Essex · England
Creeksea Fire Rated Sealant
Fire rated sealant across Creeksea and nearby, with every bit of old sealant taken out first.
- Unsealed gaps where pipes and cables go through a wall
- Holes left by a change of layout
- Open joints along the top of partitions
Fire rated sealant for homes and businesses in Creeksea
Filling a fire-stopping gap with standard silicone or caulk does not make it fire-rated. We cut out the wrong material and the gap is resealed with a product tested for that use. We work on flats & HMOs, pipe & cable gaps and service penetrations, and common reasons people get in touch are seals cut through by electricians, plumbers or data installers and unsealed gaps where pipes and cables go through a wall.
For holiday lets, converted business premises or a community building near Creeksea, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
There’s a 12-month guarantee on every job, whatever its size.
- Where
- Creeksea (CM0)
- Wider area
- Essex
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Common problems we fix in Creeksea
Over time, buildings change layout and use. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
The problems people normally mention when they call are:
- Open gaps behind door architraves
- Old fire sealant that has split or come away
- Gaps filled with a product that is not fire-rated
- Fire stopping disturbed by later work
If you look after a building such as Ormiston Rivers Academy, fire-stopping around service openings should be restored whenever new services go in.
Comparing quotes
- Which colour the sealant will be
- How hidden problems are handled
- What product goes in the joint
- What preparation is included
Towns and villages near Creeksea
More services for Creeksea
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly.
Surface by surface
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We work along the whole run leaving no stretch unsealed.
Service penetrations
Different services need different details: metal pipes, cables and plastic pipes aren’t treated the same. We follow the manufacturer’s tested detail for each, and tell you if sealant alone is not the right fix.
Keeping the joints in good condition
Simple care keeps the joints in good condition. Our advice:
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Store the list of sealed gaps with your building paperwork
- Flag any open gap you spot round a pipe or cable
- Allow for resealing whenever new services are run
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes and the list grows.
Creeksea: your questions answered
Do you work for landlords with property near Burnham-On-Crouch station?
Yes, we work for landlords and agents. You can ring 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Do you take on hotel work around Creeksea?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Can I use normal mastic around a pipe through a fire wall?
No. Standard sealants aren’t made or tested to stop fire. We cut it out and reseal with a fire-rated product.
What does fire rated sealant cost?
It depends on the job, so we quote each one individually. For a quick quote, phone 0345 464 0079 or email us and tell us what needs doing and where.
Will there be a smell?
Some sealants have a smell while they cure, but it fades. Ventilation helps.
Can new sealant go over the old?
No. New silicone won’t bond to old silicone, and anything trapped underneath, including mould and water, stays there. It all has to come out first.
Is the work guaranteed?
Yes. All our work carries our one-year guarantee.
Are you insured?
Yes, we’re fully insured for domestic and commercial work.
What affects the quote in Creeksea
Jobs vary more than people expect. The main factors:
- Working hours on commercial sites
- How much old sealant there is and how hard it is to remove
- How many areas need sealing
- Any mould that needs treating
The cost depends on the amount of work, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts.
Helping us quote
When you call or email, it’s useful to know:
- How many joints, rooms or windows are involved
- What’s wrong with the joints now
- Pictures of the joints, sent by email
- If it’s domestic, commercial or a hotel
Every job is quoted individually, so start by telling us what you need. Just ring 0345 464 0079 or send us an email with the details and send pictures if you have them.
The process
When we arrive, we look over the joints with you first, so there are no surprises. We protect the surfaces around the joints before we start. The work usually takes anything from a few hours to several days, depending on how many gaps there are. Somewhere as small as Creeksea, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
How to prepare
- On commercial sites, let us know about site rules
- Mention any parking rules near the property
- Keep children and pets away from the work area
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work.
Read more
Work for landlords, hotels and businesses
Hotels need rooms back in use, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Fire rated sealant in Creeksea: local notes
Creeksea has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Community buildings like Church of All Saints are part of the picture too: gaps around pipes and cables are worth checking after any building work there. If you let a flat or house near Burnham-On-Crouch station, any gap left by new services in shared walls should be closed with a fire-rated product.
Creeksea is about 5 miles north-east of Rochford, in Essex. We provide fire rated sealant to householders, landlords and businesses in Creeksea and nearby, as part of our work across Essex. 644 places in Essex are on our list, large and small. For nearby work, see our Chelmsford page, about 15 miles away.
Here we cover the CM0 postcode area for fire rated sealant. Neighbouring places we cover for fire rated sealant include Ostend (1 mile north), Canewdon (2 miles south-west), Althorne (2 miles north-west), Ballards Gore (3 miles south-west) and Mayland (4 miles north). We also work in nearby towns such as Chelmsford (15 miles north-west), Basildon (15 miles west), Maldon (8 miles north-west), Canvey Island (12 miles south-west), Rayleigh (8 miles west) and Witham (13 miles north-west).
What’s near Creeksea
Typical jobs here are in homes near The Creeksea Ferry Inn. For rail, the closest station is Burnham-On-Crouch station, about 1 mile east of the centre. Green spaces nearby include Lion Creek and Lower Raypits.