Essex · England
Fire-rated sealant in Hatfield Heath, Essex
Fire rated sealant in Hatfield Heath from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Unsealed gaps around fire door frames
- Old fire sealant that has split or come away
- Joints picked up in a fire-stopping survey
Fire rated sealant in Hatfield Heath
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate, with a record of the products and locations if you need one. If you are dealing with old fire sealant that has split or come away and unsealed gaps around fire door frames, we can help.
For holiday lets, converted business premises or a community building near Hatfield Heath, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
The work is covered for a year after we finish. If anything is not right with it, ring 0345 464 0079 or email us.
- Place
- Hatfield Heath (CM22)
- Region
- Essex
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Workplaces and buildings in Hatfield Heath
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For site and facilities teams at buildings such as Hatfield Heath Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices. If you look after a church, hall or community building such as Holy Trinity Church, older buildings that have had new heating or wiring often have service gaps worth checking.
Hatfield Heath is about 4 miles south-east of Bishop's Stortford, in Essex. For fire rated sealant in and around Hatfield Heath, it’s easy to get a quote: please call 0345 464 0079 or send us an email. We’re based in Crawley and cover Essex, Hatfield Heath included. We cover 644 towns and villages across Essex, large and small. You can also see our page for Chelmsford, roughly 13 miles from Hatfield Heath.
We cover every part of CM22 for fire rated sealant. That includes homes and businesses on Beehive Court, West Hayes and Cox Ley and the roads around them. Neighbouring places we cover for fire rated sealant include Ardley End (1 mile south-east), Hatfield Broad Oak (2 miles north-east), Bedlar's Green (3 miles north), Aythorpe Roding (4 miles east) and Start Hill (4 miles north). Larger places within reach include Chelmsford (13 miles south-east), Harlow (5 miles south-west), Brentwood (14 miles south), Loughton (13 miles south-west), Saffron Walden (14 miles north) and Waltham Abbey (12 miles south-west).
What’s near Hatfield Heath
We work in homes and buildings around The White Horse Inn Public House. The closest station to Hatfield Heath is Sawbridgeworth station, roughly 2 miles west of the centre. Well-known places in the area include Herts and Essex Hospital (3.8 miles north) and Harlow Mill (3.8 miles south-west). For a walk, there’s Sawbridgeworth Marsh and Portingbury Hills.
Hatfield Heath: your questions answered
Do you cover Hatfield Heath for fire rated sealant?
Yes. Our work covers London and the South East, and Hatfield Heath is part of that. You can ring 0345 464 0079 or email us and let us know what needs doing.
I let a flat near Sawbridgeworth station. Can you help?
Yes. We work for landlords and letting agents as well as homeowners. Just phone 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
What does fire rated sealant cost?
Size, access and the old material all affect the cost. Call for a quick quote and we will talk you through it.
Is it messy?
No. The area is protected while we work and cleaned up afterwards.
Do I need to be at home?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Do you carry out fire risk assessments?
No. We work from the specification you give us and install to the manufacturer’s details.
How long does the job take?
A typical job takes from a few hours to a few days, depending on the number of gaps and the access. Your quote will say how long we expect yours to take.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We will tell you what we’re using and why.
Quotes for fire rated sealant in Hatfield Heath
Call for a quick quote. What matters most is:
- How easy the joints are to reach
- How much old sealant there is and how hard it is to remove
- How much there is to do
- Any mould that needs treating
Doing several joints on one visit generally makes better use of the time than several visits. We’ll give you a clear quote for the lot.
Helping us quote
Before you ask for a quote, have a think about:
- If someone has resealed it before
- Pictures of the joints, sent by email
- Roughly how big the job is
- Whether it’s a home or a business
Need a quote? Please ring 0345 464 0079 or email us and tell us about the job. We will explain what we’d do and give you a clear price before any work starts.
What happens on the day
Most of a good job is in the preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it generally takes a few hours for a handful of gaps, and longer for a whole building. In a small place like Hatfield Heath, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- We put in whatever backing or fill the product detail specifies.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
Preparing for the visit
- Let us know if you’ve seen damp or leaks
- Tell us about any previous sealing or DIY attempts
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand, and we’ll take it from there.
Related advice
Honest limits
To be straight with you, some problems need a different trade:
- Assessing a building’s fire safety
- Fire doors that need new seals, closers or hardware
- A wall that isn’t a fire-resisting element to begin with
If you are not sure, just call 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.
Where we work in Hatfield Heath
- Service penetrations
- Door frames
- Linear gaps
- Pipe & cable gaps
- Flats & HMOs
- Plasterboard & masonry
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
Also near Hatfield Heath
Also in Hatfield Heath
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Check whether a sealant can be painted before decorating over it
- Make resealing part of every contractor’s brief
- Take pictures of fire stopping before ceilings or boxing go back
- Check risers, ceiling voids and cupboards during building checks
Follow the cure time we give you before decorating over the sealant. Some fire-rated sealants can be painted and some can’t, so ask us which we used.
An open gap isn’t only a fire issue: they also let noise, draughts and sometimes pests through. Dealing with them early helps with all of these.
Signs you need fire rated sealant in Hatfield Heath
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it is not installed as tested. Rushed fire stopping is common, especially where it was squeezed in at the end of a project.
Keep an eye out for these signs:
- Open holes round services passing through fire walls
- Door frames with gaps between frame and wall
- Standard silicone or caulk in a fire-stopping gap
- Old fire sealant that has split or come away
Rented homes near Sawbridgeworth station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.
Comparing quotes
- How long to leave it before use
- What preparation is included
- Which sealant they’ll use, and why
- Who does the work, and how experienced they are
Surface by surface
Service penetrations
New gaps tend to show up where services have been added. We clean out what’s there and reseal to the right depth with backing where the detail needs it.
Door frames
Behind most architraves is a gap between frame and wall. Where it’s open, we seal it to the product’s details for that gap size so the architrave can be refitted.