Kent · England
External Mastic in Teasley Mead
Sealing brickwork movement joints, render, cladding and façade joints for homes and businesses in Teasley Mead and across Kent. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Water getting into walls through failed joints
- Plants rooting in failed movement joints
- Weathered mastic that no longer stretches
External mastic for homes and businesses in Teasley Mead
Movement joints let brickwork, render and cladding expand and shrink without cracking. Its sealant has to flex with the building, season after season, so once it splits or hardens, the joint stops working and water gets in. We are often asked to deal with cracked joints where brick meets render or frames and movement joints with cracked, split or missing sealant, across render & cladding joints, brickwork movement joints and joints between brick and frames.
Somewhere as small as Teasley Mead, homes and farm buildings often face open ground, where walls and rooflines take the weather head on. Joints on those walls need a sealant that moves with the building and stays in place.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Teasley Mead (TN3)
- Wider area
- Kent
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Signs you need external mastic in Teasley Mead
Poor preparation causes many early failures: joint faces that were dusty or damp, unprimed where they needed it, or still carrying old sealant. The new sealant then lets go long before it should.
Most people get in touch after spotting something like this:
- Rigid filler in a joint that should flex
- Gaps where render, brick and frames meet
- Hard, crazed mastic that has stopped moving
- Leaking joints around cladding and façade panels
Homes close to All Saints include some older properties, and older walls, gutters and the joints where extensions meet them need a flexible sealant.
Before booking anyone
- What the quote includes, VAT included or not
- Are they insured?
- How the joint is cleaned and prepared
- What guarantee comes with the work
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. A few tips:
- Deal with leaking gutters that soak the joints below
- Get split or bare joints resealed while the damage is small
- Point out the joints to other trades
- Avoid pressure-washing directly into sealant joints
Give the sealant the cure time we tell you before anything rubs against it. The surface skins over quickly, but full cure takes longer.
Leave a failed movement joint and water keeps getting into the wall. That can lead to damp patches, staining and frost damage which cost more to put right than the joint.
How the job changes by surface
Joints between dissimilar materials
Wherever two materials meet, they move differently. We seal the joint with a flexible exterior sealant so neither cracks the other.
Copings and trims
A failed coping joint lets water into the top of the wall. Sealing them early saves the wall below.
Also near Teasley Mead
More services for Teasley Mead
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Landlords, agents and businesses in Teasley Mead
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
If you manage several properties in or around Teasley Mead, several properties can go on one quote. Just tell us the addresses and what each one needs.
How the visit works
On the day, we start by going over the job with you. We protect the surfaces around the joints before any work begins. The work normally takes a few hours to a few days, depending on the length of joint and the access. Somewhere as small as Teasley Mead, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at every joint and agree a colour to suit the wall.
- We take out the old sealant until the faces are sound.
- Closed-cell backing rod is pushed in so the sealant bonds to two sides only.
- We prime the faces where required.
- We gun in low-modulus sealant and tool it neatly.
Before we arrive
- Try not to wet indoor joints just before the visit
- Let us know about earlier repairs to the joints
- Tell us if parking is tricky
Ask for a quote
Getting a quote is simple: tell us what needs doing and where. A few pictures by email make the job easier to understand, and we will come back to you with a quote.
Related advice
Why deal with it now?
Mortar or ordinary filler might look like a quick way to close an open joint, but it locks the joint solid. The movement then cracks the brickwork or render nearby. The correct repair is a flexible sealant with the right backing. Older cottages and farmhouses around Teasley Mead can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Call for a quick quote and we will go through it with you.
Why Teasley Mead clients choose us
- Approved under the ARBOMaster scheme
- Colour picked to suit the job
- Old sealant always removed completely
- Homes, businesses and hotels
Teasley Mead buildings and the weather
Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. With historic houses such as Groombridge Place (about 2.4 miles south-east) nearby, there’s older building stock in the area around Teasley Mead as well as newer homes. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.
Rented homes near Ashurst Kent station change hands often, and outside joints that have cracked can let damp into a rental, so check them between lets.
Teasley Mead is about 5 miles west of Royal Tunbridge Wells, in Kent. Our applicators cover external mastic for householders, landlords and businesses in Teasley Mead and nearby, as part of our work across Kent. Our area takes in 922 places across Kent, large and small. Crawley is on our list too, around 15 miles away.
Here we cover the TN3 postcode area for external mastic. We cover properties on Teasley Mead, Willetts Lane and Carriers Place. Other places close to Teasley Mead include Ashurst (1 mile south-east), Walter's Green (1 mile north-east), Stone Cross (1 mile east), Fordcombe (1 mile east) and Chiddingstone Hoath (2 miles north). We also work in nearby towns such as Sevenoaks (10 miles north), Royal Tunbridge Wells (5 miles east), Tonbridge (7 miles north-east), Kings Hill (15 miles north-east), Paddock Wood (11 miles east) and Southborough (5 miles east).
Landmarks near Teasley Mead
Around Teasley Mead, our work takes us to homes and buildings near The Sussex Oak Inn, among other places. Teasley Mead’s nearest station is Ashurst Kent station, roughly 0.6 miles south-east. Other landmarks nearby include Bolebroke Castle (2 miles south-west) and Kent and Sussex Hospital (5 miles east). Not far away are Broadwater Warren RSPB Reserve.
Teasley Mead questions
Do you cover smaller places like Teasley Mead?
Yes. Teasley Mead is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
I let a flat near Ashurst Kent station. Can you help?
Yes, we work for landlords and agents. Just phone 0345 464 0079 or email us and tell us about the property, and we’ll send you a clear quote.
Can I do it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
Can you seal over the old sealant?
No, because it fails. The old sealant always comes out first.
How long does the job take?
That depends on how much there is to do, but most jobs take a few hours for a handful of joints, longer for a whole elevation. We will give you a better idea when we quote.
What is backing rod for?
Closed-cell backing rod sets the depth of the sealant and stops it sticking to the back of the joint. That way it bonds to the two sides only and can stretch.
What is a movement joint?
A movement joint is a planned break in the wall that absorbs expansion and shrinkage. It’s sealed with a flexible sealant, not mortar.
Will it make a mess?
Tidy work is part of the job. We protect what’s around the joints.