and holes around services all have their own details. Measuring the gap and checking what it’s made of comes first, then apply it to the depth its tested detail calls for. We work on service penetrations, linear gaps and plasterboard & masonry, and people most often call us about door frames with gaps between frame and wall and damaged fire sealant left by other trades.
Work in a small place like High Roding is planned ahead, journey included, so it can be fitted around guests, clients or events where possible.
Your job is guaranteed for a year, as with all our work.
- Place
- High Roding (CM6)
- Wider area
- Essex
- Cover
- One year on every job
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Looking after it afterwards
Good habits help new joints last longer. A few tips:
- Look in service cupboards and ceiling voids from time to time
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Take pictures of fire stopping before ceilings or boxing go back
- Include fire stopping when you schedule refits
Don’t drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Get it sealed and recorded so you can show it was dealt with.
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Leave it or put it right?
Squirting in whichever sealant is nearest does not make a fire seal. Fire-rated products are tested in set gap sizes, depths and substrates, which is why we match the product and the method to each gap. Around High Roding, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
Why choose Mr Mastic in High Roding
- Trusted Arbo and Everbuild sealants
- Rated 4.9 stars on Google
- ARBOMaster approved applicator
- Every job guaranteed for a year
Take a look at what affects the cost and what customers say.
Common questions in High Roding
Do you cover High Roding for fire rated sealant?
Yes. Our work covers London and the South East, and High Roding is part of that. You can ring 0345 464 0079 or send us an email and tell us what needs doing, and we will send you a clear quote.
Will you come out to High Roding?
Yes. High Roding is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you seal over the old sealant?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you do not need to watch us work.
Can I use normal mastic around a pipe through a fire wall?
No. Standard sealants are not made or tested to stop fire. If it’s been used, we remove it and use the right product.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can I choose the sealant colour?
Yes. White, clear and grey are common, and other colours are available, and we agree the colour with you before work begins.
Where do you work from?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
Commercial buildings in High Roding
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Rented homes near Stansted Airport station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product. Community buildings like Parish Church of St Mary are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
High Roding is about 8 miles east of Bishop's Stortford, in Essex. High Roding gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 644 towns and villages across Essex, from the larger towns to small villages. Our Chelmsford page covers work nearby (9 miles or so).
Work in CM6 is quoted and booked the same way as anywhere else. Streets in the area include The Street, Owers Place and Broadfield, all of which we cover. Neighbouring places we cover for fire rated sealant include Great Canfield (1 mile west), Roundbush Green (2 miles south-west), Keeres Green (2 miles south), High Easter (2 miles south-east) and Stagden Cross (3 miles south-east). We also work in nearby towns such as Chelmsford (9 miles south-east), Braintree (11 miles east), Harlow (10 miles south-west), Brentwood (14 miles south), Billericay (15 miles south) and Witham (13 miles east).
What’s near High Roding
Typical jobs here are in homes near The Old Lamb (Public House) and the streets around them. For rail, the closest station is Stansted Airport station, roughly 4.8 miles north-west. Well-known places in the area include Little Easton Moat (3.8 miles north). For a walk, there’s Portingbury Hills.
What we cannot put right
We’d rather tell you now than do work that will not last, so these are the limits:
- Large holes that need a different fire-stopping system
- Fire doors that need new seals, closers or hardware
- Fire risk assessments, which need a qualified assessor
If you’re not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Door frames
- Plasterboard & masonry
- Linear gaps
What we do, step by step
Once we’re on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take from a few hours to a few days, depending on the number of gaps and the access. In a small place like High Roding, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- Where the tested detail needs backing or fill, we fit it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Finally, we list where we worked and what we used, for your records.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Let us know about earlier repairs to the joints
- Let us know about stairs, lifts or work at height
Getting a quote
For fire rated sealant in High Roding, phone 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Advice
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.